The S811+T24N3S soft starter is an S811+ is a non-combination soft starter manufactured by Eaton. Its voltage rating is 200 to 600 Volts AC, at 60 Hertz, and it uses 3-phase voltage. Its current rating is 240 Amps and it has a power rating of 75 to 147 kilowatts or 75 to 200 Horsepower. Its control voltage is 24 Volts DC and its frame size is 200 millimeters. This module provides microprocessor-based control to apply a soft start or soft stop to motors in applications that may not require 100% of the motor’s starting torque. Programmable startup options are built into the S811+T24N3S soft starter to meet the requirements of a variety of applications. Some of its starting and stopping modes include the voltage ramp start with adjustable torque and adjustable ramp time and the current limit start. The kick start function on this module provides higher initial torque to break away high-friction loads. It also features an adjustable soft stop process for applications that require a longer stopping duration than a coast-to-stop process will provide.
The S811+T24N3S soft starter offers pump control that minimizes the pressure caused by the “water hammer effect,” thereby preventing the downtime caused by damaged pipes or pumps. The communication module on the S811+T24N3S soft starter supports the Modbus RTU protocol and many other communication protocols. It features an intuitive operator interface that is equipped with a liquid crystal display and keypad, and the starter’s system operating parameters can be monitored remotely through a communication network. The internal solid-state overload protection on this module and its diagnostics components provide accurate current and thermal measurements to prevent nuisance trips and to protect the motor and system from fault conditions.
Repair Services for S811+T24N3S
||Ask|| Get Quote |
Our highly skilled technicians can repair your S811+T24N3S. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.