The Allen-Bradley 2711P-RP1 Logic Module has 64 MB Flash Memory, 64 MB RAM Memory, and a DC Input. It also contains an Ethernet Port, Serial Port, 2 USB ports, and CompactFlash Card Slot.
|Warranty:||1 year DO Supply Warranty Included|
|Shipping:||Worldwide shipping via DHL, UPS, Fedex, and TNT|
|Repairs:||We offer repair service for the 2711P-RP1.|
|Exchange:||Exchange credit for your defective unit available.|
The Allen-Bradley 2711P-RP1 is a PanelView Plus logic module. This module is combined with Allen-Bradley PanelView series display modules to form a fully operating HMI unit. It is compatible with the PanelView Plus 700 to 1500 series display modules, but not with the PanelView Plus 6 terminals. The 2711P-RP1 has a 24 Volts DC power supply connector on the back side of the device. While operating, this unit consumes 70 Watts of energy. The 2711P-RP1 is compatible with many PanelView Plus terminals. The 2711P-RP1 has 64 MB of flash memory and 64 MB of RAM. It is bolted with 6 screws to the display module and it can carry a communication module which is attached to it after removing the grey label on the back side of the logic module. Always make sure that the display module is not power supplied when connecting the logic module to it. The WordPad text editor, Media Player, and remote desktop connection are some of the extended optional features available with this module.
The 2711P-RP1 supports 2 USB connectors, 1 RS-232 connector, and 1 Ethernet port. It also has one CompactFlash Card Slot for inserting memory cards. Do not insert memory cards while the device is powered on. The 2711P-RP1 logic module is configurable with the FactoryTalk View ME Software to support both simple and complex industrial automation applications. The module works safely only in surroundings with an ambient temperature between 0 and 55 degrees Celsius. The only maintenance that this unit requires is a visual inspection of the connectors and some cleaning from accumulated dust from time to time. The 2711P-RP1 works on 24 Volts of DC power. This module has built-in status indicators for process identification. Other slots available are the USB, CompactFlash, and Ethernet slots for efficient communication.
Question: The indicators on my PanelView Plus 700-1500 will not turn on. What does this mean?
Answer: If the indicators do not turn on after startup, either the logic module or power supply has failed. Check the power cable first, and if the power is not in range, simply replace the power supply. However, if the power supply is within range, the logic module, such as the 2711P-RP1 must be replaced.
Question: Is the 2711P-RP1 the assembled terminal part number?
Answer: No, the 2711P-RP1 is just a logic module, it requires a display module (such as 2711P-RDT10C or 2711P-RDT7C) to operate. The combined terminal includes both a display module and a logic module. The combined terminal part number can be found on the back of the logic module normally on a green or white sticker.
Question: Can this module be purchased with a warranty?
Answer: Yes, the 2711P-RP1 comes with a free one-year warranty from DO Supply, Inc.
Question: Where can I send the 2711P-RP1 to be repaired?
Answer: DO Supply, Inc. offers a variety of repair services for the 2711P-RP1.