2711P-T10C22D9P
This terminal is operated via a touch screen, which has an actuation rating capable of handling up to 1 million presses with a required operating force of 100 grams. The viewing dimensions are 211 mm
In Stock Ships Today
4.9
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Panelview Plus 7
The Allen Bradley Panelview Plus 7 is an Operator Interface Terminal which has a display size ranging from 4 inches to 10 inches. They use WIndows CE 6.0 and can be programmed with Factory Talk View Machine Edition. These terminals are capable of monitoring an application remotely using a VNC connection. This module includes 512 MB of Ram and uses an SD card to copy and restore the operator interface.
Learn more
Browse Panelview Plus 7
Browse available units in our catalog of Panelview Plus 7.
2711P-T15C22D9P
The display operates with a resolution of 1024 x 768 XGA, providing 18-bit color graphics. It features a user-friendly touch input and a viewing area measuring 304 mm in width and 228 mm in height. Th
In Stock Ships Today
5.0
2711P-T10C21D8S
This terminal includes a wide viewing area of 211 mm x 158 mm with an aspect ratio of 4:3. The touch screen has a robust actuation rating of 1 million presses, indicating durability. System specificat
In Stock Ships Today
4.9
2711P-T12W22D9P
This performance terminal is equipped with a wide-screen display measuring 12.1 inches and operates at a resolution of 1280 x 800 pixels, providing 18-bit color graphics. It includes 512 MB of RAM and
In Stock Ships Today
4.9
2711P-T7C21D8S
As part of the PanelView Plus 7 series, this terminal has a viewing area of 132 x 99 mm with a 4:3 aspect ratio. It ensures adequate brightness at 300 nits and is designed for durability with a touchs
In Stock Ships Today
4.8
2711P-T7C22D9P
This interface terminal utilizes a 6.5-inch touchscreen with a 4:3 aspect ratio. It boasts a viewing area of 132 x 99 mm and is conformally coated for enhanced durability. The touchscreen is rated for
In Stock Ships Today
4.9
2711P-T6C21D8S
This unit employs a touchscreen for user input, which can withstand up to 1 million actuations. The display area measures 115 x 86 mm, boasting a typical brightness of 300 Nits, with an aspect ratio o
In Stock Ships Today
5.0
2711P-T15C21D8S
With a robust memory setup, this terminal includes a RAM capacity of 512 MB along with an equivalent nonvolatile memory capacity of 512 MB. Users can utilize around 80 MB of free memory for custom app
In Stock Ships Today
5.0
2711P-T19C22D9P
This interface terminal utilizes a 19-inch diagonal display with a viewing area of 14.8 x 11.9 inches and maintains a 5:4 aspect ratio. The device is rated to handle 1 million touches and has a minimu
In Stock Ships Today
4.8
2711P-T12W21D8S
This operator interface terminal showcases a 12.1-inch display with a WXGA TFT type, providing a pixel resolution of 1280 x 800. Equipped with a single Ethernet port for connectivity and a DC voltage
In Stock Ships Today
4.7
Showing 1-10 of
151
results
Allen-Bradley PanelView Plus 7
Technical Specifications
- Standard Terminals
- Ethernet: one RJ45 10/100 MB Auto-MDI/MDI-X with IEEE 1588 port or two 10/100Base-T, Auto MDI/MDI-X Ethernet ports supporting linear, star or DLR network topology
- 512MB storage and RAM with 80MB nonvolatile storage for apps
- Input voltage range18-30V DC non-isolated
- Display sizes range from 4-15 inches
- Performance Terminals
- 512MB storage and RAM with 80MB nonvolatile storage for apps
- Star, linear and DLR topologies supported through Ethernet ports
- Input voltage range 18-30V DC
- Display sizes range from 7-19 inches
PanelView Plus 7 Status Indicators
Two status indicators are located on the back of your PanelView Plus 7 terminal. The STS indicator is green and communicates that the terminal is powered on and operating. The ERR indicator is red and communicates hardware and or firmware faults. Upon starting your terminal, both indicators will initially flash, and the STS indicator will continue to flash as startup progresses. If the indicators do not turn on, always check the power cable. Once the startup has completed successfully, the STS indicator remains on. See the table below if the terminal stops during the startup process:
| ERR Indicator (Red) | STS Indicator (Green) | Meaning/Action |
| Possibly Recoverable Error | ||
| Blinking | Off | Firmware error. Redownload firmware. |
| Failed configuration. Restore factory default image. | ||
| Fatal Error | ||
| On | Blinking | Display hardware error. Replace the terminal. |
| On | Hardware error. Replace the terminal. | |
PanelView Plus 7 Startup Errors
Startup Failed
If your PanelView Plus 7 terminal fails to startup, always check for adequate power first. Verify the terminal's DC power requirements are being met. Startup failures can also be caused by incorrect wiring. Review the wire specifications for your terminal and verify that the DC power wiring is correct. Check the status indicators. See the table above. Ensure noting is touching the display during startup, as this may cause startup errors. Finally, ensure the progress indicator has not stalled. If it has stalled, reload the firmware or restore the terminal to factory default settings.
Intermittent Terminal Restarts
If your PanelView Plus 7 terminal is restarting for seemingly no reason, first check for incorrect wiring. Review the wire specifications for your terminal and verify the DC power wiring is correct. Intermittent terminal restarts can also be caused by the processor overheating. Check the processor temperature, the operating temperature, and review the System Event log for over-temperature conditions. Also, verify that there is adequate clearance around the terminal.
PanelView Plus 7 Terminal Component Anomalies
| Issue | Action |
| Temperatures Beyond Operating Range | Check the Monitors tab to review temperatures. Normal operation will not resume until the system has cooled to a normal operating temperature. |
| Low Display Brightness |
Adjust the Brightness Setting - Select Terminal Settings> Display> Display Intensity Use the arrows to change the intensity and press Enter to save |
| Low Screen Saver Brightness |
Adjust the Screen Saver Setting - Select Terminal Settings> Display> Screen Saver Use the arrows to adjust the intensity and press Enter to save |
| Issue | Action |
| Touchscreen Nonfunctional | Verify the touchscreen is not damaged. If it is, the terminal must be replaced |
| Incorrect Calibration | Recalibrate the touchscreen |
| Touching Multiple Input Points | The touchscreen does not support multiple operations simultaneously. Ensure you do not touch multiple input elements at once and that you do not rest your hand on the display. |
| Issue | Action |
| Cable Connections are Poor | Verify network connections and check the status indicators. The green indicator will turn on when a link has been established and the yellow indicator will blink when activity is detected. |
| Invalid Ethernet Connection | Ensure there is a good connection to the hub and uplink ports. Poor cable quality and crimping can inhibit the ethernet connection. |
|
Invalid IP Address |
Check the DHCP. If this is enabled the device will attempt to connect to a valid IP address within seconds of startup. If it fails to acquire and IP address, the TCP/IP protocol will assign 169.254.xxx.xxx. |
| Conflicting IP Addresses | Check the DHCP. If the DHCP is not enabled, verify the IP address specified does not conflict with another device on the network. |
Repair Your PanelView Plus 7
Here at DO Supply, we offer repair services for your Allen-Bradley products, such as the Allen-Bradley PanelView Plus 7. Click here for more information or to request a quote