|Warranty:||1 year DO Supply Warranty Included|
|Shipping:||Worldwide shipping via DHL, UPS, Fedex, and TNT|
|Repairs:||We offer repair service for the 1394-SJT10-A.|
|Exchange:||Exchange credit for your defective unit available.|
The Allen-Bradley 1394-SJT10-A Servo controller system is a member of the (1394x-SJTxx-A) series that is equipped with a digital servo drive and a conventional ±10V DC interface that is analog. The 1394-SJT10-A Servo controller system can either serve as a velocity controller or a torque system. The 1394-SJT10-A Servo controller system can be incorporated with a universal Bulletin 1201 HMI (Human Interface Module) and can, therefore, allow auto-tuning and a Start-up reminder. The 1394-SJT10-A is fully equipped with an AC input voltage of 324 – 528 volts (50-60 HZ 3-phase) and an input current of 13A (AC). The 1394-SJT10-A Servo controller system supports a peak inrush current of 1300A alongside a nominal bus output voltage of 530-680V DC. The 1394-SJT10-A has a line loss ride of 20 ms, and can power-out continuously with 8-10kW of power. The 1394-SJT10-A output power peaks at 28kW, and operates at 99% efficiency.
The 1394-SJT10-A Servo controller system is built to operate at an output current of 14.73A, with an output current of 29.46A (intermittent). This device has an inductance of 750 µH, and a capacitance of 330 µF. The 1394-SJT10-A Servo controller system dissipates a power of 70W, 77W, 84W, 81W, and 98W, at (20%), (40%), (60%), (80%), and (100%) percentage of the power output. The 1394-SJT10-A Servo controller system works efficiently at an ambient temperature range of 0-50 °C (32-122° F) and a relative humidity range of 5-95%, non-condensing. It has a shock rate of 15G and vibrates to a maximum of 1G. The 1394-SJT10-A Servo controller system has a product weight of 11 kg.