1394C-AM03 - In Stock | Allen Bradley Servo Controllers

1394C-AM03

Rated 4 with 32 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1394C-AM03

Description: The Allen-Bradley Servo Controller 1394C-AM03 is a Servo (Axis) Amplifier with Filtering (EMI) and Enhanced Terminations, a 2 Kilowatt Output Rating, 530-680 DC Input Voltage, and a 3.2 A Amperage.
In Stock Ships Today
Request a quote for 1394C-AM03

Description: The Allen-Bradley Servo Controller 1394C-AM03 is a Servo (Axis) Amplifier with Filtering (EMI) and Enhanced Terminations, a 2 Kilowatt Output Rating, 530-680 DC Input Voltage, and a 3.2 A Amperage.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1394C-AM03.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4 with 32 reviews

    Technical Specifications for 1394C-AM03

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-AM03
Product LineServo Controller
Module TypeServo (Axis) Amplifier
Output Rating2 Kilowatt
DC Input Voltage530-680
Amperage3.2 A
Series EnhancementsFiltering (EMI) and Enhanced Terminations
AC Input Voltage360-480
Efficiency98%
Capacitance110 Microfarads
Speed Regulation0-0.05% of base speed w/ 100% torque disturbance
Static Gain1.28 rms A/mV
Continuous Current (rms)3.0 Amperes
Peak Current (rms - 1 sec)6.0 Amperes
Continuous Power 380/460 Volts1.6/2 Kilowatts
Peak Power 380/460 Volts3.2/4 Kilowatts
Weight11.02 lbs (5 kg)
Dimensions13.8 x 11.0 x 1.97 in (350 x 280 x 50 mm)
UPC662453682242
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-AM03
Product LineServo Controller
Module TypeServo (Axis) Amplifier
Output Rating2 Kilowatt
DC Input Voltage530-680
Amperage3.2 A
Series EnhancementsFiltering (EMI) and Enhanced Terminations
AC Input Voltage360-480
Efficiency98%
Capacitance110 Microfarads
Speed Regulation0-0.05% of base speed w/ 100% torque disturbance
Static Gain1.28 rms A/mV
Continuous Current (rms)3.0 Amperes
Peak Current (rms - 1 sec)6.0 Amperes
Continuous Power 380/460 Volts1.6/2 Kilowatts
Peak Power 380/460 Volts3.2/4 Kilowatts
Weight11.02 lbs (5 kg)
Dimensions13.8 x 11.0 x 1.97 in (350 x 280 x 50 mm)
UPC662453682242
s

About 1394C-AM03

The Allen-Bradley 1394C-AM03 is a three-phase multi-axis module. It has a 2 kW power rating and a nominal input voltage of 530 to 680 Volts DC. With a controller, the static gain of this module is 1.28 RMS A/V. The continuous current of the 1394C-AM03 is 3 Amps, the continuous current power output at 360 to 460 Volts nominal is 1.62/2 kW the percentage of peak current limit adjust is 200%. The 1394C-AM03’s capacitance is 110 microfarad.



The 1394C-AM03 is UL listed and CUL certified. It has control features such as digitally-adjusted velocity, current loop compensation, and digital fault and diagnostic utilities. The digitally-adjusted velocity and the current loop compensation accommodate system inertia. The digital fault and diagnostic utilities monitor every aspect of this device. The 1394C-AM03 also includes a current monitor, thermal overload detection, and a feedback signal monitor and advanced protective features like overload tolerant operation and soft current limiting. It is possible to integrate this axis module to a system quickly with slide-and-lock connectors which eliminate bus bars and wiring harnesses. This 1394C-AM03 has advanced communications and I/O capabilities for integrating with standard plant floor networks.



Repair Services for 1394C-AM03

Type Lead Time Price Action
Repair Service 2-4 weeks $271cartAdd to Cart

Our highly skilled technicians can repair your 1394C-AM03. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1394C-AM03

Please refer to the manual for more information about the 1394C-AM03 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1394C-AM03/A, Series A, Rev A Request Quote
1394C-AM03/B, Series B, Rev B Request Quote
1394C-AM03/C, Series C, Rev C Request Quote
1394C-AM03X
1394C-AM03/X, Series X, Rev X Request Quote
Common misspellings:
  • l394C-AM03
  • 139AC-AM03
  • 1394C-AMo3
  • 1394CAM03

Dimensions For 1394C-AM03

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1394C-AM03

Resolutions For 1394C-AM03

About

Technical Specifications for 1394C-AM03

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-AM03
Product LineServo Controller
Module TypeServo (Axis) Amplifier
Output Rating2 Kilowatt
DC Input Voltage530-680
Amperage3.2 A
Series EnhancementsFiltering (EMI) and Enhanced Terminations
AC Input Voltage360-480
Efficiency98%
Capacitance110 Microfarads
Speed Regulation0-0.05% of base speed w/ 100% torque disturbance
Static Gain1.28 rms A/mV
Continuous Current (rms)3.0 Amperes
Peak Current (rms - 1 sec)6.0 Amperes
Continuous Power 380/460 Volts1.6/2 Kilowatts
Peak Power 380/460 Volts3.2/4 Kilowatts
Weight11.02 lbs (5 kg)
Dimensions13.8 x 11.0 x 1.97 in (350 x 280 x 50 mm)
UPC662453682242
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-AM03
Product LineServo Controller
Module TypeServo (Axis) Amplifier
Output Rating2 Kilowatt
DC Input Voltage530-680
Amperage3.2 A
Series EnhancementsFiltering (EMI) and Enhanced Terminations
AC Input Voltage360-480
Efficiency98%
Capacitance110 Microfarads
Speed Regulation0-0.05% of base speed w/ 100% torque disturbance
Static Gain1.28 rms A/mV
Continuous Current (rms)3.0 Amperes
Peak Current (rms - 1 sec)6.0 Amperes
Continuous Power 380/460 Volts1.6/2 Kilowatts
Peak Power 380/460 Volts3.2/4 Kilowatts
Weight11.02 lbs (5 kg)
Dimensions13.8 x 11.0 x 1.97 in (350 x 280 x 50 mm)
UPC662453682242

About 1394C-AM03

The Allen-Bradley 1394C-AM03 is a three-phase multi-axis module. It has a 2 kW power rating and a nominal input voltage of 530 to 680 Volts DC. With a controller, the static gain of this module is 1.28 RMS A/V. The continuous current of the 1394C-AM03 is 3 Amps, the continuous current power output at 360 to 460 Volts nominal is 1.62/2 kW the percentage of peak current limit adjust is 200%. The 1394C-AM03’s capacitance is 110 microfarad.



The 1394C-AM03 is UL listed and CUL certified. It has control features such as digitally-adjusted velocity, current loop compensation, and digital fault and diagnostic utilities. The digitally-adjusted velocity and the current loop compensation accommodate system inertia. The digital fault and diagnostic utilities monitor every aspect of this device. The 1394C-AM03 also includes a current monitor, thermal overload detection, and a feedback signal monitor and advanced protective features like overload tolerant operation and soft current limiting. It is possible to integrate this axis module to a system quickly with slide-and-lock connectors which eliminate bus bars and wiring harnesses. This 1394C-AM03 has advanced communications and I/O capabilities for integrating with standard plant floor networks.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $271cartAdd to Cart

Our highly skilled technicians can repair your 1394C-AM03. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $271cartAdd to Cart

Our highly skilled technicians can repair your 1394C-AM03. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1394C-AM03 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1394C-AM03/A, Series A, Rev A Request Quote
1394C-AM03/B, Series B, Rev B Request Quote
1394C-AM03/C, Series C, Rev C Request Quote
1394C-AM03X
1394C-AM03/X, Series X, Rev X Request Quote

Common misspellings:
  • l394C-AM03
  • 139AC-AM03
  • 1394C-AMo3
  • 1394CAM03
PDF