The 5094-OF8IH module is an Allen-Bradley manufactured analog output module. It has 8 channels and it has been designed with HART technology. It is part of the FLEX 5000 series. The main function of the module is control and manage devices in a control system. The users can control the output module by using a local Ethernet/IP network. It can also help to control a Logix controller in an industrial system and an application process. It can easily offer current or voltage output signals that can be used to configure the settings of the outputs. This feature helps in remote configuration and in device troubleshooting when needed. The 8 output channels of the module are isolated individually. The current signal range of the module ranges between 4 and 20 milliamps. The 5094-OF8IH module comes with 16-bit resolution. It can drive 1000 Ohms of voltage and 750 Ohms of current maximum. It supports both open circuit and short circuit detection. The module uses the 32-bit floating point format as the data format.
The Allen-Bradley FLEX 5000 series 5094-OF8IH analog output module has a channel to channel isolation voltage rating of 250 Volts AC continuous with basic insulation. It can be programmed by using the R-Ladder DAC. It supports monotonicity without missing codes. The HART scan time of the module is 1 second. If a device has variables or configuration changes, the scan time will increase. The conversion time per channel for the voltage mode is 0.3 milliseconds, and in the current mode, the conversion time is 0.6 milliseconds at 25 degrees Celsius. The 5094-OF8IH analog output module supports the DLR, linear, start, and parallel network topologies. The module has been certified to be operated in a Class 1 Division II rated industrial environment.
Repair Services for 5094-OF8IH
||Ask|| Get Quote |
Our highly skilled technicians can repair your 5094-OF8IH. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.