2711-T10C1L1 Ser B
2711-T10C1L1/B, Series B, Rev B
The 2711-T10C1L1 operator terminal is a standard operator terminal from the Allen-Bradley/Rockwell Automation Panelview 1000 series. It is controlled by a touchscreen which is 10 inches wide. The 2711-T10C1L1 operator terminal's touchscreen supports full color graphics for its data displays and for its menus and control items. This standard operator terminal is DC-powered. The 2711-T10C1L1 standard operator terminal has a Remote I/O communication port.
-
We sell industrial automation parts backed by our 2-year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for 2711-T10C1L1
| Input Type | Touch |
|---|---|
| Brand | Allen-Bradley |
| Manufacturer: | Rockwell Automation |
| Product Family: | PanelView Standard Terminals |
| Product Type: | PanelView 1000 Standard Operator Terminals |
| Display Type: | Active Matrix Thin-Film Resistor (TFT) with Cold Cathode Fluorescent (CCF) Backlight |
| Display Area: | 211 x 158 mm (8.3 x 6.2 in.) |
| Resolution: | 640 x 480 pixels |
| Backlight: | 100,000 hr LED backlight life |
| Touchscreen: | 384 (24 columns x 16 rows) |
| Touch Cell size: | 26 x 30 pixels |
| Application memory: | 1008K bytes (application screens) |
| Communication ports: | Remote I/O (RIO); RS232 (printer) |
| Input Voltage range: | 18…32V DC (24V DC nominal supply) |
| Operating Temperature: | 0…55 ° C (32…131 ° F) |
| Heat Dissipation: | 39 W (132 BTU/HR) |
| Part Number/Catalog No. | 2711-T10C1L1 |
| Product Line | Panelview 1000 |
| Display Size | 10.1 in. |
| Display Color | Multi-Color |
| Communication | Printer (RS-232) Port and Remote I/O |
| Input Power | 24 Volts Direct Current |
| Memory | 256 Kilobytes |
| Enclosure Type | NEMA Type 12/13 or 4X |
| Product Lifecycle Status* | Discontinued/Obsolete |
* The Allen Bradley 2711-T10C1L1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-T10C1L1 units instead of migration.
The 2711-T10C1L1 by Allen-Bradley is part of the PanelView 1000 series and is engineered to allow users to interface effectively with a machine. This module has a multi-color display screen of 10 inches diagonally, which doubles as the operator interface via the touchscreen input. Its 8.3 x 6.2 inch display has a resolution of 640 x 480, which is made up of 384 touch cells. Its backlight can last for a half-life of 50,000 hours at 25 degrees Celsius and its battery-backed clock will timestamp information marked as important. With 256 KB of application runtime memory and 1008 KB of nonvolatile memory, this module can store a good amount of data and commands; it does, however, support an ATA flash memory card as an additional, external memory option. The 2711-T10C1L1 requires at least 24 Volts of DC power to operate, consuming approximately 24 Watts (1.0 A at 24 Volts DC). With a weight of 3.6 kilograms (approximately pounds) and dimensions of 282 x 370 x 112 millimeters (11.11 x 14.58 x 4.40 inches), the 2711-T10C1L1 module is a relatively small unit to install. When installing the main unit, all connecting power sources should be completed shut off. This unit’s clock battery can be replaced in the field. Each 2711-T10C1L1 module features a durable NEMA Type 12/13 or 4X enclosure, which helps it withstand temperatures up to 131 degrees Fahrenheit while operating. It can also operate in temperatures as low as 32 degrees Fahrenheit (or freezing point, for water), although ideally it should be kept between the two extremes. When mounting the 2711-T10C1L1, keep in mind that at an altitude higher than 2000 meters, this module will begin to disintegrate at a much quicker rate than normal.
The Allen-Bradley graphic operator terminal with catalog number 2711-T10C1L1 is a visualization hardware mainly used to enable operators conveniently control a process or machine via a 10.1-inch colored display screen and analog resistive touch input interface.
This operator terminal is part of the discontinued PanelView Standard Operator terminals that is suitable for installation to different industries of specific and general-purpose applications. The PanelView operator terminals are also popular especially with machine builders. The 2711-T10C1L1 is typically installed flush mounted to a NEMA Type 12/13, 4X (Indoor use only) IP54, IP65 rated enclosures.
The 2711-T10C1L1 has a Remote I/O (RIO) communication port, allowing communication over long distances in daisy-chain topology. It also has an RS232 printer interface port allowing communication with alarm and events printer for documentation of process abnormalities and events. This operator terminal also has a battery-backed real-time clock which may be configured to timestamp critical data.
It allows offline configuration and comes with a variety of tools for debugging and commissioning of the system.
When installing this operator terminal to an enclosure, maintain an operating temperature of 0-55 Degree Celsius and limit vibration and shock within 2 g up to 2,000 Hz and 15 g respectively. The operator terminal’s heat dissipation is 39 W (132 BTU/HR) for both Color and Grayscale terminals.
The 2711-T10C1L1 is designed to be wired with a supply voltage range of 18-32VDCs a maximum power consumption of 24 W max (1.0A @ 24V DC).