2711P-RDT10CM
The 2711P-RDT10CM is a PanelView Plus Operator Terminal display module. This display module is Marine certified, compatible for use with the PanelView Plus 1000 and PanelView Plus 6 1000 touch operator terminal. It features a 10.4-inch colored display screen with a viewing area of 132 x 99 millimeters (5.2 x 3.9 inches) and a resolution of 640 x 480 pixels.
-
We sell industrial automation parts backed by our 2-year DO Supply Warranty.
-
Same-day domestic and expedited international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, and more, plus flexible payment plans.
-
Repair and exchange services for all existing automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for 2711P-RDT10CM
| Manufacturer | Rockwell Automation |
|---|---|
| Brand | Allen-Bradley |
| Product Family: | PanelView Plus / PanelView Plus 6 |
| Product Type: | Operator Terminals |
| Product Category: | PanelView Plus 1000 / PanelView Plus 6 1000 |
| Part Number: | 2711P-RDK10C |
| Supported Operator Input: | Keypad |
| Display Type: | Color active-matrix TFT |
| Backlight: | CCFL, 50,000 hours min at 25 ° C (77 °F) |
| Display Size: | 10.4 inches |
| Display Area: | 211 x 158 mm (8.3 x 6.2 in.) |
| Resolution: | 640 x 480 |
| Removal and Insertion Under Power: | Not supported |
| Anti-glare overlay: | 2711P-RDT10CM |
| Conformal coating: | Yes |
The 2711P-RDT10CM is a 1000 module touch display, marine certified and manufactured by Allen Bradley. It is a PanelView Plus product component that functions with the 1000 modules only. The 2711P-RDT10CM as a display module comes with a 10.4-inch screen and a color display. It is available separate from the PanelView plus products available for field installation or replacement; this implies that apart from the display module that comes with the particular PanelView plus model.
To replace a display module, it is important to note that the power supply must be disconnected from the display terminals. Additionally, the logic module should be disconnected from the communication module before the replacement starts. Once the power supply has been removed, the user then proceeds to have the terminal removed from the panel. Check to see if the logic panel is fastened to the communication panel. (In some models, it is not). If it is, there should be about four screws. Loosen these screws and detach the communication panel from the logic panel. Next, separate the logic panel from the display panel by loosening the six screws that join them together. Once this is complete, cautiously lift the logic panel, separate it from the terminal, and lay the display module aside. The bulk of the work is done now, you can just replace with the new 2711P-RDT10CM. While replacing the logic panel over the 2711P-RDT10CM. Ensure that the connectors align and then tighten the six screws to a torque of 0.58 N-m. If needed, the four bolts that hold the communication module can also be screwed to the logic panel. Overall, the 2711P-RDT10CM is an excellent, durable touch display for long-term use.
The Allen-Bradley RDT10CM is a display module that is used with the PanelView Plus operator terminals, specifically, the 1000 Touch versions of PanelView Plus and PanelView Plus 6 product family. Not only does the 2711-RDT10CM provide a wide viewing and working area, it enables the touch input capability of the host terminal as the 2711P-RDT10CM comes with embedded touch cells.
The 2711P-RDT10CM comes with marine certification. With this, the display module is ideally used for PanelView operator terminals that are intended to be installed or currently servicing applications with high-humidity, extreme hot and cold temperatures, as well as installation areas with increased levels of electromagnetic interference. Additionally, this display module contributes to lowered frequency emissions that do not exceed the standard set by the marine industry.
The 2711P-RDT10CM is a Color active matrix, Thin-Film Transistor (TFT) with liquid crystal display (LCD). The screen size is 10.4-inches with a resolution of 640 x 480 pixels and display area of 211 x 158 millimeters (8.3 x 6.2 inches). The touch cells are analog resistive touch screen interface with expected operating lifespan of 1 million actuation at an actuation force of 10-110 g.
The 2711P-RDT10CM is basically a replacement module as newly purchased operator terminals come with a display module by default. Display modules such as the 2711P-RDT10CM are provided with related terminal adjustment such as contrast, brightness, and sensitivity.
| Revision Part # | Also known as | |
|---|---|---|
| 2711P-RDT10CM Ser A | 2711P-RDT10CM/A, Series A, Rev A | Request a quote |
| 2711P-RDT10CMX | 2711P-RDT10CM/X, Series X, Rev X | Request a quote |
| Don't see your particular revision? Contact us now. | ||
- 2711P-RDT1OCM
- 2711P-RDTL0CM
- 2711PRDT10CM
- 2711PRDT1OCM
- 2711PRDTL0CM
- 271LP-RDT10CM
- 271LPRDT10CM
- 27L1P-RDT10CM
- 27L1PRDT10CM
- 27LLP-RDTL0CM
- 27LLP-RDTLOCM
- 27LLPRDTL0CM
- 27LLPRDTLOCM
Can I use the 2711P-RDT10CM in marine certified application areas?
Yes. The 2711P-RDT10CM is marine certified.
Can I use the 2711P-RDT10CM with non-marine certified terminals?
Technically Yes however, it is not cost effective as marine certified components and units costs higher compared to standard terminals.
Does the 2711P-RDT10CM support touch screen input?
Yes. The 2711P-RDT10CM has embedded touch cell for touch input interface.
Display Module 1000 Model with 10.4 in. Color Display and Touchscreen and marine certified.
The 2711P-RDT10CM is a 10.4-inch display module. The main advantage of this operator terminal is that it is Marine certified therefore, it can serve standard or marine certified applications. This component, including the entire host unit is ideally used for applications located in extreme hot and cold temperatures as well as increased level of vibration and electromagnetic presence.