DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 91-00992-05 terminal is a PanelMate operator interface terminal by Eaton Cutler-Hammer. It is used for industrial applications.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 91-00992-05. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Eaton Cutler-Hammer |
Series | Panelmate 92** |
Part Number | 91-00992-05 |
Description | Operator interface terminal |
Screen size | 14 inches |
Refresh frequency | 60 Hertz |
Dot pitch | 0.28 millimeters |
Screen resolution | 256 x 256 pixels |
Baud rate | 110 to 38400 Baud |
Temperature | 0 to 50 degrees Celsius |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Eaton Cutler-Hammer 91-00992-05 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 91-00992-05 units instead of migration.
Brand | Eaton Cutler-Hammer |
Series | Panelmate 92** |
Part Number | 91-00992-05 |
Description | Operator interface terminal |
Screen size | 14 inches |
Refresh frequency | 60 Hertz |
Dot pitch | 0.28 millimeters |
Screen resolution | 256 x 256 pixels |
Baud rate | 110 to 38400 Baud |
Temperature | 0 to 50 degrees Celsius |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Eaton Cutler-Hammer 91-00992-05 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 91-00992-05 units instead of migration.
sThe 91-00992-05 terminal is an industrial-grade display unit by Eaton Cutler-Hammer. It is an operator interface terminal from the PanelMate 92** series. It is a CRT terminal. The images on the screen are produced by using an electron beam striking a phosphorescent surface. The electron gun configuration of the monitor is inline. It has a dot pitch of 0.28 millimeters. It is compatible with different Eaton PLC and industrial communication networks. The interface panel is useful for showing the status and information of different industrial application processes. The 91-00992-05 terminal is compact in size and it can be easily installed with a PLC system. The display terminal has a 14-inch CRT display with a screen resolution of 256 x 256 pixels. The CRT module comes with a refresh frequency of 60 Hertz. This microprocessor enabled terminal can also store a message in its flash memory.
The Eaton 91-00992-05 terminal is equipped with a keypad unit. The keypad can be used to configure the display. A serial port is present in the terminal which can be used to connect with a printer, a computer, or other devices. The serial port has a selectable baud rate between 110 to 38400 baud. The display unit can also be connected with an optional audio feedback kit for audio output. A realtime clock is present in the monitor and it is backed up with an internal lithium battery. The 91-00992-05 terminal should be kept away from the AC magnetic field. The environmental temperature should be set between 0 and 50 degrees Celsius. The CRT monitor is certified by the IEC 801-5, UL, and CSA standards.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 91-00992-05. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Eaton Cutler-Hammer |
Series | Panelmate 92** |
Part Number | 91-00992-05 |
Description | Operator interface terminal |
Screen size | 14 inches |
Refresh frequency | 60 Hertz |
Dot pitch | 0.28 millimeters |
Screen resolution | 256 x 256 pixels |
Baud rate | 110 to 38400 Baud |
Temperature | 0 to 50 degrees Celsius |
Product Lifecycle Status* | Discontinued/Obsolete |
Brand | Eaton Cutler-Hammer |
Series | Panelmate 92** |
Part Number | 91-00992-05 |
Description | Operator interface terminal |
Screen size | 14 inches |
Refresh frequency | 60 Hertz |
Dot pitch | 0.28 millimeters |
Screen resolution | 256 x 256 pixels |
Baud rate | 110 to 38400 Baud |
Temperature | 0 to 50 degrees Celsius |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Eaton Cutler-Hammer 91-00992-05 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 91-00992-05 units instead of migration.
The 91-00992-05 terminal is an industrial-grade display unit by Eaton Cutler-Hammer. It is an operator interface terminal from the PanelMate 92** series. It is a CRT terminal. The images on the screen are produced by using an electron beam striking a phosphorescent surface. The electron gun configuration of the monitor is inline. It has a dot pitch of 0.28 millimeters. It is compatible with different Eaton PLC and industrial communication networks. The interface panel is useful for showing the status and information of different industrial application processes. The 91-00992-05 terminal is compact in size and it can be easily installed with a PLC system. The display terminal has a 14-inch CRT display with a screen resolution of 256 x 256 pixels. The CRT module comes with a refresh frequency of 60 Hertz. This microprocessor enabled terminal can also store a message in its flash memory.
The Eaton 91-00992-05 terminal is equipped with a keypad unit. The keypad can be used to configure the display. A serial port is present in the terminal which can be used to connect with a printer, a computer, or other devices. The serial port has a selectable baud rate between 110 to 38400 baud. The display unit can also be connected with an optional audio feedback kit for audio output. A realtime clock is present in the monitor and it is backed up with an internal lithium battery. The 91-00992-05 terminal should be kept away from the AC magnetic field. The environmental temperature should be set between 0 and 50 degrees Celsius. The CRT monitor is certified by the IEC 801-5, UL, and CSA standards.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 91-00992-05. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 91-00992-05. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.