Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Stratix 5700 1783-BMS20CL

Product image is representative; revision or series may vary. Contact us to request a specific version.

1783-BMS20CL

|
Need a Specific Revision?

The Allen-Bradley 1783-BMS20CL is an Allen-Bradley Stratix 5700 industrial managed Ethernet switch. This Ethernet switch is ideally used in implementing Ethernet I/P networks. It has Sixteen (16) Ports, composed of Twelve (12) Fast Ethernet Copper ports, Two (2) Gigabit Ethernet combo ports and Two (2) SFP slots for Fast Ethernet. This module is powered by an external supply of 24V DC.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1783-BMS20CL

ManufacturerAllen Bradley
Product typeManaged Ethernet switch
Product LineStratix 5700
Part Number1783-BMS20CL
UPC886739973538
Weight4.50 lbs (2.04 kg)
Alarm Relay1 A @ 30V DC or 0.5 A @ 48V DC
Wire size, ground connection4.0 mm2 (12 AWG) min, stranded copper wire
Wire size, alarm connection0.5…0.8 mm2 (20…18 AWG) solid or stranded, UL/CSA- rated style 1007 or 1569 twisted-pair copper appliance wiring material (AWM) wire, 6.3 mm (0.25 in.) ±0.5 mm (0.02 in.) strip length
Wire size, DC power connection0.5…0.8 mm2 (20…18 AWG) solid or stranded copper wire rated at 75 °C (167 °F) or greater, 1.2 mm (3/64 in.) insulation max, 6.3 mm (0.25 in.) ±0.5 mm (0.02 in.) strip length
Wire size, Ethernet connectionRJ45 connector according to IEC 60603-7, 2- or 4-pair Category 5e minimum cable according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702
Power Dissipation30 W
Power Supply12…48V DC
No. of Gigabit combo PortsTwo (2)
No. of Fast Ethernet Copper PortsSixteen (16)
No. of PortsTwenty (20);
Total ports20
Copper ports16
Fiber ports2
Combo ports2
Power input12 to 48 Volts DC
Operating temperature-40 to 60 degrees Celsius
Request a Repair

The 1783-BMS20CL switch is a 20-port Ethernet switch. In supervisor mode, the switch can gather information from the ring and can manage the DLR status and machine-level DLR diagnostics. The supervisor node also provides alternate routes when it detects a ring break. DLR is used in high-performance network applications that cannot tolerate network outage. Of the 20 switch ports, 16 are RJ45 Fast Ethernet ports, 2 are Fast Ethernet combo ports, and the remaining 2 are Fast Ethernet fiber ports. The 1783-BMS20CL switch runs on DC input ranging from 12 to 48 Volts DC. The minimum and maximum current draw of the switch are 0.5 Amps and 3 Amps, respectively. A SELV or Class 2 power supply should be used for the switch power. The typical power consumed by the 1783-BMS20CL switch is 21 Watts at 40 degrees Celsius and 24 Volts DC. The peak power consumption of the switch can reach 30 Watts. For isolation voltage, the 1783-BMS20CL switch has been type tested at 850 Volts DC for 60 seconds. The 1783-BMS20CL switch comes in an open enclosure with the T4 IEC temperature code. The weight and dimensions of the 1783-BMS20CLswitch are 2.04 kilograms and 5.1 x 5 x 5.3 inches. The operating temperature range for the 1783-BMS20CL switch is from -40 to 60 degrees Celsius. The Allen-Bradley 1783-BMS20CL is a managed Ethernet Switch that is part of the Stratix 5700 product category. This Ethernet switch supports a variety of topologies, including Device Level Ring (DLR) for resilient network.

This ethernet switch may be used to implement Common Industrial Protocol (CIP) over Ethernet. CIP is an industrial protocol supported by Open Device Vendor’s Association (ODVA), for communication with Logix controllers, for data exchange as well as interaction with visualization systems.

This managed Ethernet switch is provided with Twenty (20) ports composed of Sixteen (16) Fast Ethernet Copper ports (FE) supporting 10/100 Mbps, Two (2) Gigabit Ethernet compo ports supporting 1Gbps transmission speed and Two (2) Small Form-factor pluggable network interface slots for Fiber Optic, Gigabit Ethernet.

This managed Ethernet switch supports implementation of Linear, Star, Device Level Ring and other topologies to fit industrial Ethernet networking requirements. This managed Ethernet switch has Eight (8) Fast Ethernet copper ports and Two (2) Gigabit Ethernet ports.

This Ethernet switch does not require a backplane for installation. It is a stand-alone device externally powered by a power supply unit that provides 0.5…3.0 A maximum Current @ 12-48VDC Voltage range with Class 2/Safety Extra Low Voltage (SELV).

The 1783-BMS20CL has an open-type enclosure. It requires installation inside an enclosure that offers protection to field contaminants and elements such as dirt, dust, moisture, water and other elements. The module’s required operating temperature is -40…+60 Degree Celsius or -40…+140 Degree Fahrenheit with maximum surrounding air of 60 Degree Celsius or 140 Degree Fahrenheit.