The 1394C-SJT10-C controller, a member of Allen-Bradley Servo Controller IMC S Class (GMC), has an AC input of 13.0 Amps. It gives a continuous power output of 8 Kilowatts when connected to a 380-Volt source and a 10-kilowatt power output when connected to a 460-Volt source. It produces a peak power output of 28 kilowatts and contains an internal shunt resistor with 200 W. Thus, it operates with an efficiency of 99%, a continuous current output of 14.73 Amps, and a line loss ride through of 20 milliseconds.

The 1394C-SJT10-C has two configurable analog test outputs that can be connected to critical system parameters for troubleshooting and diagnostics. It provides digital fault utilities which include a current monitor, thermal overload detection, and a feedback signal monitor. The 1394C-SJT10-C possesses basic inputs, a 24 Volts AC control power supply, a disconnect function, a fuse block, the main contactor, a 24 Volts DC motor brake power supply, and thermal contacts. This servo controller can operate at a wide range of rated input voltage from 324 to 528 Volts AC for varying input voltage due to power supply fluctuation. The 1394C-SJT10-C is an integrated motion controller backing four axes and providing four channels auxiliary encoder inputs with terminations, filtering (EMI), and smart power series enhancements. It is a 10-kilowatt power controller that operates at a three-phase power supply system. This GMC type motion control system uses GML software for motion programming. The 1394C-SJT10-C also has dimensions of 350 x 280 x 150 millimeters and weighs 10.68 kilograms.