1394C-AM04 - In Stock | Allen Bradley Servo Controllers

1394C-AM04

Rated 4.9 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1394C-AM04

Description: The 1394C-AM04 module is a 1394 axis module from the 1394 Servo Controllers series by Allen-Bradley/Rockwell Automation. Its continuous current rating is 4.5 Amps and its peak current rating is 9 Amps. The 1394C-AM04 axis module also supports an output power rating of 3 kilowatts. This module can easily connect to a 1394 system module with its slide and lock mechanism. The 1394C-AM04 axis module is made to be 98% efficient in operation.
In Stock Ships Today
Request a quote for 1394C-AM04

Description: The 1394C-AM04 module is a 1394 axis module from the 1394 Servo Controllers series by Allen-Bradley/Rockwell Automation. Its continuous current rating is 4.5 Amps and its peak current rating is 9 Amps. The 1394C-AM04 axis module also supports an output power rating of 3 kilowatts. This module can easily connect to a 1394 system module with its slide and lock mechanism. The 1394C-AM04 axis module is made to be 98% efficient in operation.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1394C-AM04.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 13 reviews

    Technical Specifications for 1394C-AM04

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-AM04
Product LineServo Controller
Module TypeServo (Axis) Amplifier
Output Rating3 Kilowatt
DC Input Voltage530-680
Amperage4.5-9 A
Series EnhancementsFiltering (EMI) and Enhanced Terminations
AC Input Voltage360-480
Efficiency98%
Capacitance110 Microfarads
Speed Regulation0-0.05% of base speed w/ 100% torque disturbance
Static Gain2.6 rms A/mV
Continuous Current (rms)4.5 Amperes
Peak Current (rms - 1 sec)9.0 Amperes
Continuous Power 380/460 Volts2.4/3 Kilowatts
Peak Power 380/460 Volts4.8/6 Kilowatts
Weight11.02 lbs (5 kg)
Dimensions13.8 x 11.0 x 1.97 in (350 x 280 x 50 mm)
UPC662453682259
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-AM04
Product LineServo Controller
Module TypeServo (Axis) Amplifier
Output Rating3 Kilowatt
DC Input Voltage530-680
Amperage4.5-9 A
Series EnhancementsFiltering (EMI) and Enhanced Terminations
AC Input Voltage360-480
Efficiency98%
Capacitance110 Microfarads
Speed Regulation0-0.05% of base speed w/ 100% torque disturbance
Static Gain2.6 rms A/mV
Continuous Current (rms)4.5 Amperes
Peak Current (rms - 1 sec)9.0 Amperes
Continuous Power 380/460 Volts2.4/3 Kilowatts
Peak Power 380/460 Volts4.8/6 Kilowatts
Weight11.02 lbs (5 kg)
Dimensions13.8 x 11.0 x 1.97 in (350 x 280 x 50 mm)
UPC662453682259
s

About 1394C-AM04

The Allen-Bradley 1394C-AM04 is a multi-axis module which belongs to series C in the 1394 family. Its specifications are like those of other multi-axis modules and its peak power is 3 kW. The continuous output current (RMS) of this module is 4.5 Amps, but within a second, the peak current can reach 9 Amps. The 1394C-AM04’s nominal input voltage is 530 to 680 Volts DC and its capacitance is the same as the 1394C-AM03 at a rate of 110 microFarad. It weighs 5 kilograms and there is a heatsink inside its cabinet.



The 1394C-AM04 has a slide-and-lock feature that makes it easy to modify the wiring. Use caution when connecting and routing power or signal wiring on a system. Radiated noise from nearby electronic drives can interfere with feedback, communications, or other sensitive low-voltage signals. This prevents the 1394C-AM04 from operating successfully. Use shielding on the cables to minimize radiated noise, and do not forget to connect all shields to a single ground point. Refer to the manual for further information. Be sure to insulate the open-ended shields (resolver feedback cable at the resolver and velocity command cable at the servo drive) to avoid ground loops.



Technical Description of 1394C-AM04

The Allen-Bradley Servo Controller 1394C-AM04 is a Servo (Axis) Amplifier with Filtering (EMI) and Enhanced Terminations, a 3 Kilowatt Output Rating, 530-680 DC Input Voltage, and a 4.5-9 A Amperage.

Repair Services for 1394C-AM04

Type Lead Time Price Action
Repair Service 2-4 weeks $433cartAdd to Cart

Our highly skilled technicians can repair your 1394C-AM04. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1394C-AM04

Please refer to the manual for more information about the 1394C-AM04 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1394C-AM04/A, Series A, Rev A Request Quote
1394C-AM04/B, Series B, Rev B Request Quote
1394C-AM04/C, Series C, Rev C Request Quote
1394C-AM04X
1394C-AM04/X, Series X, Rev X Request Quote
Common misspellings:
  • l394C-AM04
  • 139AC-AM04
  • 1394C-AMo4
  • 1394C-AM0A
  • 1394CAM04

Dimensions For 1394C-AM04

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1394C-AM04

Resolutions For 1394C-AM04

About

Technical Specifications for 1394C-AM04

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-AM04
Product LineServo Controller
Module TypeServo (Axis) Amplifier
Output Rating3 Kilowatt
DC Input Voltage530-680
Amperage4.5-9 A
Series EnhancementsFiltering (EMI) and Enhanced Terminations
AC Input Voltage360-480
Efficiency98%
Capacitance110 Microfarads
Speed Regulation0-0.05% of base speed w/ 100% torque disturbance
Static Gain2.6 rms A/mV
Continuous Current (rms)4.5 Amperes
Peak Current (rms - 1 sec)9.0 Amperes
Continuous Power 380/460 Volts2.4/3 Kilowatts
Peak Power 380/460 Volts4.8/6 Kilowatts
Weight11.02 lbs (5 kg)
Dimensions13.8 x 11.0 x 1.97 in (350 x 280 x 50 mm)
UPC662453682259
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-AM04
Product LineServo Controller
Module TypeServo (Axis) Amplifier
Output Rating3 Kilowatt
DC Input Voltage530-680
Amperage4.5-9 A
Series EnhancementsFiltering (EMI) and Enhanced Terminations
AC Input Voltage360-480
Efficiency98%
Capacitance110 Microfarads
Speed Regulation0-0.05% of base speed w/ 100% torque disturbance
Static Gain2.6 rms A/mV
Continuous Current (rms)4.5 Amperes
Peak Current (rms - 1 sec)9.0 Amperes
Continuous Power 380/460 Volts2.4/3 Kilowatts
Peak Power 380/460 Volts4.8/6 Kilowatts
Weight11.02 lbs (5 kg)
Dimensions13.8 x 11.0 x 1.97 in (350 x 280 x 50 mm)
UPC662453682259

About 1394C-AM04

The Allen-Bradley 1394C-AM04 is a multi-axis module which belongs to series C in the 1394 family. Its specifications are like those of other multi-axis modules and its peak power is 3 kW. The continuous output current (RMS) of this module is 4.5 Amps, but within a second, the peak current can reach 9 Amps. The 1394C-AM04’s nominal input voltage is 530 to 680 Volts DC and its capacitance is the same as the 1394C-AM03 at a rate of 110 microFarad. It weighs 5 kilograms and there is a heatsink inside its cabinet.



The 1394C-AM04 has a slide-and-lock feature that makes it easy to modify the wiring. Use caution when connecting and routing power or signal wiring on a system. Radiated noise from nearby electronic drives can interfere with feedback, communications, or other sensitive low-voltage signals. This prevents the 1394C-AM04 from operating successfully. Use shielding on the cables to minimize radiated noise, and do not forget to connect all shields to a single ground point. Refer to the manual for further information. Be sure to insulate the open-ended shields (resolver feedback cable at the resolver and velocity command cable at the servo drive) to avoid ground loops.



Technical Description of 1394C-AM04

The Allen-Bradley Servo Controller 1394C-AM04 is a Servo (Axis) Amplifier with Filtering (EMI) and Enhanced Terminations, a 3 Kilowatt Output Rating, 530-680 DC Input Voltage, and a 4.5-9 A Amperage.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $433cartAdd to Cart

Our highly skilled technicians can repair your 1394C-AM04. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $433cartAdd to Cart

Our highly skilled technicians can repair your 1394C-AM04. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1394C-AM04 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1394C-AM04/A, Series A, Rev A Request Quote
1394C-AM04/B, Series B, Rev B Request Quote
1394C-AM04/C, Series C, Rev C Request Quote
1394C-AM04X
1394C-AM04/X, Series X, Rev X Request Quote

Common misspellings:
  • l394C-AM04
  • 139AC-AM04
  • 1394C-AMo4
  • 1394C-AM0A
  • 1394CAM04
PDF