2098-DSD-HV030-SE

The Allen-Bradley 2098-DSD-HV030-SE is an Ultra 3000 Digital Servo Drive Module (with a Fiber Optic SERCOS command interface). This module can be used for a variety of motion control applications and architectures. There are two SERCOS fiber-optic cables in this module. The AC input voltage of this module is ranged from 230-480V AC (Three-Phase). The AC input frequency of this module is 47-63 Hz. The Bus capacitance of this module is 470 µF. The internal shunt resistance of this module is 120 Ohms. The SERCOS Communication rates of this module are 4 and 8 Mbps. The node addresses are from 01 to 99. This module contains components and assemblies that are sensitive to ESD (electrostatic discharge). Follow static control precautions when installing, testing, repairing, or repairing this assembly. The Allen-Bradley 2098-DSD-HV030-SE weighs 8.55 kg (18.8 lbs). This module has 9.54 x 14.2 x 5.46 in. (242.2 x 360.7 x 138.7 mm) dimensions. The relative humidity of this module is from 5-95% without condensation. The operating temperature of this module is 0-55 °C (32-131 °F). The storage temperature of this module is -40-70 °C (-40-158 °F). The Allen-Bradley 2098-DSD-HV030-SE has an operating shock of 15 g (3 pulses, 11 ms). The nonoperating shock of this module is 30 g (3 pulses, 11 ms). This module is designed to maintain optimum functionality at 2.5 g vibration. This module can operate at altitudes of up to 1000 m (3280 ft) without derating.

The 2098-DSD-HV030-SE is a Digital Servo Drive (DSD) by Allen-Bradley. This electronic, programmable device is part of the Ultra 3000 Series of Kinetix Motion Control systems. This servo drive module is used to provide interface for motion control commands and direct connection to the servo motor for implementing a closed-loop motion, digitally controlled motion control system.

The 2098-DSD-HV030-SE becomes operable when provided with an supply input voltage of 230 Volts AC - 480 Volts AC, 3-phase, along an input frequency of 47-63 Hertz. This drive has main input circuitry and auxiliary input circuitry that requires different input current ratings. For the drive’s main circuitry, it requires 4 Amperes @ 460 Volts AC rms, nominal and 460 Volts AC rms, maximum inrush of 6 Amperes. The auxiliary circuitry input current includes 0.55 Amperes @ 230 Volts AC rms, nominal; 0.35 Amperes @ 360 Volts AC rms, nominal; 0.25 Amperes @ 480 Volts AC rms, nominal. This servo drive is capable of providing a continuous output current of 7 Amperes and an intermittent output current of 14 Amperes while the continuous output power are 1.5 Kilowatts for 230 Volts AC input and 3.0 Kilowatts 460 Volts AC input.

The 2098-DSD-HV030-SE comes with a variety of terminal strips and connection interfaces mounted on the drive’s front panel. Terminal strip TB1 is used for termination of DC+ and DC- voltages; 3-Phase motor power connections; AC input power connections and auxiliary power connections. A cable shield clamp is located just below this terminal strip for clamping of shield cable. It also has TB2 terminal strip for installation of external passive shunt components. It also hosts the CN1 interface which are the terminals of the Normally Open (N.O.) contacts that can be used for energizing an external Start/Stop circuitry.