1394-SJT10-E | Allen Bradley Servo Controllers

×

1394-SJT10-E

Rated 4.6 with 5 reviews
About | Product Specifications

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1394-SJT10-E

Description: The Allen-Bradley Servo Controller 1394-SJT10-E is a System with 50-60 Hertz, a 10 Kilowatt Power Rating, and 360-480AC Volts Input Voltage.
Available Now
Request a quote for 1394-SJT10-E

Description: The Allen-Bradley Servo Controller 1394-SJT10-E is a System with 50-60 Hertz, a 10 Kilowatt Power Rating, and 360-480AC Volts Input Voltage.
About | Products Specs

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1394-SJT10-E.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 5 reviews

    Technical Specifications for 1394-SJT10-E

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394-SJT10-E
Product LineServo Controller
Module TypeSystem
Power Rating10 Kilowatt
Input Phase3 Phase
Input Voltage50-60 Hertz
GMC OptionsAxisLink and Remote I/O
Input Voltage360-480AC Volts
Efficiency98%
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394-SJT10-E
Product LineServo Controller
Module TypeSystem
Power Rating10 Kilowatt
Input Phase3 Phase
Input Voltage50-60 Hertz
GMC OptionsAxisLink and Remote I/O
Input Voltage360-480AC Volts
Efficiency98%
s

About 1394-SJT10-E

The 1394-SJT10-E servo controller is a CNC Interface system in the 1394 series. The 1394-SJT10-E controller by Allen-Bradley supplies a digital servo system that can be utilized with the 9/260 and the 9/290 CNC. The 1394-SJT10-E employs a digital interface which saves cost and time. The 1394-SJT10-E controller is fully equipped with an I/O fiber-optic ring that is fully interfaced and can be programmed with the CNC operator panel. The 1394-SJT10-E operates with an AC-rated input voltage of 324 to 528 Volts (three-phase, 50 to 60 Hertz), plus an input current of 13 Amps. The 1394-SJT10-E CNC interface system has a peak current of 1300 Amps, and a nominal output voltage of 530 to 680 Volts DC. The 1394-SJT10-E has a continuous power output of 8 to 10 kilowatts and an output power that can peak at 28 kilowatts. It can also operate with an efficiency of 99%. The continuous output current for the 1394-SJT10-E CNC interface system is 14.73 Amps and it can operate intermittently at 29.46 Amps.



The 1394-SJT10-E’s enclosure temperature spans between 0 and 50 degrees Celsius (32 and 122 degrees Fahrenheit), and the operational relative humidity revolves around 5% to 95%, non-condensing. The 1394-SJT10-E’s maximum operational shock rating can stand up to 15G, and it can also withstand a vibration of 1G. On standby, the 1394-SJT10-E will have a vibration of 2.5G and a shock rating 30G. The 1394-SJT10-E servo controller also comes with an inductance of 750 µH, and a system capacitance 330 µF. The 1394-SJT10-E has a percentage output power by dissipation power at 70 watts (20%), 77 watts (40%), 81 watts (60%), 84 watts (80%), and 98 watts (100%), and it weighs a total of 11 kilograms (24.25 pounds).



Repair Services for 1394-SJT10-E

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1394-SJT10-E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1394-SJT10-E

Please refer to the manual for more information about the 1394-SJT10-E such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1394-SJT10-E Ser A
1394-SJT10-E/A, Series A, Rev A Request Quote
1394-SJT10-EX
1394-SJT10-E/X, Series X, Rev X Request Quote
Common misspellings:
  • l394-SJT10-E
  • 139A-SJT10-E
  • 1394-SJTl0-E
  • 1394-SJT1o-E
  • 1394SJT10E

Dimensions For 1394-SJT10-E

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1394-SJT10-E

Resolutions For 1394-SJT10-E

About

Technical Specifications for 1394-SJT10-E

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394-SJT10-E
Product LineServo Controller
Module TypeSystem
Power Rating10 Kilowatt
Input Phase3 Phase
Input Voltage50-60 Hertz
GMC OptionsAxisLink and Remote I/O
Input Voltage360-480AC Volts
Efficiency98%
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394-SJT10-E
Product LineServo Controller
Module TypeSystem
Power Rating10 Kilowatt
Input Phase3 Phase
Input Voltage50-60 Hertz
GMC OptionsAxisLink and Remote I/O
Input Voltage360-480AC Volts
Efficiency98%

About 1394-SJT10-E

The 1394-SJT10-E servo controller is a CNC Interface system in the 1394 series. The 1394-SJT10-E controller by Allen-Bradley supplies a digital servo system that can be utilized with the 9/260 and the 9/290 CNC. The 1394-SJT10-E employs a digital interface which saves cost and time. The 1394-SJT10-E controller is fully equipped with an I/O fiber-optic ring that is fully interfaced and can be programmed with the CNC operator panel. The 1394-SJT10-E operates with an AC-rated input voltage of 324 to 528 Volts (three-phase, 50 to 60 Hertz), plus an input current of 13 Amps. The 1394-SJT10-E CNC interface system has a peak current of 1300 Amps, and a nominal output voltage of 530 to 680 Volts DC. The 1394-SJT10-E has a continuous power output of 8 to 10 kilowatts and an output power that can peak at 28 kilowatts. It can also operate with an efficiency of 99%. The continuous output current for the 1394-SJT10-E CNC interface system is 14.73 Amps and it can operate intermittently at 29.46 Amps.



The 1394-SJT10-E’s enclosure temperature spans between 0 and 50 degrees Celsius (32 and 122 degrees Fahrenheit), and the operational relative humidity revolves around 5% to 95%, non-condensing. The 1394-SJT10-E’s maximum operational shock rating can stand up to 15G, and it can also withstand a vibration of 1G. On standby, the 1394-SJT10-E will have a vibration of 2.5G and a shock rating 30G. The 1394-SJT10-E servo controller also comes with an inductance of 750 µH, and a system capacitance 330 µF. The 1394-SJT10-E has a percentage output power by dissipation power at 70 watts (20%), 77 watts (40%), 81 watts (60%), 84 watts (80%), and 98 watts (100%), and it weighs a total of 11 kilograms (24.25 pounds).



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1394-SJT10-E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1394-SJT10-E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1394-SJT10-E such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1394-SJT10-E Ser A
1394-SJT10-E/A, Series A, Rev A Request Quote
1394-SJT10-EX
1394-SJT10-E/X, Series X, Rev X Request Quote

Common misspellings:
  • l394-SJT10-E
  • 139A-SJT10-E
  • 1394-SJTl0-E
  • 1394-SJT1o-E
  • 1394SJT10E
PDF
1394-SJT10-E PDF