The 1394-SJT10-T-RL is 1394 GMC Turbo System Module that features faster program execution and simplified communication with SLC 500 controllers through the 32-bit processer and 64K program memory.

1394 devices are electronic based components which has an increased sensitivity with electrostatic discharges, noise and other interferences. The entire 1394 system, including this system module recommended for mounting in a dry clean and dry environment. This means that the component enclosure must prevent entry of foreign objects including dust and dirt as well as water splash or jets, be it horizontal or vertical splash and jets. Appropriate minimum enclosure rating that may meet the installation requirement is an IP 55 enclosure.

Enclosures shall have a controlled climate as the module dissipate heat, depending on the output level it provides. The ambient air temperature shall be between 0 Deg. Celsius and 50 Deg. Celsius. If the enclosure is designed to use ventilated air, appropriate filtering must be applied to prevent entry of contaminant. This also prevents defeating the IP55 enclosure rating purpose. If used near a corrosive environment, outside air shall not enter the panel. In this situation, a positive air pressure inside the panel may be applied to prevent entry of such air. Depending also on the outside temperature, an appropriate climate control package may be installed such as a combination of heater and cooler. Also consider evacuation of air inside the panel.

This system module has 16 Discrete inputs, Four (4) for every axis with dedicated discrete input functions such as Homing, positive and negative overtravel, position registration and negative thermal fault.

The 1394-SJT10-T-RL (GMC Turbo) system module is an electronic device which regulates the momentum of a 3-phase rated motor induction. The 1394-SJT10-T-RL is provides more GML (Graphics Motion Control Language) application program memory that allows rapid execution of programs. Another advantage that the 1394-SJT10-T-RL has over every other series is that it offers a 32-bit processor and 64KB of memory. The 1394-SJT10-T-RL system module is powered by an AC-rated input voltage with nominal range of 324 to 528 Volts, and a 13 Volts AC input current. The inrush current of the 1394-SJT10-T-RL peaks at 1300 Amps and its output voltage is around 530 to 680 Volts DC. Its line loss rides around 20 milliseconds with a continuous output power range of 8 to 10 kW. The 1394-SJT10-T-RL controller has an output power that peaks at around 28 kW. This system module operates with 99% efficiency. The 1394-SJT10-T-RL can operate at a continuous output current of 14.73 Amps, and peak output current of 29.46 Amps. The component’s inductance is 750 microH, and a 330 microF capacitance. It has a power dissipation at the following levels, 70 W (20%), 77 W (40%), 81 W (60), 84 W (80), and 98 W (100%), of percentage power output respectively. The 1394-SJT10-T-RL functions efficiently in an ambient temperature of around 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit), with a relative humidity of 5 to 95%, non-condensing. It can operate at a maximum shock rating of up to 15G and it vibrates at a maximum of 1G. The 1394-SJT10-T-RL system has a shock rating of 30G (maximum) and can vibrate at a maximum 2.5G in a standby mode. The 1394-SJT10-T-RL has a net weight of 11 kilograms (24.25 pounds).