25B-D024N114

The 25B-D024N114 is an Allen-Bradley PowerFlex 525 drive that comes as a 3-phase drive. The 25B-D024N114 features a voltage of 480 Volts AC with 24 Amps of output current and it features the IP20 NEMA open type enclosure. The 25B-D024N114 comes with a standard interface module and features the frame size of D with an EMC filtering option available. The 25B-D024N114 is an easy-to-install drive that features a modular design with an embedded EtherNet/IP port and it comes with an option for the dual-port EtherNet/IP adapter that has support for the DLR functionality. The 25B-D024N114 also features the LCD human-machine interface with multiple language support. The LCD screen supports programming through a MainFree USB and the 25B-D024N114 can be configured by using connected components. The 25B-D024N114 features support for the add-on profiles for the Studio5000 Logix Designer program allowing automatic configuration of the device through the installed program. The 25B-D024N114 also features a simple positioning control with an option for encoder cards and a conformal coating that meets the IEC 60721 3C2 standards. The Allen-Bradley PowerFlex 525 devices feature the low-voltage drives that are specially designed for use in compact industrial settings. The 25B-D024N114 also features a wide variety of power ratings with output currents that accommodate several different industrial purposes. The output current for the PowerFlex drives ranges from 2.5 Amps to 62.1 Amps with power ratings varying from 4 to 22 kilowatts. To allow for standardized communication, each of the drives under the PowerFlex 525 series uses an embedded EtherNet/IP port and it features the dual port option.

The 25B-D024N114 is a PowerFlex 525 module by Allen-Bradley and Rockwell Automation. Electrical specifications for the 25B-D024N114 include a voltage tolerance of -15%/+10%, a frequency tolerance of 47…63 Hertz, and a displacement power factor of 0.98 across the entire speed range. Additional electrical specifications include a maximum short circuit rating of 100,000 Amperes symmetrical, an actual short circuit rating that is determined by AIC rating of installed fuse/circuit breaker, and an Isolated Gate Bipolar Transistor (IGBT) transistor type. Control specifications for the 25B-D024N114 include a carrier frequency of 2...16 kHz with the drive rating based on 4 kHz, a digital input frequency accuracy within ±0.05% of set output frequency, an analog input frequency accuracy within 0.5% of maximum output frequency (10-Bit resolution), and an analog output frequency accuracy within ±2% of full scale, 10-Bit resolution. Additional control specifications include an output voltage range of 0 Volts to rated motor voltage, an output frequency range of 0...500 Hertz (programmable), and an efficiency of 97.5% (typical). This PowerFlex 525 module has 1 digital control input dedicated to stop and 6 digital that are programmable. It has a control input current of 6 milliamperes and two (2) isolated analog control inputs for -10...10 Volts and 4...20 milliamperes. The PowerFlex 525 also has control outputs, including 2 relay control outputs (1 Programmable, Form A, 1 Programmable, Form B). Opto control outputs include 2 Programmable outputs, and it also has 1 non-isolated 0...10 Volt or 4...20 milliampere analog control output.

The PowerFlex 525 has an incremental, dual channel encoder type with a supply of 12 Volts, 250 milliamperes. It has a duty cycle of 50%, +10%, and encoders must be line driver type, quadrature (dual channel) or pulse (single channel), 3.5...26 Volts DC output, single-ended or differential and capabe of supplying a minimum of 10 milliamperes per channel. Allowable input is DC up to a maximum frequency of 250 kHz. The encoder I/O automatically scales to allow 5 Volts, 12 Volts, and 24 Volts DC nominal voltages. Environmental specifications include a maximum altitude without derating of 1000 meters, or 3300 feet. With derating, the maximum altitude is 4000 meters, or 13,200 feet, with the exception of 600 Volt drives at 2000 meters (6,600 feet) maximum. The PowerFlex 525 also has a maximum surrounding air temperature without derating of -20 to 50 degrees Celsius (-4 to 122 degrees Fahrenheit), with derating being -20 to 60 degrees Celsius. The PowerFlex 525 must be stored in certain temperature ranges - for Frames A-D, it must be kept between -40 and 85 degrees Celsius, or -40 to 185 degrees Fahrenheit. For Frame E, it must be kept between -40 and 70 degrees Celsius, or -40 to 158 degrees Fahrenheit.