Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 8520 CNC Controllers 8520-PS1

Product image is representative; revision or series may vary. Contact us to request a specific version.

8520-PS1

|
Need a Specific Revision?

Allen-Bradley 8520-PS1 Main Power Supply with a 5.35V DC (4A) at 50 C Rated Outputs and a 90-265V AC- 47-63Hz Input Range.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 8520-PS1

ManufacturerAllen Bradley
Product TypeMain Power Supply
Product Line8520 CNC Controllers
Part Number8520-PS1
Weight6.00 lbs (2.72 kg)
Rated Outputs5.35V dc (4A) @ 50 C
Line MonitorDetects Loss of AC Power
Hold Up Time6msec
Input Power Consumption225 Watts at 50 C
Input Fuse8A/250V
Input ConnectionTerminal Block
Rated Input115V230V ac-50/60Hz
Input Range90-265V ac- 47-63Hz
View as PDF
Request a Repair

The 8520-PS1 Main Power Supply Assembly by Allen-Bradley is the main power supply module for the Allen-Bradley 9/260 system and for the Allen-Bradley 9/290 CNC system. The 8520-PS1 Assembly supplies power to the operator panel power supply, to the system motherboard, and to the main CPU board. The power supply module is connected to the processor module via the P12 port, and it is connected to it through the terminal block. The 8520-PS1 has a rated nominal input voltage of 115 to 230 Volts AC at a frequency of 50 to 60 Hertz, with an input range of 90 to 265 Volts AC at a frequency of 47 to 63 Hertz, and it has a maximum power output of 225 Watts when it is used at a temperature of up 50 degrees Celsius. The 8520-PS1 has an 8A, 250 Volt AC fuse, which protects power from the supply module, and the color CRT, and the input line voltage is connected through the TB1 and the TB2 power supply strip. The 8520-PS1 Assembly can also be connected to the monochrome operator panel power supply, the operator interface assembly, and the MTB panel ON/OFF switch. The power supply module has an operational temperature range between 0 and 55 degrees Celsius (23 and 131 degrees Fahrenheit), at 5 to 95% non-condensing relative humidity range, and it has a storage temperature range between -30 and 70 degrees Celsius (-40 and 158 degrees Fahrenheit). The 8520-PS1 can withstand an operating vibration of 2.5G, and it remains functional at a height of up 1000 meters without derating.

Revision Part #Also known as
8520-PS1 Ser A8520-PS1/A, Series A, Rev A
Don't see your particular revision? Contact us now.