1719-TB8
The Ex I/O Chassis Extension Cable has 8 poles and a terminal screw torque of 0.22 to 0.25 N-m. It has an unshielded wire type. The size of the wire is between 0.14 and 1.5 millimeters squared.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Ex I/O Chassis Extension Cable has 8 poles and a terminal screw torque of 0.22 to 0.25 N-m. It has an unshielded wire type. The size of the wire is between 0.14 and 1.5 millimeters squared.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1719-TB8. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1719-TB8 |
Product Line | Bulletin 1719 Ex I/O module |
Module Type | Terminal Block Module |
Poles | 8 |
Terminal screw torque | 0.22 to 0.25 N-m |
Wire type | Unshielded |
Wire size | 0.14 to 1.5 millimeters squared |
Input Holes | 1 to 8 |
Dimensions | 1.6 x 0.6 x 0.4 inches |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1719-TB8 |
Product Line | Bulletin 1719 Ex I/O module |
Module Type | Terminal Block Module |
Poles | 8 |
Terminal screw torque | 0.22 to 0.25 N-m |
Wire type | Unshielded |
Wire size | 0.14 to 1.5 millimeters squared |
Input Holes | 1 to 8 |
Dimensions | 1.6 x 0.6 x 0.4 inches |
The Allen-Bradley 1719-TB8 is an Ex I/O 8 pole screw terminal. This terminal is used to simplify the installation of Allen-Bradley’s 1719 distributed I/O systems. The 1719-TB8 is an accessory that is available for field wiring. This 8-point terminal block is designed to enable the quick connection of various field devices to the front sockets of the Bulletin 1719 I/O modules. Wire connections on the terminal are secured by implementing the side screws. The color of the screw terminal is blue. The 1719-TB8 is not applicable to all I/O modules. The list of compatible I/O modules includes the 1719-CF4H (Ex I/O 4-Channel HART Analog-Configurable), the 1719-OB2 (Ex I/O 2 Point Digital Output 23 Volts), the 1719-OB2L (Ex I/O 2 Point Digital Output 16.5 Volts), and the 1719-ARM (Ex I/O Empty Slot Cover).
To prevent users from making a mistake and installing this terminal to an unsuitable module, the coding pins are applied. This securing accessory is pushed into the grooves visible from the front side of sockets on the I/O modules. This is a simple way to implement an exclusive assignment between I/O modules and their belonging screw terminal blocks. The dimensions of this 8-pin terminal are 40.9 millimeters by 15.3 millimeters by 11.1 millimeters (1.61 inches by 0.60 inches by 0.44 inches). The 1719-TB8 is connected or detached in a simple manner for the easy commissioning and maintenance of distributed I/O systems. Through these blocks, ground wires are connected, so these screw terminal blocks play a really important role when it comes to personal safety and equipment safety. The input holes on the terminal are clearly marked with numbers from 1 to 8.
How many points does the 1719-TB8 have?
The 1719-TB8 has 8 points.
Are the input holes on the 1719-TB8 marked?
Yes, the 1719-TB8's input holes are marked from 1 to 8.
Is the 1719-TB8 applicable to all I/O modules?
No, the 1719-TB8 is not applicable to all I/O modules.
Can the 1719-TB8 handle ground wires?
Yes, the 1719-TB8 can handle ground wires.
Can the 1719-TB8 use side screws for wire connections?
Yes, the 1719-TB8 can use side screws for wire connections.
Can the 1719-TB8 use coding pins for proper installation?
Yes, the 1719-TB8 can use coding pins for proper installation.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1719-TB8. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1719-TB8 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1719-TB8 Ser A
|
1719-TB8/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1719-TB8 |
Product Line | Bulletin 1719 Ex I/O module |
Module Type | Terminal Block Module |
Poles | 8 |
Terminal screw torque | 0.22 to 0.25 N-m |
Wire type | Unshielded |
Wire size | 0.14 to 1.5 millimeters squared |
Input Holes | 1 to 8 |
Dimensions | 1.6 x 0.6 x 0.4 inches |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1719-TB8 |
Product Line | Bulletin 1719 Ex I/O module |
Module Type | Terminal Block Module |
Poles | 8 |
Terminal screw torque | 0.22 to 0.25 N-m |
Wire type | Unshielded |
Wire size | 0.14 to 1.5 millimeters squared |
Input Holes | 1 to 8 |
Dimensions | 1.6 x 0.6 x 0.4 inches |
The Allen-Bradley 1719-TB8 is an Ex I/O 8 pole screw terminal. This terminal is used to simplify the installation of Allen-Bradley’s 1719 distributed I/O systems. The 1719-TB8 is an accessory that is available for field wiring. This 8-point terminal block is designed to enable the quick connection of various field devices to the front sockets of the Bulletin 1719 I/O modules. Wire connections on the terminal are secured by implementing the side screws. The color of the screw terminal is blue. The 1719-TB8 is not applicable to all I/O modules. The list of compatible I/O modules includes the 1719-CF4H (Ex I/O 4-Channel HART Analog-Configurable), the 1719-OB2 (Ex I/O 2 Point Digital Output 23 Volts), the 1719-OB2L (Ex I/O 2 Point Digital Output 16.5 Volts), and the 1719-ARM (Ex I/O Empty Slot Cover).
To prevent users from making a mistake and installing this terminal to an unsuitable module, the coding pins are applied. This securing accessory is pushed into the grooves visible from the front side of sockets on the I/O modules. This is a simple way to implement an exclusive assignment between I/O modules and their belonging screw terminal blocks. The dimensions of this 8-pin terminal are 40.9 millimeters by 15.3 millimeters by 11.1 millimeters (1.61 inches by 0.60 inches by 0.44 inches). The 1719-TB8 is connected or detached in a simple manner for the easy commissioning and maintenance of distributed I/O systems. Through these blocks, ground wires are connected, so these screw terminal blocks play a really important role when it comes to personal safety and equipment safety. The input holes on the terminal are clearly marked with numbers from 1 to 8.
How many points does the 1719-TB8 have?
The 1719-TB8 has 8 points.
Are the input holes on the 1719-TB8 marked?
Yes, the 1719-TB8's input holes are marked from 1 to 8.
Is the 1719-TB8 applicable to all I/O modules?
No, the 1719-TB8 is not applicable to all I/O modules.
Can the 1719-TB8 handle ground wires?
Yes, the 1719-TB8 can handle ground wires.
Can the 1719-TB8 use side screws for wire connections?
Yes, the 1719-TB8 can use side screws for wire connections.
Can the 1719-TB8 use coding pins for proper installation?
Yes, the 1719-TB8 can use coding pins for proper installation.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1719-TB8. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1719-TB8. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1719-TB8 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1719-TB8 Ser A
|
1719-TB8/A, Series A, Rev A | Request Quote |