1719-IBN8
The Ex I/O 8 Point Digital Input NAMUR module has 1 Channel and has a 12 Volt DC rated Voltage. It has an unshielded wire type. The wire size is between 0.14 and 1.5 millimeters.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Ex I/O 8 Point Digital Input NAMUR module has 1 Channel and has a 12 Volt DC rated Voltage. It has an unshielded wire type. The wire size is between 0.14 and 1.5 millimeters.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1719-IBN8. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1719-IBN8 |
Product Line | Bulletin 1719 Ex I/O module |
Module Type | I/O Module |
Channels | 1 |
Rated Voltage | 12 Volts DC |
Wire type | Unshielded |
Wire size | 0.14 to 0.5 millimeters squared |
Communication Options | Ethernet/IP Port |
Area Rating | Zone 2, Class 1 |
Maximum Digital Input | 15 Kilohertz |
Self-Monitoring | Yes |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1719-IBN8 |
Product Line | Bulletin 1719 Ex I/O module |
Module Type | I/O Module |
Channels | 1 |
Rated Voltage | 12 Volts DC |
Wire type | Unshielded |
Wire size | 0.14 to 0.5 millimeters squared |
Communication Options | Ethernet/IP Port |
Area Rating | Zone 2, Class 1 |
Maximum Digital Input | 15 Kilohertz |
Self-Monitoring | Yes |
The 1719-IBN8 is a digital input Namur module device. It is manufactured by Allen-Bradley. It is an I/O module and it has a rated voltage of 12 Volts DC. It is a single-channel device. This module comes with a maximum digital input of 15 Kilohertz. The main purpose of this device is to act as an interface between field devices and process control systems. It operates with a frequency range between 5 and 500 Hertz. The 1719-IBN8 has a logic setting which can be selected for both negative and positive settings. A simulation mode is also available for service operations. It comes with various enhanced features. It can automatically detect faults in the line and alert the users. Both the open and short circuit line faults can be easily detected with this feature. Self-monitoring is available in this variant.
The 1719-IBN8 ships with a DLR adapter and optional power supply. The module provides HART 7 support. The module has a squared wire size between 0.14 and 0.5 millimeters. It is an unshielded wire. The module comes with a functional switch. There is a power supply module and different ports for field connections. An extension connection is also available with this drive. The 1719-IBN8 is an intrinsically safe distributed platform and it can only be mounted in Zone 2 or Class 1 area. A diagnostic screen is also present which shows information about the module. It has a screen which shows information in tabular form. A separate Ethernet/IP port is used to integrate the device in hazardous areas. This device consumes less power and it dissipates less heat than other input modules and it has proved to be a cost-effective industrial solution. It is resistant to vibrations and it has been certified to resist different gases.
What is the 1719-IBN8's rated voltage?
The 1719-IBN8's rated voltage is 12 Volts DC.
Does the 1719-IBN8 have a DLR adapter?
Yes, the has a DLR adapter?
What kind of area can the 1719-IBN8 operate in?
The 1719-IBN8 can operate in a Zone 2 or Class 1 area.
Does the 1719-IBN8 have an Ethernet/IP port?
Yes, the 1719-IBN8 has an Ethernet/IP port.
Can the 1719-IBN8 perform self-diagnosis?
Yes, the 1719-IBN8 can perform self-diagnosis.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1719-IBN8. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1719-IBN8 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1719-IBN8 Ser A
|
1719-IBN8/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1719-IBN8 |
Product Line | Bulletin 1719 Ex I/O module |
Module Type | I/O Module |
Channels | 1 |
Rated Voltage | 12 Volts DC |
Wire type | Unshielded |
Wire size | 0.14 to 0.5 millimeters squared |
Communication Options | Ethernet/IP Port |
Area Rating | Zone 2, Class 1 |
Maximum Digital Input | 15 Kilohertz |
Self-Monitoring | Yes |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1719-IBN8 |
Product Line | Bulletin 1719 Ex I/O module |
Module Type | I/O Module |
Channels | 1 |
Rated Voltage | 12 Volts DC |
Wire type | Unshielded |
Wire size | 0.14 to 0.5 millimeters squared |
Communication Options | Ethernet/IP Port |
Area Rating | Zone 2, Class 1 |
Maximum Digital Input | 15 Kilohertz |
Self-Monitoring | Yes |
The 1719-IBN8 is a digital input Namur module device. It is manufactured by Allen-Bradley. It is an I/O module and it has a rated voltage of 12 Volts DC. It is a single-channel device. This module comes with a maximum digital input of 15 Kilohertz. The main purpose of this device is to act as an interface between field devices and process control systems. It operates with a frequency range between 5 and 500 Hertz. The 1719-IBN8 has a logic setting which can be selected for both negative and positive settings. A simulation mode is also available for service operations. It comes with various enhanced features. It can automatically detect faults in the line and alert the users. Both the open and short circuit line faults can be easily detected with this feature. Self-monitoring is available in this variant.
The 1719-IBN8 ships with a DLR adapter and optional power supply. The module provides HART 7 support. The module has a squared wire size between 0.14 and 0.5 millimeters. It is an unshielded wire. The module comes with a functional switch. There is a power supply module and different ports for field connections. An extension connection is also available with this drive. The 1719-IBN8 is an intrinsically safe distributed platform and it can only be mounted in Zone 2 or Class 1 area. A diagnostic screen is also present which shows information about the module. It has a screen which shows information in tabular form. A separate Ethernet/IP port is used to integrate the device in hazardous areas. This device consumes less power and it dissipates less heat than other input modules and it has proved to be a cost-effective industrial solution. It is resistant to vibrations and it has been certified to resist different gases.
What is the 1719-IBN8's rated voltage?
The 1719-IBN8's rated voltage is 12 Volts DC.
Does the 1719-IBN8 have a DLR adapter?
Yes, the has a DLR adapter?
What kind of area can the 1719-IBN8 operate in?
The 1719-IBN8 can operate in a Zone 2 or Class 1 area.
Does the 1719-IBN8 have an Ethernet/IP port?
Yes, the 1719-IBN8 has an Ethernet/IP port.
Can the 1719-IBN8 perform self-diagnosis?
Yes, the 1719-IBN8 can perform self-diagnosis.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1719-IBN8. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1719-IBN8. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1719-IBN8 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1719-IBN8 Ser A
|
1719-IBN8/A, Series A, Rev A | Request Quote |