2201/02-01 | Allen Bradley PLC PLC 5

2201/02-01

Rated 4.6 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2201/02-01

Revisions: Ser A 
Description: The 2201/02-01 System Monitor is manufactured by Bently Nevada and operates with the Allen-Bradley PLC 5 series. The 2201/02-01 has a 0.7 A @ 5V DC Backplane Requirements.
Available Now
Request a quote for 2201/02-01

Description:

The 2201/02-01 System Monitor is manufactured by Bently Nevada and operates with the Allen-Bradley PLC 5 series. The 2201/02-01 has a 0.7 A @ 5V DC Backplane Requirements.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2201/02-01.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 12 reviews

    Technical Specifications for 2201/02-01

Part Number 2201/02-01
ManufacturerBently Nevada
Applicable Allen-Bradley SeriesPLC 5
Product TypeSystem Monitor
Backplane Requirements0.7 A @ 5V DC
Scan Rate24 Channels every 40 milliseconds
Part Number 2201/02-01
ManufacturerBently Nevada
Applicable Allen-Bradley SeriesPLC 5
Product TypeSystem Monitor
Backplane Requirements0.7 A @ 5V DC
Scan Rate24 Channels every 40 milliseconds
s

About 2201/02-01

The Bently Nevada/General Electric 2201/02-01 is a vibration monitoring system. When mounting the 2201/02-01 vibration monitoring system or any other Bently Nevada system, all of the recommended grounding procedures should be followed. Failure to properly ground the 2201/02-01 vibration monitoring system may lead to the presence of electrical noise or transients. Electrical noise and transients caused by poor grounding may be random in the time and frequency of their occurrences. As such, it becomes hard to solve transient-induced complications which may damage the motor. Additionally, electrical noise caused by grounding problems has wave shapes that are hard to capture or analyze.



Therefore, to protect the 2201/02-01 vibration monitoring system from grounding problems, use surge protective devices to limit surge voltages in the AC power and prevent the data signal circuits from drawing electrical noise from the power circuits connected to the 2201/02-01 vibration monitoring system. This can be achieved by observing the proper procedures for routing and grounding the field wiring and branch circuits and by separating the data signal wiring and the power wiring. Also, the 2201/02-01 vibration monitoring system should be grounded from a single point to ensure proper signal shielding. When grounding the 2201/02-01 vibration monitoring system, the technicians should be experts who understand the differences between the ground, ground bus, dirty ground, clean ground, intrinsic safe ground, and the instrument system ground. The Bently Nevada 2201/02-01 vibration monitoring system belongs to the wider General Electric 2201 series of monitoring systems. This series of monitoring systems use a specifically-designed backplane that mounts inside the Allen-Bradley 1771 universal I/O chassis that is in front of but not connected to the chassis backplane. The backplane provides the interconnection between the system monitor and each of the 4-channel monitors. Note that the backplane has 6 different configurations.



Repair Services for 2201/02-01

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2201/02-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 2201/02-01

Please refer to the manual for more information about the 2201/02-01 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2201/02-01 Ser A
2201/02-01/A, Series A, Rev A Request Quote
Common misspellings:
  • 22o1/02-01
  • 220l/02-01
  • 2201/o2-01
  • 2201/02-o1
  • 2201/02-0l
  • 2201/0201

Dimensions For 2201/02-01

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2201/02-01

Resolutions For 2201/02-01

About

Technical Specifications for 2201/02-01

Part Number 2201/02-01
ManufacturerBently Nevada
Applicable Allen-Bradley SeriesPLC 5
Product TypeSystem Monitor
Backplane Requirements0.7 A @ 5V DC
Scan Rate24 Channels every 40 milliseconds
Part Number 2201/02-01
ManufacturerBently Nevada
Applicable Allen-Bradley SeriesPLC 5
Product TypeSystem Monitor
Backplane Requirements0.7 A @ 5V DC
Scan Rate24 Channels every 40 milliseconds

About 2201/02-01

The Bently Nevada/General Electric 2201/02-01 is a vibration monitoring system. When mounting the 2201/02-01 vibration monitoring system or any other Bently Nevada system, all of the recommended grounding procedures should be followed. Failure to properly ground the 2201/02-01 vibration monitoring system may lead to the presence of electrical noise or transients. Electrical noise and transients caused by poor grounding may be random in the time and frequency of their occurrences. As such, it becomes hard to solve transient-induced complications which may damage the motor. Additionally, electrical noise caused by grounding problems has wave shapes that are hard to capture or analyze.



Therefore, to protect the 2201/02-01 vibration monitoring system from grounding problems, use surge protective devices to limit surge voltages in the AC power and prevent the data signal circuits from drawing electrical noise from the power circuits connected to the 2201/02-01 vibration monitoring system. This can be achieved by observing the proper procedures for routing and grounding the field wiring and branch circuits and by separating the data signal wiring and the power wiring. Also, the 2201/02-01 vibration monitoring system should be grounded from a single point to ensure proper signal shielding. When grounding the 2201/02-01 vibration monitoring system, the technicians should be experts who understand the differences between the ground, ground bus, dirty ground, clean ground, intrinsic safe ground, and the instrument system ground. The Bently Nevada 2201/02-01 vibration monitoring system belongs to the wider General Electric 2201 series of monitoring systems. This series of monitoring systems use a specifically-designed backplane that mounts inside the Allen-Bradley 1771 universal I/O chassis that is in front of but not connected to the chassis backplane. The backplane provides the interconnection between the system monitor and each of the 4-channel monitors. Note that the backplane has 6 different configurations.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2201/02-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2201/02-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 2201/02-01 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2201/02-01 Ser A
2201/02-01/A, Series A, Rev A Request Quote

Common misspellings:
  • 22o1/02-01
  • 220l/02-01
  • 2201/o2-01
  • 2201/02-o1
  • 2201/02-0l
  • 2201/0201
PDF