MOPEG240C | Eaton Cutler-Hammer PLC Eaton Motor Operators

MOPEG240C

MOPEG240C

Description: The MOPEG240C module is an electrical motor operator module manufactured by Eaton. This module is designed to work with Eaton Series G, types EGB, EGE, EHC, EGS, and EGH circuit breakers in the E-frame family. Its ratings are 100 to 220 Volts AC or 100 to 220 Volts DC operating voltage, 1 Amp of inrush current, and 50 to 60 Hertz of operating frequency. The motor operator module enables the users to accomplish remote or local switching for the ON, OFF, and RESET functions of a circuit breaker remotely or locally. read more...
Rated 4.7 with 16 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for MOPEG240C

Add more parts to quote

Description: The MOPEG240C module is an electrical motor operator module manufactured by Eaton. This module is designed to work with Eaton Series G, types EGB, EGE, EHC, EGS, and EGH circuit breakers in the E-frame family. Its ratings are 100 to 220 Volts AC or 100 to 220 Volts DC operating voltage, 1 Amp of inrush current, and 50 to 60 Hertz of operating frequency. The motor operator module enables the users to accomplish remote or local switching for the ON, OFF, and RESET functions of a circuit breaker remotely or locally. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the MOPEG240C.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 16 reviews

    Technical Specifications for MOPEG240C

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.MOPEG240C
Product TypeMotor Operator
FrameSeries G E
Voltage100-220 Volts DC
FrequencyDC
Inrush CurrentManual Operating
KeyPush-to-Trip
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.MOPEG240C
Product TypeMotor Operator
FrameSeries G E
Voltage100-220 Volts DC
FrequencyDC
Inrush CurrentManual Operating
KeyPush-to-Trip
s

About MOPEG240C

The MOPEG240C module is an electrical motor operator module manufactured by Eaton. This module is designed to work with Eaton Series G, types EGB, EGE, EHC, EGS, and EGH circuit breakers in the E-frame family. Its ratings are 100 to 220 Volts AC or 100 to 220 Volts DC operating voltage, 1 Amp of inrush current, and 50 to 60 Hertz of operating frequency. The motor operator module enables the users to accomplish remote or local switching for the ON, OFF, and RESET functions of a circuit breaker remotely or locally. Both modes of operation support the manual and automatic control of the unit. In manual mode, the operating key that ships with the MOPEG240C motor operator module can be used to locally open, close, or reset a circuit breaker’s contacts through the keyhole.



Controlling the MOPEG240C motor operator module remotely involves the use of its built-in motor and cam drive mechanism to regulate the components that operate the circuit breaker handle. This unit is meant to be mounted on the front cover of the circuit breaker within its dimensions. The internal limit switches and relays on this unit are tasked with controlling motor operation by making sure the circuit breaker handle is only moved within a defined range. The Eaton MOPEG240C motor operator module can be manually tripped through its push-to-trip button. It incorporates a pull-out locking mechanism for locking the circuit breaker handle in the OFF position with a padlock and it can be used in standard load transfer switching applications. The status of this unit is visible through the status indicator on its front cover.



Technical Description of MOPEG240C

The Eaton MOPEG240C Motor Operator operates with a 1 Amps Inrush Current and a 100-220 Volts DC Voltage. It has a Push-to-Trip Button and a Manual Operating Key.

Repair Services for MOPEG240C

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your MOPEG240C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For MOPEG240C

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For MOPEG240C

Resolutions For MOPEG240C

About

Technical Specifications for MOPEG240C

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.MOPEG240C
Product TypeMotor Operator
FrameSeries G E
Voltage100-220 Volts DC
FrequencyDC
Inrush CurrentManual Operating
KeyPush-to-Trip
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.MOPEG240C
Product TypeMotor Operator
FrameSeries G E
Voltage100-220 Volts DC
FrequencyDC
Inrush CurrentManual Operating
KeyPush-to-Trip

About MOPEG240C

The MOPEG240C module is an electrical motor operator module manufactured by Eaton. This module is designed to work with Eaton Series G, types EGB, EGE, EHC, EGS, and EGH circuit breakers in the E-frame family. Its ratings are 100 to 220 Volts AC or 100 to 220 Volts DC operating voltage, 1 Amp of inrush current, and 50 to 60 Hertz of operating frequency. The motor operator module enables the users to accomplish remote or local switching for the ON, OFF, and RESET functions of a circuit breaker remotely or locally. Both modes of operation support the manual and automatic control of the unit. In manual mode, the operating key that ships with the MOPEG240C motor operator module can be used to locally open, close, or reset a circuit breaker’s contacts through the keyhole.



Controlling the MOPEG240C motor operator module remotely involves the use of its built-in motor and cam drive mechanism to regulate the components that operate the circuit breaker handle. This unit is meant to be mounted on the front cover of the circuit breaker within its dimensions. The internal limit switches and relays on this unit are tasked with controlling motor operation by making sure the circuit breaker handle is only moved within a defined range. The Eaton MOPEG240C motor operator module can be manually tripped through its push-to-trip button. It incorporates a pull-out locking mechanism for locking the circuit breaker handle in the OFF position with a padlock and it can be used in standard load transfer switching applications. The status of this unit is visible through the status indicator on its front cover.



Technical Description of MOPEG240C

The Eaton MOPEG240C Motor Operator operates with a 1 Amps Inrush Current and a 100-220 Volts DC Voltage. It has a Push-to-Trip Button and a Manual Operating Key.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your MOPEG240C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your MOPEG240C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF