1394SJT05AA | Allen Bradley Servo Controllers

1394SJT05AA

Rated 4.7 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1394SJT05AA

Description: The Allen-Bradley 1394SJT05AA is a servo control device with a factory-installed +/-10 Volts DC analog input. This analog product line is part of Allen-Bradley’s 1394 digital AC multi-axis motion control and drive system family. It has an input voltage specification of 360 to 480 Volts AC at 50 to 60 Hertz. Its input features ground fault, phase loss, and transient voltage protection. read more...
Call
Request a quote for 1394SJT05AA

Description: The Allen-Bradley 1394SJT05AA is a servo control device with a factory-installed +/-10 Volts DC analog input. This analog product line is part of Allen-Bradley’s 1394 digital AC multi-axis motion control and drive system family. It has an input voltage specification of 360 to 480 Volts AC at 50 to 60 Hertz. Its input features ground fault, phase loss, and transient voltage protection. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1394SJT05AA.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 15 reviews

    Technical Specifications for 1394SJT05AA

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394SJT05AA
Product LineServo Controller
Module TypeSystem
Power Rating22 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC Turbo- IMC S Class
Input Voltage50-60 Hertz
Input Voltage360-480AC Volts
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394SJT05AA
Product LineServo Controller
Module TypeSystem
Power Rating22 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC Turbo- IMC S Class
Input Voltage50-60 Hertz
Input Voltage360-480AC Volts
s

About 1394SJT05AA

The Allen-Bradley 1394SJT05AA is a servo control device with a factory-installed +/-10 Volts DC analog input. This analog product line is part of Allen-Bradley’s 1394 digital AC multi-axis motion control and drive system family. It has an input voltage specification of 360 to 480 Volts AC at 50 to 60 Hertz. Its input features ground fault, phase loss, and transient voltage protection. This 5kW-rated module has an internal shunt resistor with a 200W continuous rating and a 40,000W peak rating. It requires 24 Volts AC or DC logic power for module and contactor enable.



The IGBT technology that powers the 1394SJT05AA makes operation quiet and dynamic. With a slide-and-lock module-to-module mechanism, the need for additional bus bars and wiring harnesses is eliminated. The 1394SJT05AA analog servo drive can connect with Allen-Bradley universal bulletin HMIs. It can be used for velocity and torque control when networked with digital servo drive systems. Its 2 configurable analog test outputs are linked with critical drive parameters for efficient troubleshooting. The encoder signal output (A QUAD B) is for encoder emulation. Each A Quad B interface includes both a velocity and torque command for direct connectivity with external motion controllers.

Technical Description of 1394SJT05AA

The Allen-Bradley Servo Controller 1394SJT05AA is a System with Terminations, Filtering (EMI), and Smart Power Series Enhancements, GMC Turbo- IMC S Class, a 22 Kilowatt Power Rating, and a 360-480AC Volts Input Voltage.

Repair Services for 1394SJT05AA

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1394SJT05AA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1394SJT05AA

Please refer to the manual for more information about the 1394SJT05AA such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1394SJT05AA/A, Series A, Rev A Request Quote
1394SJT05AAX
1394SJT05AA/X, Series X, Rev X Request Quote
Common misspellings:
  • l394SJT05AA
  • 139ASJT05AA
  • 1394SJTo5AA
  • 1394SJT05AA

Dimensions For 1394SJT05AA

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1394SJT05AA

Resolutions For 1394SJT05AA

About

Technical Specifications for 1394SJT05AA

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394SJT05AA
Product LineServo Controller
Module TypeSystem
Power Rating22 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC Turbo- IMC S Class
Input Voltage50-60 Hertz
Input Voltage360-480AC Volts
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1394SJT05AA
Product LineServo Controller
Module TypeSystem
Power Rating22 Kilowatt
Input Phase3 Phase
Series EnhancementsTerminations, Filtering (EMI), and Smart Power
Factory-Installed OptionsGMC Turbo- IMC S Class
Input Voltage50-60 Hertz
Input Voltage360-480AC Volts

About 1394SJT05AA

The Allen-Bradley 1394SJT05AA is a servo control device with a factory-installed +/-10 Volts DC analog input. This analog product line is part of Allen-Bradley’s 1394 digital AC multi-axis motion control and drive system family. It has an input voltage specification of 360 to 480 Volts AC at 50 to 60 Hertz. Its input features ground fault, phase loss, and transient voltage protection. This 5kW-rated module has an internal shunt resistor with a 200W continuous rating and a 40,000W peak rating. It requires 24 Volts AC or DC logic power for module and contactor enable.



The IGBT technology that powers the 1394SJT05AA makes operation quiet and dynamic. With a slide-and-lock module-to-module mechanism, the need for additional bus bars and wiring harnesses is eliminated. The 1394SJT05AA analog servo drive can connect with Allen-Bradley universal bulletin HMIs. It can be used for velocity and torque control when networked with digital servo drive systems. Its 2 configurable analog test outputs are linked with critical drive parameters for efficient troubleshooting. The encoder signal output (A QUAD B) is for encoder emulation. Each A Quad B interface includes both a velocity and torque command for direct connectivity with external motion controllers.

Technical Description of 1394SJT05AA

The Allen-Bradley Servo Controller 1394SJT05AA is a System with Terminations, Filtering (EMI), and Smart Power Series Enhancements, GMC Turbo- IMC S Class, a 22 Kilowatt Power Rating, and a 360-480AC Volts Input Voltage.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1394SJT05AA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1394SJT05AA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1394SJT05AA such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1394SJT05AA/A, Series A, Rev A Request Quote
1394SJT05AAX
1394SJT05AA/X, Series X, Rev X Request Quote

Common misspellings:
  • l394SJT05AA
  • 139ASJT05AA
  • 1394SJTo5AA
  • 1394SJT05AA
PDF