The Allen-Bradley 2711P-RW2 is an internal CompactFlash card that is installed inside the PanelView Plus logic module.

The 2711P-RW2 is available in a variety of series. It is available in Series B-J where a Series B Internal CompactFlash being compatible with Series A 2711P-RPx logic module, Series C and Series D for Series B Logic Module, Series E for Series C Logic module, Series F for Series D Logic Module, Series G for Series E Logic Module, Series H for Series F Logic Module and Series J for Series G logic module.



The CompactFlash card is located inside the Logic module. The card’s installation slot is located above the RAM module. It is held by retaining screw clips that can be easily disengaged by loosening the retaining screw.

Before attempting any works to the internal circuitry, statis electricity mush be discharge. As the CompactFlash card requires accessing the circuitry, place the logic module on a table with means of discharging static electricity. Additionally, wear anti-static wrist bands if possible, to further reduce that risk of damage due to electrostatic discharge. This card must be removed when the module is without power.

The card is secured into place by a retaining clip screw.

To install or replace the 2711P-RW2 internal Compact Flash Card, unscrew the retaining screw and after installing a new Compact Flash Card screw back the retaining screws. The 2711P-RW2 should be installed in the logic module before fixing the module onto the rear side of the PanelView display module. The power supply to the PanelView should be disconnected when installing the 2711P-RW2 module. The 2711P-RW2 is compatible with the 6189-RPEH VersaView CE and the 2711P-RP7 logic modules. Note that the logic module can be ordered already fitted with the 2711P-RW2 internal CompactFlash Card minimizing the need to install the CompactFlash separately. The CompactFlash card, together with the PanelView terminal, should be operated within industrial environments that meet the required certifications for humidity, temperature, and pollution levels.