1394C-SJT05-L-RL | Allen Bradley Servo Controllers

×

1394C-SJT05-L-RL

Rated 4.7 with 11 reviews
About | Product Specifications

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1394C-SJT05-L-RL

Description: The 1394C-SJT05-L-RL module is a Bulletin 1394 servo module which is designed and manufactured by Allen-Bradley/Rockwell Automation. It is an S Class module which is CE-certified. The 1394C-SJT05-L-RL servo module needs copper wire that is rated for an ambient temperature of 75 degrees Celsius for the wiring on its power terminal block. Its 3-phase AC input voltage range is from 380 to 460 Volts AC at 50 to 60 Hertz of frequency.
Available Now
Request a quote for 1394C-SJT05-L-RL

Description: The 1394C-SJT05-L-RL module is a Bulletin 1394 servo module which is designed and manufactured by Allen-Bradley/Rockwell Automation. It is an S Class module which is CE-certified. The 1394C-SJT05-L-RL servo module needs copper wire that is rated for an ambient temperature of 75 degrees Celsius for the wiring on its power terminal block. Its 3-phase AC input voltage range is from 380 to 460 Volts AC at 50 to 60 Hertz of frequency.
About | Products Specs

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1394C-SJT05-L-RL.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 11 reviews

    Technical Specifications for 1394C-SJT05-L-RL

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-SJT05-L-RL
Product LineServo Controller
Module TypeSystem
Power Rating5 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC- IMC S Class
GMC OptionsAxisLink and Remote I/O
Input Voltage360-480AC Volts
Nominal Bus Output Voltage 380/460 Volts530/680 Volts DC
Continuous Power Output 380/460 Volts4/5 Kilowatts
Peak Power Output28 Kilowatts
Efficiency99%
Continuous Current Output7.36 Amperes
Peak Current Output15.0 Amperes
Line Loss Ride Through20 ms
Rated AC Input Voltage324-528 Volts AC, 50-60 Hertz, 3 Phase
AC Input Current6.5 Amperes
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-SJT05-L-RL
Product LineServo Controller
Module TypeSystem
Power Rating5 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC- IMC S Class
GMC OptionsAxisLink and Remote I/O
Input Voltage360-480AC Volts
Nominal Bus Output Voltage 380/460 Volts530/680 Volts DC
Continuous Power Output 380/460 Volts4/5 Kilowatts
Peak Power Output28 Kilowatts
Efficiency99%
Continuous Current Output7.36 Amperes
Peak Current Output15.0 Amperes
Line Loss Ride Through20 ms
Rated AC Input Voltage324-528 Volts AC, 50-60 Hertz, 3 Phase
AC Input Current6.5 Amperes
s

About 1394C-SJT05-L-RL

The 1394C-SJT05-L-RL is a member of the 1394 Allen-Bradley Servo Controller Series. It has IMC S Class integrated motion controller backing one axis and two auxiliary encoder inputs that save panel space. Moreover, the 1394C-SJT05-L-RL can run on 360 to 480 Volts DC of three-phase input power with a slide-and-lock feature, efficient IGBT power conversion, module-to-module connections, and GMC (1.5 axes) module functionality.



When two axes are synchronized with it, they are executed simultaneously. The 1394C-SJT05-L-RL has series enhancements such as terminations, EMI filtering, and smart power. It functions between 50 and 60 Hertz and it has a nominal bus output voltage of 530 to 680 Volts DC for sudden power supply fluctuation. It gives a continuous power output of 4 Kilowatts when connected to a 380-Volt source and one of 5 Kilowatts when connected to a 460-Volt source. It has a peak power output of 28 Kilowatts, an efficiency of 99%, a continuous current output of 7.36 Amps, and a line loss ride through of 20 milliseconds. The 1394C-SJT05-L-RL also has an internal shunt resistor with a 200W continuous rating and a peak rating of 40,000W. In line with this, the 1394C-SJT05-L-RL has advanced safety features such as soft current limiting, overload-tolerant operation, and IGBT technology for effectively discreet operation. It also has a protection system from phase loss, ground fault contact, and transient voltage. Thus, the controller consists of two configurable analog test outputs that can be related to critical system parameters for troubleshooting and diagnostics.

Technical Description of 1394C-SJT05-L-RL

The Allen-Bradley Servo Controller 1394C-SJT05-L-RL is a System with Terminations, Filtering (EMI), and Smart Power Series Enhancements, GMC- IMC S Class, a 5 Kilowatt Power Rating, and a 360-480AC Volts Input Voltage.

Repair Services for 1394C-SJT05-L-RL

Type Lead Time Price Action
Repair Service 2-4 weeks $2176cartAdd to Cart

Our highly skilled technicians can repair your 1394C-SJT05-L-RL. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1394C-SJT05-L-RL

Please refer to the manual for more information about the 1394C-SJT05-L-RL such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1394C-SJT05-L-RL Ser A
1394C-SJT05-L-RL/A, Series A, Rev A Request Quote
1394C-SJT05-L-RL Ser B
1394C-SJT05-L-RL/B, Series B, Rev B Request Quote
1394C-SJT05-L-RL Ser C
1394C-SJT05-L-RL/C, Series C, Rev C Request Quote
1394C-SJT05-L-RLX
1394C-SJT05-L-RL/X, Series X, Rev X Request Quote
Common misspellings:
  • l394C-SJT05-L-RL
  • 139AC-SJT05-L-RL
  • 1394C-SJTo5-L-RL
  • 1394C-SJT05-1-RL
  • 1394C-SJT05-L-R1
  • 1394CSJT05LRL

Dimensions For 1394C-SJT05-L-RL

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1394C-SJT05-L-RL

Resolutions For 1394C-SJT05-L-RL

About

Technical Specifications for 1394C-SJT05-L-RL

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-SJT05-L-RL
Product LineServo Controller
Module TypeSystem
Power Rating5 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC- IMC S Class
GMC OptionsAxisLink and Remote I/O
Input Voltage360-480AC Volts
Nominal Bus Output Voltage 380/460 Volts530/680 Volts DC
Continuous Power Output 380/460 Volts4/5 Kilowatts
Peak Power Output28 Kilowatts
Efficiency99%
Continuous Current Output7.36 Amperes
Peak Current Output15.0 Amperes
Line Loss Ride Through20 ms
Rated AC Input Voltage324-528 Volts AC, 50-60 Hertz, 3 Phase
AC Input Current6.5 Amperes
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-SJT05-L-RL
Product LineServo Controller
Module TypeSystem
Power Rating5 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC- IMC S Class
GMC OptionsAxisLink and Remote I/O
Input Voltage360-480AC Volts
Nominal Bus Output Voltage 380/460 Volts530/680 Volts DC
Continuous Power Output 380/460 Volts4/5 Kilowatts
Peak Power Output28 Kilowatts
Efficiency99%
Continuous Current Output7.36 Amperes
Peak Current Output15.0 Amperes
Line Loss Ride Through20 ms
Rated AC Input Voltage324-528 Volts AC, 50-60 Hertz, 3 Phase
AC Input Current6.5 Amperes

About 1394C-SJT05-L-RL

The 1394C-SJT05-L-RL is a member of the 1394 Allen-Bradley Servo Controller Series. It has IMC S Class integrated motion controller backing one axis and two auxiliary encoder inputs that save panel space. Moreover, the 1394C-SJT05-L-RL can run on 360 to 480 Volts DC of three-phase input power with a slide-and-lock feature, efficient IGBT power conversion, module-to-module connections, and GMC (1.5 axes) module functionality.



When two axes are synchronized with it, they are executed simultaneously. The 1394C-SJT05-L-RL has series enhancements such as terminations, EMI filtering, and smart power. It functions between 50 and 60 Hertz and it has a nominal bus output voltage of 530 to 680 Volts DC for sudden power supply fluctuation. It gives a continuous power output of 4 Kilowatts when connected to a 380-Volt source and one of 5 Kilowatts when connected to a 460-Volt source. It has a peak power output of 28 Kilowatts, an efficiency of 99%, a continuous current output of 7.36 Amps, and a line loss ride through of 20 milliseconds. The 1394C-SJT05-L-RL also has an internal shunt resistor with a 200W continuous rating and a peak rating of 40,000W. In line with this, the 1394C-SJT05-L-RL has advanced safety features such as soft current limiting, overload-tolerant operation, and IGBT technology for effectively discreet operation. It also has a protection system from phase loss, ground fault contact, and transient voltage. Thus, the controller consists of two configurable analog test outputs that can be related to critical system parameters for troubleshooting and diagnostics.

Technical Description of 1394C-SJT05-L-RL

The Allen-Bradley Servo Controller 1394C-SJT05-L-RL is a System with Terminations, Filtering (EMI), and Smart Power Series Enhancements, GMC- IMC S Class, a 5 Kilowatt Power Rating, and a 360-480AC Volts Input Voltage.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $2176cartAdd to Cart

Our highly skilled technicians can repair your 1394C-SJT05-L-RL. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $2176cartAdd to Cart

Our highly skilled technicians can repair your 1394C-SJT05-L-RL. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1394C-SJT05-L-RL such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1394C-SJT05-L-RL Ser A
1394C-SJT05-L-RL/A, Series A, Rev A Request Quote
1394C-SJT05-L-RL Ser B
1394C-SJT05-L-RL/B, Series B, Rev B Request Quote
1394C-SJT05-L-RL Ser C
1394C-SJT05-L-RL/C, Series C, Rev C Request Quote
1394C-SJT05-L-RLX
1394C-SJT05-L-RL/X, Series X, Rev X Request Quote

Common misspellings:
  • l394C-SJT05-L-RL
  • 139AC-SJT05-L-RL
  • 1394C-SJTo5-L-RL
  • 1394C-SJT05-1-RL
  • 1394C-SJT05-L-R1
  • 1394CSJT05LRL
PDF
1394C-SJT05-L-RL PDF