Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1403 Powermonitor II 1403-MM05A

1403-MM05A

|
Need a Specific Revision?

The Allen-Bradley 1403-MM05A Master Module has 5 Current Inputs, a 120V/240V AC 50/60 Hz or 125V/250V DC Power Supply, and a 120V-347V Nominal Full Scale Voltage Input.

Available
Request a quote
Fast response
$3201
Ships Mon, Jun 23
3 in stock
$1172
Ships Mon, Jun 23
9 in stock
Ships Mon, Jun 23.
In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more
  • Warranty

    We sell industrial automation parts backed by our 2-year DO Supply Warranty.

  • Shipping

    Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.

  • Payment Methods

    AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.

  • Repairs & Exchanges

    Repairs and exchanges are available for all automation products.

  • Reseller Options

    Drop shipping, blind shipping, and account shipping with no extra fees.

Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for 1403-MM05A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1403-MM05A
Product TypeMaster Module
Current Inputs5
Power Supply120 to 240 Volts AC 50/60 Hertz or 125 or 250 Volts DC
Nominal Full Scale Voltage Input120 to 347 Volts
Input Impedance1 Meg-Ohm per minute
Nominal Full-Scale Current Input0 to 5 Amps
Status InputsInternal 24 Volts DC
Motor Load Switching1/3 Horsepower at 125 Volts AC
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
View as PDF
Request a Repair

The 1403-MM05A is a Power Monitor II Series Master Module manufactured by Allen-Bradley.  The 1403-MM05A comes with a microprocessor-based digital instrument that helps in integrating various parameters into industrial and commercial automation systems. The 1403-MM05A comes with onboard microprocessors with advanced field configuration communication interfaces. These allow the 1403-MM05A to act as either a standalone monitoring device or a control device. Therefore, the 1403-MM05A can be used in any large energy monitoring network. The 1403-MM05A supports a nominal measured current of 5 Amps and a measured voltage of 120 Volts to 347 Volts L-N (208 Volts to 600 Volts L-L). The 1403-MM05A’s power supply rating is 120 to 240 Volts AC at 50 to 60 Hertz or 125 to 250 Volts DC. The 1403-MM05A has a smart communications card that provides it with two active ports for communication. The ports take the Allen-Bradley PLC RI/O network while the other port takes Allen-Bradley DF-1 Protocol. In addition, the 1403-MM05A has Ethernet communication cards. These provide it with two communication ports that use 10BaseT and 10Base5 Ethernet ports and an RS-232 Configuration Port. The single and dual-port high-speed communication modules cover a variety of networks. The Ethernet Communication Card makes the 1403-MM05A a TCP/IP compatible master module.

The 1403-MM05A meets the IEEE 519 power quality pass standards and it can be used globally. In addition, the 1403-MM05A Master Module accepts up to three display modules. When it comes to the voltage inputs, the 1403-MM05A supports nominal full-scale input of 120 Volts to 347 Volts and the input impedance is 1M ohm minimum. The 1403-MM05A control relay ratings are a maximum resistive load switching of 10 Amps at 250 Volts. This translates to 2500 Volts AC. On the other side, the minimum Load Switching is 10 Amps at 24 Volts. For the DC rating, the maximum resistive load switching is 10 Amps at 30 Volts and 0.25 Amps at 250 Volts. In DC voltage, the minimum load switching is 10 Amps at 24 Volts.

Revision Part #Also known as
1403-MM05A Ser A1403-MM05A/A, Series A, Rev A
Request a quote
1403-MM05A Ser B1403-MM05A/B, Series B, Rev B
Request a quote
1403-MM05AX1403-MM05A/X, Series X, Rev X
Request a quote
Don't see your particular revision? Contact us now.