Rated 4.5 with 18 reviews
credit cards accepted
better business bureau

2711P-RN3 Ser A

2711P-RN3/A, Series A, Rev A

Description:  The Allen-Bradley 2711P-RN3 communication module is a Panelview Plus series DH-485 communication module. It is made to be used with Panelview Plus 400 and Panelview Plus 600 series terminals. The 2711P-RN3 DH-485 communication module can support any available DH-485 protocol. It can also be used with a variety of cables. The 2711P-RN3 DH-485 communication module can operate at 0 to 55 degrees Celsius or 32 to 131 degrees Fahrenheit.

Available Now 
Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the 2711P-RN3.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To Speak to a sales representative for pricing & lead time:





About 2711P-RN3/A

The Allen-Bradley 2711P-RN3 Series A Data Highway (DH-485) communication module is a Series A communication module for the PanelView Plus terminals. This module provides a Data Highway (DH-485) network interface to the base-configured module, thereby expanding its network capability through THE DH-485 industrial local area network. The DH-485 network offers network connectivity for every supported device across the factory floor and it has a maximum device connection capacity of up to 32 devices (including the MicroLogix 1000 and SLC 500 controllers). This module is compatible with the PanelView 400 and 600 terminals with both AC and DC input power. The 2711P-RN3 Series A module offers a non-isolated DH-485 port connection over a maximum cable distance of 30 meters (98 feet) and it supports the 1761-NET-AIC and 1761-NET-AIC advanced interface converters (AIC) for applications that require a longer cable length than that.

The 2711P-RN3 Series A module offers a communication and data transmission rate of 9600 to 19,200 bauds. It offers point-to-point communication with single or multiple SLC 500 and MicroLogix 1000 controllers. The 2711P-RN3 Series A communication module does not come with a base-configured unit and so it must be ordered separately. It supports easy field installation. To install the 2711P-RN3 Series A module, disconnect the power from the terminal and remove the label covering the communication connector on the terminal’s base unit. Place the 2711P-RN3 Series A module on the base unit and make sure the module’s connector aligns perfectly with the base unit connector. Tighten the 2711P-RN3 Series A communication module with 3 factory-supplied captive screws with 3 to 4 pounds on an inch of torque to hold the module firmly in place.

Technical specifications:
Manufacturer:Rockwell Automation
Part Number/Catalog No.:2711P-RN3
Product Line:Panelview Plus
Communication Cable:1747-AIC
Shipping Weight:2 lbs.
Shipping Dimensions:8X8X5 in.