Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerMonitor 3000 1404-M505A-ENT

Product image is representative; revision or series may vary. Contact us to request a specific version.

1404-M505A-ENT

|
Need a Specific Revision?

The Allen-Bradley 1404-M505A-ENT module is a PowerMonitor 3000 master module. It has a power rating of 120 to 240 Volts AC and a frequency rating of 50 to 60 Hertz.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1404-M505A-ENT

ManufacturerAllen Bradley
CategoryPLCs
Product LinePowerMonitor 3000
Part Number1404-M505A-ENT
UPC611320609547
Weight2.06 lbs (0.94 kg)
Communication Rate10/100 Mbps
Concurrent Connections64 CIP/HTTP
Data read latencyless than 10 ms
Update rates for real-time metering data100 ms minimum
Update rates for logged data250 ms minimum
Communication PortsRS-485 and 10/100 BaseT Ethernet
Power Rating120/240V
Amperage Rating5 A
Frequency Rating0- 60 Hz
Operating Temperature0 - 50 degrees Celsius (32 - 131 degrees Fahrenheit)
Storage Temperature-40 - 85 degrees Celsius (-40 - 185 degrees Fahrenheit)
Humidity5 - 95%.
Vibration10-500 Hz: 2 g Operational (±0.012 in.)
Shock1/2 Sine Pulse, 11 ms duration: 30 g Operational and 30 g Nonoperational
Request a Repair

The 1404-M505A-ENT PowerMonitor 3000 module by Allen-Bradley/Rockwell Automation has the letters "ENT" at the end of its catalog number to indicate that it not only has a native RS-485 communication port but also an active 10/100 BaseT Ethernet communication port. The Ethernet port can connect to the Allen-Bradley 1761-NET-ENI, ControlLogix Ethernet Bridge, PLC-5E, and SLC 5/05 controllers. The users can use it with other network switches, bridges, hubs, and routers too.

The Allen-Bradley 1404-M505A-ENT module has a dual-port configuration, which makes the communication ports (the RS-485 and 10/100 BaseT Ethernet ports) able to operate concurrently. Before connecting the Ethernet network to the PowerMonitor module, the communication parameters should be configured. The parameters that need to be configured include the Subnet Mask, Gateway IP address, and Internet Protocol (IP) address configurations. Configure the IP address to enable the easy identification of the 1404-M505A-ENT PowerMonitor module on the network. Use the 4 decimal numbers and set each octet or byte ranging from 0 to 255 decimal, for instance, aaa.bbb.ccc.ddd. Set "192.168.254x" as the default IP address, where "x" is the unit’s ID number that is assigned by the manufacturer. Note that some IP addresses are not allowed such as "255.255.255.255." This PowerMonitor 3000 monitor has a power rating of 120/240 Volts AC, a current rating of 5 Amps, and a frequency rating of 50 to 60 Hertz.