The 1394C-SJT10-C- RL, a member of Allen-Bradley Servo Controller series, is an integrated motion controller with four axes and four auxiliary encoder inputs with RIO (Universal Remote), I/O, and AxisLink. This servo controller has terminations, filtering (EMI), and Smart Power. It is, moreover, a 10-kilowatt controller and runs on three-phase power. This GMC type motion controller uses GML software for motion programming. The 1394C-SJT10-C-RL has a 24 Volts AC power supply, a disconnect feature, a fuse block, a contactor, and thermal contacts. It can operate at a range of input voltage from 324 to 528 Volts AC for unanticipated varying input levels.

The 1394C-SJT10-C-RL has digital fault utilities which include thermal overload detection, a current monitor, and a feedback signal monitor. It has status LEDs for the system, motion board, Axis link, RIO, and surface mount circuitry. The 1394C-SJT10-C-RL, with digitally-adjusted velocity and current loop compensation, it caters to a wide range of system inertias. It has advanced safety features such as overload tolerant operation, soft current limiting, and IGBT technology for discreet operation. It also embedded with protection from transient voltage, phase loss, and ground fault contact. In line with this, the 1394C-SJT10-C-RL weighs 23.5 pounds and it measures 13.8 x 11.0 x 5.91 inches in dimensions.

Moreover, the 1394C-SJT10-C-RL has an AC input current (Arms) of 13.0 Amps. It gives a continuous power output of 8 kilowatts when connected to a 380-Volt source and a 10-kilowatt power output when connected to a 460-Volt source. It produces a peak power output of 28 kilowatts and contains an internal shunt resistor with a 200-watt rating. The 1394C-SJT10-C-RL operates with an efficiency of 99%, a continuous current output of 14.73 Amps, and a line loss ride through of 20 milliseconds.