Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Panelview Component 2711C-K2M

2711C-K2M Ser B

|

2711C-K2M/B, Series B, Rev B

The Allen-Bradley 2711C-K2M terminal is an operator terminal from the Panelview Component series of operator terminals. Its input option is a keypad with numeric and function keys. The 2711C-K2M operator terminal?s screen is only 2 inches wide and it only supports monochrome graphics. It has a yellow and green status indicator light that has a minimum half life of 50,000 hours and that is not replaceable. The 2711C-K2M operator terminal has a USB device port for programming and its input voltage range is from 18 to 30 Volts DC.

Ships Monday, June 23.
Availability is shown for 2711C-K2M. Request a quote for series-specific details.
2 Year DO Supply Warranty
In Stock
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more
  • We sell industrial automation parts backed by our 2-year DO Supply Warranty.

  • Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.

  • AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.

  • Repairs and exchanges are available for all automation products.

  • Reseller Options

    Drop shipping, blind shipping, and account shipping with no extra fees.

Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more

About 2711C-K2M Ser B

The 2711C-K2M Series B terminal is a keypad terminal designed by Allen-Bradley. It is a C200 series terminal. Its screen is 2 inches in size and its graphics are monochrome. The main part of this component is the integrated keypad which comes with the terminal. The terminal is powered with a 24 Volts DC power supply. The maximum power consumption of the terminal is 5 Watts. The display panel used on this terminal is a Transflective STN passive matrix LCD. It can display a maximum resolution of 122 x 32 pixels and it can be viewed from different angles without any degradation in the graphics colors. The 2711C-K2M Series B terminal comes with 10 function keys that are used for commonly used shortcuts and it comes with navigation keys and control keys. A nameplate label is installed on the front side of the panel. The terminal is 5.47 inches long, 2.15 inches wide, and 4.69 inches high and it has minimal installation depth.

The Allen-Bradley 2711C-K2M Series B terminal uses the RS-232 port and the RS-485 port for internal communications. The communication port follows the DH-485 and DF1 protocols. The display panel of the terminal is illuminated by a 50,000-hour mini backlight. The enclosure of the terminal is an IEC rated with an IP 54/65 enclosure protection rating. It is resistant to water splashes and damage. The 2711C-K2M Series B terminal is equipped with alarm messages which include embedded variables that can be set as required by the operators. The terminal can upload and download groups of data or parameter settings by using the base recipe capability. This terminal features advanced screen security features that prevent the use of the terminal by unauthorized users.

Technical specifications for 2711C-K2M

ManufacturerRockwell Automation
BrandAllen-Bradley
Product LineComponent Terminal
SeriesC200
Part Number/Catalog No.2711C-K2M
Display Size2 in.
Display ColorMonochrome
Input TypeKeypad
Power24VDC
Resolution122 x 32 pixels
Power Consumption5 Watts
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 2711C-K2M has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711C-K2M units instead of migration.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 2711C-K2M is a PanelView Component C200 Terminal providing visualization and control for low-end applications that use Ethernet or serial communications. This device can connect to the PowerFlex 4 drives and the preferred range of controllers include the Allen-Bradley MicroLogix and Micro800 families. These include Analog Input Modules 1771-1E and 1771-1F. The panel installation and maintenance can be made easy with the quick-lever clips and mounting clamps. This C200 terminal's easy interface lets you design your own application and simultaneously adjust the terminal settings as well. You can also check history, alarm messages directly through the interface panel of 2711C-K2M.

2711C-K2M has an input voltage of 18 to 30 Volts DC, or 24 Volts DC nominally. Be sure to never connect commons together when using this device. With a power consumption of 5 Watts, it can be programmed easily with a USB device as well. The operator input has a total of 10 functional keys and backlight time of more than 50,000 hours best suited for C200 and C300 terminals. You don't have to download the application first, instead, the results of the design can be seen directly on the terminal itself. The power requirements for this product are the 18 to 30 Volts DC. It supports RS-232 (DH-485), RS-232 (DF1), RS-485 as communication ports which are available from Siemens as well as Modbus through various vendors. Weighing around 0.65 pounds and with a display area of 49 x 14 mm (1.93 x 0.55 in.), it is quite handy and easy to use.