1394CAM75IHC | Allen Bradley Servo Controllers

1394CAM75IHC

Rated 4.5 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1394CAM75IHC

Description: The Allen-Bradley Servo Controller 1394CAM75IHC is a System with Terminations, Filtering (EMI), and Smart Power Series Enhancements, GMC Turbo- IMC S Class, a 22 Kilowatt Power Rating, and a 360-480AC Volts Input Voltage.
Call
Request a quote for 1394CAM75IHC

Description: The Allen-Bradley Servo Controller 1394CAM75IHC is a System with Terminations, Filtering (EMI), and Smart Power Series Enhancements, GMC Turbo- IMC S Class, a 22 Kilowatt Power Rating, and a 360-480AC Volts Input Voltage.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1394CAM75IHC.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 20 reviews

    Technical Specifications for 1394CAM75IHC

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394CAM75IHC
Product LineServo Controller
Module TypeSystem
Power Rating22 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC Turbo- IMC S Class
GMC OptionsAxisLink and Remote I/O
Input Voltage360-480AC Volts
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394CAM75IHC
Product LineServo Controller
Module TypeSystem
Power Rating22 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC Turbo- IMC S Class
GMC OptionsAxisLink and Remote I/O
Input Voltage360-480AC Volts
s

About 1394CAM75IHC

The 1394C-AM75-IHC 1394 Drive Axis module by Allen-Bradley is a Drive Axis Module for the 1394x-SJTxx-C System with a cable clamp and EMI filter which convert the DC power supplied by the system module to a variable AC voltage. The 1394C-AM75-IHC is an Axis module in the 1394 Axis Module Series C, and like every module in the series, it comes with a cable clamp for strain relief and for shield bond, and it has an EMI filter option for the motor DC brake and the thermal circuit. The 1394C-AM75-IHC has 0 to 0.05% regulation of base speed, with 100% torque disturbance, and a Static Gain of 22.8rms A/mV. It has an adjustable peak current limit of up to 143%, with 5 kHz (±10%) modulation frequency range, and it has a maximum operational drift of 0.03rpm/degree Celsius. The module has a nominal input voltage of 530/680V DC, with a continuous input current of 35A, and a peak input current of 50A. It has a continuous output power rating of 17.8kW and 23.8kW at 360V AC and 460V AC, with 660 µF module’s capacitance, and it has an overall efficiency of 98%. The 1394C-AM75-IHC’s operational temperature range is 0º C to 50º C (32º F to 122º F) at 5 to 95% non-condensing relative humidity, and it can function without de-rating, at a maximum installation altitude of 1000m. It weighs approximately 6.73kg (14.8lb), and it has overall dimensions of 400mm x 385mm x 280mm (15.75in x 15.16in x 11.01in).



Repair Services for 1394CAM75IHC

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1394CAM75IHC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1394CAM75IHC

Please refer to the manual for more information about the 1394CAM75IHC such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1394CAM75IHC/A, Series A, Rev A Request Quote
1394CAM75IHCX
1394CAM75IHC/X, Series X, Rev X Request Quote
Common misspellings:
  • l394CAM75IHC
  • 139ACAM75IHC
  • 1394CAM75IHC

Dimensions For 1394CAM75IHC

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1394CAM75IHC

Resolutions For 1394CAM75IHC

About

Technical Specifications for 1394CAM75IHC

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394CAM75IHC
Product LineServo Controller
Module TypeSystem
Power Rating22 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC Turbo- IMC S Class
GMC OptionsAxisLink and Remote I/O
Input Voltage360-480AC Volts
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394CAM75IHC
Product LineServo Controller
Module TypeSystem
Power Rating22 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC Turbo- IMC S Class
GMC OptionsAxisLink and Remote I/O
Input Voltage360-480AC Volts

About 1394CAM75IHC

The 1394C-AM75-IHC 1394 Drive Axis module by Allen-Bradley is a Drive Axis Module for the 1394x-SJTxx-C System with a cable clamp and EMI filter which convert the DC power supplied by the system module to a variable AC voltage. The 1394C-AM75-IHC is an Axis module in the 1394 Axis Module Series C, and like every module in the series, it comes with a cable clamp for strain relief and for shield bond, and it has an EMI filter option for the motor DC brake and the thermal circuit. The 1394C-AM75-IHC has 0 to 0.05% regulation of base speed, with 100% torque disturbance, and a Static Gain of 22.8rms A/mV. It has an adjustable peak current limit of up to 143%, with 5 kHz (±10%) modulation frequency range, and it has a maximum operational drift of 0.03rpm/degree Celsius. The module has a nominal input voltage of 530/680V DC, with a continuous input current of 35A, and a peak input current of 50A. It has a continuous output power rating of 17.8kW and 23.8kW at 360V AC and 460V AC, with 660 µF module’s capacitance, and it has an overall efficiency of 98%. The 1394C-AM75-IHC’s operational temperature range is 0º C to 50º C (32º F to 122º F) at 5 to 95% non-condensing relative humidity, and it can function without de-rating, at a maximum installation altitude of 1000m. It weighs approximately 6.73kg (14.8lb), and it has overall dimensions of 400mm x 385mm x 280mm (15.75in x 15.16in x 11.01in).



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1394CAM75IHC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1394CAM75IHC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1394CAM75IHC such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1394CAM75IHC/A, Series A, Rev A Request Quote
1394CAM75IHCX
1394CAM75IHC/X, Series X, Rev X Request Quote

Common misspellings:
  • l394CAM75IHC
  • 139ACAM75IHC
  • 1394CAM75IHC
PDF