DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Eaton MOPLG24D Motor Operator operates with a 6 Amps Inrush Current and a 24 Volts DC Voltage. It has a Push-to-Trip Button and a Manual Operating Key.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the MOPLG24D. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | MOPLG24D |
Product Type | Motor Operator |
Frame | Series G L |
Voltage | 24 Volts DC |
Frequency | DC |
Inrush Current | Manual Operating |
Key | Push-to-Trip |
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | MOPLG24D |
Product Type | Motor Operator |
Frame | Series G L |
Voltage | 24 Volts DC |
Frequency | DC |
Inrush Current | Manual Operating |
Key | Push-to-Trip |
The MOPLG24D module is a Series G molded case circuit breaker motor operator module manufactured by Eaton. It is rated at 6 Amps and 24 Volts DC, and it has an L frame. This module is designed to offer a reliable solution for the remote and local ON, OFF, and RESET switching of a circuit breaker. Note that a special locking device may be used to lock the breaker handle in the OFF position. The remote capability makes it suitable for both manned and unmanned applications, and the limit switches and relays on this motor operator module control the motor operation to prevent circuit breaker overdrive and to provide motor overload protection.
The MOPLG24D motor operator module has multiple modes of operation. It features an operating keyhole at the center of the front panel and a push-to-trip button for manual operation. It also incorporates a cam drive mechanism that is powered by a motor to operate the toggle handle of the circuit breaker. This module can be used as a component for standard load transfer switching by using another motor operator module and circuit breaker alongside this operator module and its circuit breaker with a mechanical interlock. The front cover of the MOPLG24D moto operator module has a set of status indicators for the ON, OFF, and TRIPPED status of a connected circuit breaker. All of the incoming power must be disconnected from the breaker before installing or replacing the MOPLG24D module. It is suitable for use in different industrial environments but exposure to corrosive gasses, vapor, or rainfall may damage this unit.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your MOPLG24D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | MOPLG24D |
Product Type | Motor Operator |
Frame | Series G L |
Voltage | 24 Volts DC |
Frequency | DC |
Inrush Current | Manual Operating |
Key | Push-to-Trip |
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | MOPLG24D |
Product Type | Motor Operator |
Frame | Series G L |
Voltage | 24 Volts DC |
Frequency | DC |
Inrush Current | Manual Operating |
Key | Push-to-Trip |
The MOPLG24D module is a Series G molded case circuit breaker motor operator module manufactured by Eaton. It is rated at 6 Amps and 24 Volts DC, and it has an L frame. This module is designed to offer a reliable solution for the remote and local ON, OFF, and RESET switching of a circuit breaker. Note that a special locking device may be used to lock the breaker handle in the OFF position. The remote capability makes it suitable for both manned and unmanned applications, and the limit switches and relays on this motor operator module control the motor operation to prevent circuit breaker overdrive and to provide motor overload protection.
The MOPLG24D motor operator module has multiple modes of operation. It features an operating keyhole at the center of the front panel and a push-to-trip button for manual operation. It also incorporates a cam drive mechanism that is powered by a motor to operate the toggle handle of the circuit breaker. This module can be used as a component for standard load transfer switching by using another motor operator module and circuit breaker alongside this operator module and its circuit breaker with a mechanical interlock. The front cover of the MOPLG24D moto operator module has a set of status indicators for the ON, OFF, and TRIPPED status of a connected circuit breaker. All of the incoming power must be disconnected from the breaker before installing or replacing the MOPLG24D module. It is suitable for use in different industrial environments but exposure to corrosive gasses, vapor, or rainfall may damage this unit.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your MOPLG24D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your MOPLG24D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.