1394C-SJT10-L | Allen Bradley Servo Controllers

1394C-SJT10-L

Rated 4.9 with 3 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1394C-SJT10-L

Description: The Allen-Bradley/Rockwell Automation 1394C-SJT10-L controller module comes from Series C in the Allen-Bradley 1394 Servo Controllers series. Its voltage rating is 600 Volts AC and its current rating is 30 Amps. The 1394C-SJT10-L controller module is a system module that is engineered for use in Allen-Bradley 1394 servo systems. Because it is a Series C module, the 1394C-SJT10-L controller module comes with some features that the Series A and B modules do not have. These special features include cable clamps for strain relief, an EMI filter, and a plug-in connector for input power terminations.
Available Now
Request a quote for 1394C-SJT10-L

Description: The Allen-Bradley/Rockwell Automation 1394C-SJT10-L controller module comes from Series C in the Allen-Bradley 1394 Servo Controllers series. Its voltage rating is 600 Volts AC and its current rating is 30 Amps. The 1394C-SJT10-L controller module is a system module that is engineered for use in Allen-Bradley 1394 servo systems. Because it is a Series C module, the 1394C-SJT10-L controller module comes with some features that the Series A and B modules do not have. These special features include cable clamps for strain relief, an EMI filter, and a plug-in connector for input power terminations.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1394C-SJT10-L.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 3 reviews

    Technical Specifications for 1394C-SJT10-L

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-SJT10-L
Product LineServo Controller
Module TypeSystem
Power Rating10 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC- IMC S Class
Input Voltage360-480AC Volts
Input Voltage360-480AC Volts
Nominal Bus Output Voltage 380/460 Volts530/680 Volts DC
Continuous Power Output 380/460 Volts8/10 Kilowatts
Peak Power Output28 Kilowatts
Efficiency99%
Continuous Current Output14.73 Amperes
Peak Current Output29.46 Amperes
Line Loss Ride Through20 ms
Rated AC Input Voltage324-528 Volts AC, 50-60 Hertz, 3 Phase
AC Input Current13.0 Amperes
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-SJT10-L
Product LineServo Controller
Module TypeSystem
Power Rating10 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC- IMC S Class
Input Voltage360-480AC Volts
Input Voltage360-480AC Volts
Nominal Bus Output Voltage 380/460 Volts530/680 Volts DC
Continuous Power Output 380/460 Volts8/10 Kilowatts
Peak Power Output28 Kilowatts
Efficiency99%
Continuous Current Output14.73 Amperes
Peak Current Output29.46 Amperes
Line Loss Ride Through20 ms
Rated AC Input Voltage324-528 Volts AC, 50-60 Hertz, 3 Phase
AC Input Current13.0 Amperes
s

About 1394C-SJT10-L

The Allen-Bradley 1394C-SJT10-L runs on three-phase power at 530 to 680 Volts DC at 50 to 60 Hertz. It gives a continuous power output of 8 kilowatts when connected to a 380-volt source and 10-kilowatt power output when connected to a 460-volt source. The 1394C-SJT10-L has a peak rating of 40,000 watts and a peak power output of 28 kilowatts. With an efficiency of 99%, this servo controller has a continuous current output of 14.73 Amps, a line loss ride through of 20 milliseconds, a continuous output direct current of 14.7 Amps, and an AC input current of 13.0 Amps.



The 1394C-SJT10-L provides a connector for input power, a cable clamp that for strain relief and shield bond, and Smart Power for soft-starting a power monitor. Moreover, it has advanced safety features like overload-tolerant operation, soft current limiting, and IGBT technology for discreet operation. It is also embedded with protection from transient voltage, phase loss, and earth fault contact. The 1394C-SJT10-L, is an IMC S Class integrated motion controller that supports one axis and two auxiliary encoder inputs to save panel space. It is programmed using Graphical Motion Control Language.  Moreover, the 1394C-SJT10-L provides a direct line connection that minimizes the use of the transformer.

Technical Description of 1394C-SJT10-L

The Allen-Bradley Servo Controller 1394C-SJT10-L is a System with Terminations, Filtering (EMI), and Smart Power Series Enhancements, GMC- IMC S Class, a 10 Kilowatt Power Rating, and a 360-480AC Volts Input Voltage.

Repair Services for 1394C-SJT10-L

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1394C-SJT10-L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1394C-SJT10-L

Please refer to the manual for more information about the 1394C-SJT10-L such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1394C-SJT10-L/A, Series A, Rev A Request Quote
1394C-SJT10-L/B, Series B, Rev B Request Quote
1394C-SJT10-L/C, Series C, Rev C Request Quote
1394C-SJT10-LX
1394C-SJT10-L/X, Series X, Rev X Request Quote
Common misspellings:
  • l394C-SJT10-L
  • 139AC-SJT10-L
  • 1394C-SJTl0-L
  • 1394C-SJT1o-L
  • 1394C-SJT10-1
  • 1394CSJT10L

Dimensions For 1394C-SJT10-L

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1394C-SJT10-L

Resolutions For 1394C-SJT10-L

About

Technical Specifications for 1394C-SJT10-L

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-SJT10-L
Product LineServo Controller
Module TypeSystem
Power Rating10 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC- IMC S Class
Input Voltage360-480AC Volts
Input Voltage360-480AC Volts
Nominal Bus Output Voltage 380/460 Volts530/680 Volts DC
Continuous Power Output 380/460 Volts8/10 Kilowatts
Peak Power Output28 Kilowatts
Efficiency99%
Continuous Current Output14.73 Amperes
Peak Current Output29.46 Amperes
Line Loss Ride Through20 ms
Rated AC Input Voltage324-528 Volts AC, 50-60 Hertz, 3 Phase
AC Input Current13.0 Amperes
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394C-SJT10-L
Product LineServo Controller
Module TypeSystem
Power Rating10 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC- IMC S Class
Input Voltage360-480AC Volts
Input Voltage360-480AC Volts
Nominal Bus Output Voltage 380/460 Volts530/680 Volts DC
Continuous Power Output 380/460 Volts8/10 Kilowatts
Peak Power Output28 Kilowatts
Efficiency99%
Continuous Current Output14.73 Amperes
Peak Current Output29.46 Amperes
Line Loss Ride Through20 ms
Rated AC Input Voltage324-528 Volts AC, 50-60 Hertz, 3 Phase
AC Input Current13.0 Amperes

About 1394C-SJT10-L

The Allen-Bradley 1394C-SJT10-L runs on three-phase power at 530 to 680 Volts DC at 50 to 60 Hertz. It gives a continuous power output of 8 kilowatts when connected to a 380-volt source and 10-kilowatt power output when connected to a 460-volt source. The 1394C-SJT10-L has a peak rating of 40,000 watts and a peak power output of 28 kilowatts. With an efficiency of 99%, this servo controller has a continuous current output of 14.73 Amps, a line loss ride through of 20 milliseconds, a continuous output direct current of 14.7 Amps, and an AC input current of 13.0 Amps.



The 1394C-SJT10-L provides a connector for input power, a cable clamp that for strain relief and shield bond, and Smart Power for soft-starting a power monitor. Moreover, it has advanced safety features like overload-tolerant operation, soft current limiting, and IGBT technology for discreet operation. It is also embedded with protection from transient voltage, phase loss, and earth fault contact. The 1394C-SJT10-L, is an IMC S Class integrated motion controller that supports one axis and two auxiliary encoder inputs to save panel space. It is programmed using Graphical Motion Control Language.  Moreover, the 1394C-SJT10-L provides a direct line connection that minimizes the use of the transformer.

Technical Description of 1394C-SJT10-L

The Allen-Bradley Servo Controller 1394C-SJT10-L is a System with Terminations, Filtering (EMI), and Smart Power Series Enhancements, GMC- IMC S Class, a 10 Kilowatt Power Rating, and a 360-480AC Volts Input Voltage.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1394C-SJT10-L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1394C-SJT10-L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1394C-SJT10-L such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1394C-SJT10-L/A, Series A, Rev A Request Quote
1394C-SJT10-L/B, Series B, Rev B Request Quote
1394C-SJT10-L/C, Series C, Rev C Request Quote
1394C-SJT10-LX
1394C-SJT10-L/X, Series X, Rev X Request Quote

Common misspellings:
  • l394C-SJT10-L
  • 139AC-SJT10-L
  • 1394C-SJTl0-L
  • 1394C-SJT1o-L
  • 1394C-SJT10-1
  • 1394CSJT10L
PDF