22A-B8P0N104

The 22A-B8P0N104 belongs to the PowerFlex 4 adjustable Frequency AC drives. This industrial electronic equipment is manufactured by Allen-Bradley, primarily used to modulate speed of AC motors in a wide variety of applications.

The 22A-B8P0N104 comes with a Sensorless Vectrol Control capability as well function as a Proportional + Integral + Derivative (PID) controller. With the PID control capability, the drive may act as a process controller itself and modulate the speed output on its own.

The 22A-B8P0N104 has an integrated RS485 communication port which allows the drive to be connected to a network of RS485 compatible devices.

The 22A-B8P0N104 has a fixed keypad, an integral IGBT brake and embedded I/O channels such as Three (3) Fixed discrete inputs assigned for START / STOP / REVERSE and Two (2) Fully Programmable inputs. It also has One (1) unipolar analog input compatible with electrical signals such as 0-10VDC or 4-20 mA. A pair of Normally Open (N.C.) and Normally Open (N.O.) contacts is also provided as Discrete output channels.

Aside from the RS485 communication interface, the 22A-B8P0N104 may also be installed with optional communication modules that supports globally recognized industrial protocols such as ProfiBus, BACnet, LonWorks, ControlNet, Ethernet I/P, DeviceNet and RS232.

The 22A-B8P0N104 has an output of 8.0 Amperes and motor rating of 1.5kW (2.0 HP).

The 22A-B8P0N104 PowerFlex 4 variable frequency drive by Allen-Bradley permits full control of machine speed. This drive is installed with a Human Interface Module (HIM) that grants users user-friendly interface for configuring and controlling the drive.

The 22A-B8P0N104 has an output power rating of 1.5 kW (2 Horsepower) and an output current of 8.0 Amps. The 22A-B8P0N104 has an input voltage range between 200 to 240 Volts AC and an input current rating of 9.5 Amps with a 4.5 KVA apparent power rating. It offers circuit protection through an Allen-Bradley 140M-C2E-C16 motor and an Allen-Bradley 100-C12 contactor and with 15 fuses. It dissipates 60 Watts of power (along the wire), in an IP20 open type of enclosure. It has an operational efficiency of 97.5%, and an output programmable frequency of 0 to 240 Hertz.

The 22A-B8P0N104 drive has built-in protection against 150% motor overload for 60 seconds and 200% motor overload for 3 seconds. It also offers protection against a 200% hardware limit (for 60 seconds), and a 300% instantaneous fault (for 3 seconds), with overcurrent and overvoltage protection. It has a digital control input with a source or sink mode which can be set to either of these modes through a DIP switch. The 22A-B8P0N104 also has additional analog control input and programmable output control. It has a modulated frequency range between 2 and 16 kHz, at an accuracy of +/-0.05% set in the digital input and 0.5% set in the analog input. It has a speed modulation with a +/-2% slip compensation based on speed across a 40 to 1 speed range. It has an operational vibration of 1 G and a maximum shock rating of 15 G for up to 11 milliseconds. It has a weight of 1.41 kilograms and dimensions of 152 x 80 x 166 millimeters.