The 5094-RTB3W block is an Allen-Bradley removable terminal block. The 5094-RTB3W terminal block is part of the FLEX 5000 terminal base assembly modules from Allen-Bradley. The FLEX 5000 terminal base assemblies are comprised of a mounting base and a removable terminal block. Terminal base assemblies are required as the terminal bases for Allen-Bradley FLEX 5000 I/O modules. FLEX 5000 I/Os are used with Logix 5000 controllers. The configuration of FLEX 5000 I/Os is done through the Studio 5000 Logix Designer software. The maximum sensor actuator power for the 5094-RTB3W terminal block is 10 Amps at 18 to 32 Volts DC. The maximum output ratings are 2 Amps at 125 Volts DC and 2 Amps at 240 Volts AC (50 to 60 Hertz). The maximum altitude at which the 5094-RTB3W terminal block should be installated is 2000 meters.
The operating temperature range for the 5094-RTB3W terminal block is -40 to 158 degrees Fahrenheit. More than 1 conductor should not be used to wire any terminal. The 5094-RTB3W terminal block is not resistant to sunlight or to other UV radiation sources. The 5094-RTB3W terminal block should be mounted in an enclosure which is ATEX/IECEx Zone 2 certified and which has an ingress protection rating of IP 54 at a minimum. THe equipment should not be installed or disconnected while power is switched on. The 5094-RTB3W terminal block is ESD-sensitive and therefore the following precautions should be followed while handling it: potential static should be discharged by touching a grounded object, an approved wriststrap should be worn, touching of pins or connectors on the boards should be avoided, and static-safe workstations should be used.
Repair Services for 5094-RTB3W
||Ask|| Get Quote |
Our highly skilled technicians can repair your 5094-RTB3W. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.