2711P-RP1D | Allen Bradley Logic Modules

×

2711P-RP1D

Rated 5 with 12 reviews
About | Product Specifications | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711P-RP1D

Description: The 2711P-RP1D logic module is a Panelview Plus logic module that has been designed and manufactured by Allen-Bradley/Rockwell Automation. It runs on isolated DC input voltage. The 2711P-RP1D logic module is meant to be installed on the back of a Panelview Plus 700 to 1500 series display terminal to form a complete Panelview Plus 700 to 1500 control terminal. This logic module has 64 MB of RAM and 64 MB of internal CompactFlash memory. The 2711P-RP1D logic module comes with several ports which include a serial port, an Ethernet port, a CompactFlash card slot, and 2 USB ports.
Available Now
Request a quote for 2711P-RP1D

Description: The 2711P-RP1D logic module is a Panelview Plus logic module that has been designed and manufactured by Allen-Bradley/Rockwell Automation. It runs on isolated DC input voltage. The 2711P-RP1D logic module is meant to be installed on the back of a Panelview Plus 700 to 1500 series display terminal to form a complete Panelview Plus 700 to 1500 control terminal. This logic module has 64 MB of RAM and 64 MB of internal CompactFlash memory. The 2711P-RP1D logic module comes with several ports which include a serial port, an Ethernet port, a CompactFlash card slot, and 2 USB ports.
About | Products Specs | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711P-RP1D.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 12 reviews

    Technical Specifications for 2711P-RP1D

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711P-RP1D
Product TypeLogic Module
SeriesPanelView Plus 700 to 1500 Logic Modules
Flash Memory64 MB
RAM Memory64 MB
InputIsolated DC
FeaturesEthernet Port, Serial Port, 2 USB ports, and CompactFlash Card Slot
Compatibility Not Compatible with the PanelView Plus 6 Terminals
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711P-RP1D
Product TypeLogic Module
SeriesPanelView Plus 700 to 1500 Logic Modules
Flash Memory64 MB
RAM Memory64 MB
InputIsolated DC
FeaturesEthernet Port, Serial Port, 2 USB ports, and CompactFlash Card Slot
Compatibility Not Compatible with the PanelView Plus 6 Terminals
s

About 2711P-RP1D

The 2711P-RP1D is a PanelView terminal and a logic module from the Allen-Bradley. The 2711P-RP1D PanelView terminal has 64 MB RAM and an isolated DC output. The 2711P-RP1D PanelView terminal also has a 64 MB flash memory and it is also Marine certified. The weight of the 2711P-RP1D PanelView terminal is 2.00 pounds and it also has a color graphics display with a keypad and a touchscreen support. The ControlNet module is the communication module used on the 2711P-RP1D display terminal. It also contains a 10/100 Base T Ethernet port. To prevent the 2711P-RP1D’s touchscreen from damage, it is recommended that the users apply a bare finger, gloved finger, or a plastic stylus device with a minimum tip radius of 1.3 millimeters. During the installation of the 2711P-RP1D PanelView terminal, it is recommended that the installation is done in an environment that is free from atmospheric gases that have an ignition temperature which is less than 135 degrees Celsius. It is also recommended that the installation is done in an environment that is free from direct ultraviolet and infrared radiations that may come from the sun. Where the ambient temperature is below 0 degrees Celsius, the use of a heater is recommended in order to warm it up. In areas with high temperatures and in high altitude areas, the use of a fan for active cooling is advised. The 2711P-RP1D should be mounted in a vertical position away from other devices and surfaces.



The 2711P-RP1D is a single platform logic module that can also be remotely powered by using the 2711P-RSACDIN as an isolated DC power source. Users can directly reset the terminal without the need to disconnect and resupply the power. It allows complex computations, improving understanding of the derived results and saving time. The communication module should be removed before replacing the logic module from the terminal to avoid loss of data. There are dedicated slots for USB and Ethernet connectivity.  It is strictly advised to keep the input isolated from the power supply and not connected to the ground. Third-party support, VNC server, and FTP server support are some of the standard features available with the logic module 2711P-RP1D. The 2711P-RP8D is used for those applications that require PanelView Plus 6 terminals. The block of the terminal (700 to 1500) generally depends on the logic block used. The 2711P-RP1D uses a 3-position terminal block since it runs on DC power and belongs to the D series.

FAQ for 2711P-RP1D

What is the price of 2711P-RP1D?


Submit a quote request, send us an email or call 800-730-0292 for our best price.

Does DO Supply Inc. offer repairs for part 2711P-RP1D?


Yes. Our highly skilled technicians can repair your 2711P-RP1D. All our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process

Technical Description of 2711P-RP1D

The Allen-Bradley 2711P-RP1D Logic Module has 64 MB Flash Memory, 64 MB RAM Memory, and a Isolated DC Input. It also contains an Ethernet Port, Serial Port, 2 USB ports, and CompactFlash Card Slot.

Repair Services for 2711P-RP1D

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
X

Revisions for 2711P-RP1D

Please refer to the manual for more information about the 2711P-RP1D such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-RP1D Ser A
2711P-RP1D/A, Series A, Rev A Request Quote
2711P-RP1DX
2711P-RP1D/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l1P-RP1D
  • 271lP-RP1D
  • 2711P-RPlD
  • 2711PRP1D

Dimensions For 2711P-RP1D

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2711P-RP1D

Resolutions For 2711P-RP1D

About

Technical Specifications for 2711P-RP1D

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711P-RP1D
Product TypeLogic Module
SeriesPanelView Plus 700 to 1500 Logic Modules
Flash Memory64 MB
RAM Memory64 MB
InputIsolated DC
FeaturesEthernet Port, Serial Port, 2 USB ports, and CompactFlash Card Slot
Compatibility Not Compatible with the PanelView Plus 6 Terminals
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711P-RP1D
Product TypeLogic Module
SeriesPanelView Plus 700 to 1500 Logic Modules
Flash Memory64 MB
RAM Memory64 MB
InputIsolated DC
FeaturesEthernet Port, Serial Port, 2 USB ports, and CompactFlash Card Slot
Compatibility Not Compatible with the PanelView Plus 6 Terminals

About 2711P-RP1D

The 2711P-RP1D is a PanelView terminal and a logic module from the Allen-Bradley. The 2711P-RP1D PanelView terminal has 64 MB RAM and an isolated DC output. The 2711P-RP1D PanelView terminal also has a 64 MB flash memory and it is also Marine certified. The weight of the 2711P-RP1D PanelView terminal is 2.00 pounds and it also has a color graphics display with a keypad and a touchscreen support. The ControlNet module is the communication module used on the 2711P-RP1D display terminal. It also contains a 10/100 Base T Ethernet port. To prevent the 2711P-RP1D’s touchscreen from damage, it is recommended that the users apply a bare finger, gloved finger, or a plastic stylus device with a minimum tip radius of 1.3 millimeters. During the installation of the 2711P-RP1D PanelView terminal, it is recommended that the installation is done in an environment that is free from atmospheric gases that have an ignition temperature which is less than 135 degrees Celsius. It is also recommended that the installation is done in an environment that is free from direct ultraviolet and infrared radiations that may come from the sun. Where the ambient temperature is below 0 degrees Celsius, the use of a heater is recommended in order to warm it up. In areas with high temperatures and in high altitude areas, the use of a fan for active cooling is advised. The 2711P-RP1D should be mounted in a vertical position away from other devices and surfaces.



The 2711P-RP1D is a single platform logic module that can also be remotely powered by using the 2711P-RSACDIN as an isolated DC power source. Users can directly reset the terminal without the need to disconnect and resupply the power. It allows complex computations, improving understanding of the derived results and saving time. The communication module should be removed before replacing the logic module from the terminal to avoid loss of data. There are dedicated slots for USB and Ethernet connectivity.  It is strictly advised to keep the input isolated from the power supply and not connected to the ground. Third-party support, VNC server, and FTP server support are some of the standard features available with the logic module 2711P-RP1D. The 2711P-RP8D is used for those applications that require PanelView Plus 6 terminals. The block of the terminal (700 to 1500) generally depends on the logic block used. The 2711P-RP1D uses a 3-position terminal block since it runs on DC power and belongs to the D series.

FAQ for 2711P-RP1D

What is the price of 2711P-RP1D?


Submit a quote request, send us an email or call 800-730-0292 for our best price.

Does DO Supply Inc. offer repairs for part 2711P-RP1D?


Yes. Our highly skilled technicians can repair your 2711P-RP1D. All our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process

Technical Description of 2711P-RP1D

The Allen-Bradley 2711P-RP1D Logic Module has 64 MB Flash Memory, 64 MB RAM Memory, and a Isolated DC Input. It also contains an Ethernet Port, Serial Port, 2 USB ports, and CompactFlash Card Slot.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
X
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
X
Revisions

Please refer to the manual for more information about the 2711P-RP1D such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-RP1D Ser A
2711P-RP1D/A, Series A, Rev A Request Quote
2711P-RP1DX
2711P-RP1D/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l1P-RP1D
  • 271lP-RP1D
  • 2711P-RPlD
  • 2711PRP1D
PDF
2711P-RP1D PDF