1719-TB6 | Allen Bradley PLC 1719 Ex I/O

1719-TB6

1719-TB6

Revisions: Ser A 
Description: The 1719-TB6 terminal block has been manufactured by Allen-Bradley as a terminal block for connecting to I/O modules and field devices in the 1719 Ex I/O series. It can be installed in a 1719 Ex I/O system by being wired to the field devices and attached to the front sockets of the input and output modules in the system. After the 1719-TB6 terminal block is attached to the front sockets of the I/O modules, its connection to them is tightened and secured with screws. This terminal block is a side-screw type of terminal block. The 1719-TB6 terminal block supports 6 poles.
Rated 4.9 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 1719-TB6

Add more parts to quote

Description: The 1719-TB6 terminal block has been manufactured by Allen-Bradley as a terminal block for connecting to I/O modules and field devices in the 1719 Ex I/O series. It can be installed in a 1719 Ex I/O system by being wired to the field devices and attached to the front sockets of the input and output modules in the system. After the 1719-TB6 terminal block is attached to the front sockets of the I/O modules, its connection to them is tightened and secured with screws. This terminal block is a side-screw type of terminal block. The 1719-TB6 terminal block supports 6 poles.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1719-TB6.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 6 reviews

    Technical Specifications for 1719-TB6

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1719-TB6
Product LineBulletin 1719 Ex I/O module
Module TypeTerminal Block Module
Poles6
Terminal screw torque0.22 to 0.25 N-m
Wire typeUnshielded
Wire size0.14 to 1.5 millimeters squared
Dimensions11.1 x 33.3 x 15.3 millimeters
Weight5 grams
Hazard RatingZone 1/0 or Class I, Div. 1
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1719-TB6
Product LineBulletin 1719 Ex I/O module
Module TypeTerminal Block Module
Poles6
Terminal screw torque0.22 to 0.25 N-m
Wire typeUnshielded
Wire size0.14 to 1.5 millimeters squared
Dimensions11.1 x 33.3 x 15.3 millimeters
Weight5 grams
Hazard RatingZone 1/0 or Class I, Div. 1
s

About 1719-TB6

The 1719-TB6 from Allen-Bradley is an Ex I/O terminal block with 6 poles. It is a screw type terminal block which has been engineered for hazardous area installations. It can be installed on an I/O module in a safe area or in Zone 1/0 or Class I, Div. 1 rated hazardous areas. Terminal blocks, which are made as either screw or spring terminals, are wired to devices in the field and they are connected to the front sockets of the I/O modules through screws which are tightened appropriately. The 1719-TB6 is compatible with the 1719-IJ I/O module which is a frequency counter. The dimensions of the 1719-TB6 are 11.1 x 33.3 x 15.3 millimeters and it weighs approximately 5 grams. The core cross-section of the 1719-TB6 is 0.14 to 1.5 square millimeters. It comes in a blue housing. Unshielded 0.14 to 1.5 square millimeters wire should be used with the 1719-TB6. The torque range for terminal screws is from a minimum of 0.22 to a maximum of 0.25 N-m.





To prevent a discharge which could lead to an explosion, the 1719-TB6 should be protected from electrostatic discharge. It must always be cleaned with a damp cloth and never with a dry cloth. Furthermore, the following precautions should be followed while working with the 1719-TB6: a grounded object should be touched to discharge potential static, an approved grounding strap should be worn, pins or connectors on the component boards should not be touched, a static-safe workstation should be used, and the 1719-TB6 should be stored in a static-safe packaging when it is not in use. The 1719-TB6 is not resistant to sunlight or other sources for ultraviolet radiation.



FAQ for 1719-TB6

How many poles does the 1719-TB6 have?


The 1719-TB6 has 6 poles.

What kind of wire does the 1719-TB6 use?


The 1719-TB6 uses unshielded 0.14 to 1.5 square millimeters.

What is the torque range for the 1719-TB6?


The 1719-TB6's torque range is 0.22 to 0.25 N-m.

What is the 1719-TB6's hazard rating?


The 1719-TB6's hazard rating is Zone 1/0 or Class I, Div. 1.

Is the 1719-TB6 resistant to ultraviolet radiation?


No, the 1719-TB6 is not resistant to ultraviolet radiation.

What is the 1719-TB6's core cross-section?


The 1719-TB6's core cross-section is 0.14 to 1.5 square millimeters.

Technical Description of 1719-TB6

The Ex I/O 6 Pole Screw Terminal module has 6 poles and a terminal screw torque of 0.22 to 0.25 N-m. It has an unshielded wire type. The size of the wire is between 0.14 and 1.5 millimeters squared.

Repair Services for 1719-TB6

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1719-TB6. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1719-TB6

Please refer to the manual for more information about the 1719-TB6 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1719-TB6 Ser A
1719-TB6/A, Series A, Rev A Request Quote
Common misspellings:
  • l719-TB6
  • 17l9-TB6
  • 1719-T86
  • 1719TB6

Dimensions For 1719-TB6

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1719-TB6

Resolutions For 1719-TB6

About

Technical Specifications for 1719-TB6

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1719-TB6
Product LineBulletin 1719 Ex I/O module
Module TypeTerminal Block Module
Poles6
Terminal screw torque0.22 to 0.25 N-m
Wire typeUnshielded
Wire size0.14 to 1.5 millimeters squared
Dimensions11.1 x 33.3 x 15.3 millimeters
Weight5 grams
Hazard RatingZone 1/0 or Class I, Div. 1
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1719-TB6
Product LineBulletin 1719 Ex I/O module
Module TypeTerminal Block Module
Poles6
Terminal screw torque0.22 to 0.25 N-m
Wire typeUnshielded
Wire size0.14 to 1.5 millimeters squared
Dimensions11.1 x 33.3 x 15.3 millimeters
Weight5 grams
Hazard RatingZone 1/0 or Class I, Div. 1

About 1719-TB6

The 1719-TB6 from Allen-Bradley is an Ex I/O terminal block with 6 poles. It is a screw type terminal block which has been engineered for hazardous area installations. It can be installed on an I/O module in a safe area or in Zone 1/0 or Class I, Div. 1 rated hazardous areas. Terminal blocks, which are made as either screw or spring terminals, are wired to devices in the field and they are connected to the front sockets of the I/O modules through screws which are tightened appropriately. The 1719-TB6 is compatible with the 1719-IJ I/O module which is a frequency counter. The dimensions of the 1719-TB6 are 11.1 x 33.3 x 15.3 millimeters and it weighs approximately 5 grams. The core cross-section of the 1719-TB6 is 0.14 to 1.5 square millimeters. It comes in a blue housing. Unshielded 0.14 to 1.5 square millimeters wire should be used with the 1719-TB6. The torque range for terminal screws is from a minimum of 0.22 to a maximum of 0.25 N-m.





To prevent a discharge which could lead to an explosion, the 1719-TB6 should be protected from electrostatic discharge. It must always be cleaned with a damp cloth and never with a dry cloth. Furthermore, the following precautions should be followed while working with the 1719-TB6: a grounded object should be touched to discharge potential static, an approved grounding strap should be worn, pins or connectors on the component boards should not be touched, a static-safe workstation should be used, and the 1719-TB6 should be stored in a static-safe packaging when it is not in use. The 1719-TB6 is not resistant to sunlight or other sources for ultraviolet radiation.



FAQ for 1719-TB6

How many poles does the 1719-TB6 have?


The 1719-TB6 has 6 poles.

What kind of wire does the 1719-TB6 use?


The 1719-TB6 uses unshielded 0.14 to 1.5 square millimeters.

What is the torque range for the 1719-TB6?


The 1719-TB6's torque range is 0.22 to 0.25 N-m.

What is the 1719-TB6's hazard rating?


The 1719-TB6's hazard rating is Zone 1/0 or Class I, Div. 1.

Is the 1719-TB6 resistant to ultraviolet radiation?


No, the 1719-TB6 is not resistant to ultraviolet radiation.

What is the 1719-TB6's core cross-section?


The 1719-TB6's core cross-section is 0.14 to 1.5 square millimeters.

Technical Description of 1719-TB6

The Ex I/O 6 Pole Screw Terminal module has 6 poles and a terminal screw torque of 0.22 to 0.25 N-m. It has an unshielded wire type. The size of the wire is between 0.14 and 1.5 millimeters squared.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1719-TB6. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1719-TB6. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1719-TB6 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1719-TB6 Ser A
1719-TB6/A, Series A, Rev A Request Quote

Common misspellings:
  • l719-TB6
  • 17l9-TB6
  • 1719-T86
  • 1719TB6
PDF