Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Servo Controllers 1394-SJT05-T

1394-SJT05-T

|

The Allen-Bradley 1394-SJT05-T is a GMC Turbo system module that support Four (4) axis modules and Four (4) channels of auxiliary input channel. The module’s input voltage of 380 / 460 Volts AC, 3-Phase, input frequency of 50/60 Hz and current of 6.5 amperes. It has electrical output voltage of 530/680V DC, continuous power output of 4/5 kilowatts with peak power of 28 kW. The continuous current output is 7.36 A and peak current of 15.0 amperes.

Ships Tomorrow.
In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more
  • We sell industrial automation parts backed by our 2-year DO Supply Warranty.

  • Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.

  • AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.

  • Repairs and exchanges are available for all automation products.

  • Reseller Options

    Drop shipping, blind shipping, and account shipping with no extra fees.

Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for 1394-SJT05-T

BrandAllen-Bradley
Part Number/Catalog No.1394-SJT05-T
Product LineServo Controller
Module TypeSystem
Power Rating5 Kilowatt
Input Phase3 Phase
GMC OptionsAxisLink and Remote I/O
Factory-Installed OptionsWith IMC S Class Turbo integrated motion controller
Input Voltage360-480AC Volts
Efficiency99%
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1394-SJT05-T is a GMC Turbo module that features a 32-Bit microprocessor and 64K memory. This module has integrated high speed link and direct communication to Allen-Bradley Programmable Logic Controllers (PLC). This module supports up to

The supported PLC platform of this axis module are SLC 5/03, 5/04 or 5/05 processors. Programming is simplified as this system module is microprocessor based. To connect to an SLC controller, the required cables are 1746-C7 or 1746-C9. The 1746-C7 measures 152.44 mm or 6 inches while 1746-C9 measures 914.4 mm or 36 inches. These cables are also used as SLC rack interconnect modules.

When mounting this system modules, appropriate clearances must be observed for proper air flow and ventilation. The Top clearance must have a free space of 50.8 mm or 2.0 inches clearance, Side clearance of 10.0 mm or 0.4 inch, and 25.4 mm or 1-inch clearance for the cover tab to allow opening and closing. The cover tab comes along with the system module. The terminator must also be considered and provided a clearance of 76.2 mm or 3.00 inches. If the 1394-SJT05-T system module will be used to interface with an SLC controller, an additional depth of 101.6 mm or 4 inches to the left side of the module must be provided to allow insertion of 1746-C7 or 1746-C9 cable. This GMC Turbo system module must not be installed horizontally. Only vertical installation is allowed due to natural air flow and orientation communication ports, module labels, power and grounding terminals and diagnostic LED indicators. The 1394-SJT05-T servo controller is a system module with a 5kW power rating that has a unique Graphic Motion Control (GMC) language and an application memory which provides faster program execution. The 1394-SJT05-T also has a 64-KB memory and a 32-bit processor. The system module is a 324 to 528 Volts AC electronic device, which also has an AC input current of 6.5 Amps. The output voltage is between 530 to 680 Volts DC and the 1394-SJT05-T peaks at 975 Amps. It can maintain a continuous output power range of 4 - 5kW. The 1394-SJT05-T is also equipped with an external shunt kit with a power rating of 1400W which can peak at 40,000W. It has an efficiency of 99%. The 1394-SJT05-T system module operates effectively with an output current of 7.36 Amps. It has a unique inductance of 1000 microH, plus a capacitance rating of 220 microF. The 1394-SJT05-T dissipates power at66W at 20%, 70W at 40%, 73W at 60%, 77W at 80%, and 80W at 100% phases of percentage output power. With an ambient temperature of 32 to 122 degrees Fahrenheit and a 5% to 95%, non-condensing relative humidity range, the 1394-SJT05-T will operate at a shock rating of 15G, and at a vibration of up to 1G. On standby, the module’s shock rating is 30G, and a vibration of up to 2.5G. This module weighs 24.25 pounds.

Revision Part #Also known as
1394-SJT05-T Ser A1394-SJT05-T/A, Series A, Rev A
Request a quote
1394-SJT05-TX1394-SJT05-T/X, Series X, Rev X
Request a quote
Don't see your particular revision? Contact us now.