92-00556-07 - In Stock | Eaton Cutler-Hammer Panelmate Panelmate 92**

92-00556-07

92-00556-07

Description:

The Eaton Cutler-Hammer 92-00556-07 operator interface has an approximate weight of 22 pounds and it comes with the materials it needs to be mounted. It operates with single-phase voltage.

Rated 5 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

In Stock Ships Today

Submit RFQ for 92-00556-07

Add more parts to quote

Description:

The Eaton Cutler-Hammer 92-00556-07 operator interface has an approximate weight of 22 pounds and it comes with the materials it needs to be mounted. It operates with single-phase voltage.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 92-00556-07.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 14 reviews

    Technical Specifications for 92-00556-07

BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-00556-07
PartCRT Module
FunctionHuman-Machine Interface
Installation Wall, floor, panel and rack mounted
Operating temperature 0-50°C0 to 50 degrees Celsius
KeypadYes
ScreenYes
Voltage120 to 230V AC
Compatibility PLCs including Allen-Bradley structure
ClearancesWhen enclosed
Additional featuresTemplates, graphics, fonts
Data transferYes, through an EEPROM cartridge
AccessoriesYes
Product Lifecycle Status*Discontinued/Obsolete

*The Eaton Cutler-Hammer 92-00556-07 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 92-00556-07 units instead of migration.

BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-00556-07
PartCRT Module
FunctionHuman-Machine Interface
Installation Wall, floor, panel and rack mounted
Operating temperature 0-50°C0 to 50 degrees Celsius
KeypadYes
ScreenYes
Voltage120 to 230V AC
Compatibility PLCs including Allen-Bradley structure
ClearancesWhen enclosed
Additional featuresTemplates, graphics, fonts
Data transferYes, through an EEPROM cartridge
AccessoriesYes
Product Lifecycle Status*Discontinued/Obsolete

*The Eaton Cutler-Hammer 92-00556-07 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 92-00556-07 units instead of migration.

s

About 92-00556-07

The Eaton 92-00556-07 interface is an operator interface that belongs to the PanelMate 92** series. This interface provides a touchscreen display that shows the current application phases that the connected PLC is going through. Operators can use this interface to control the PLC and be informed about the current status of their equipment and the application process. The PanelMate interfaces made by Eaton Cutler-Hammer are known for their innovative graphics, templates, and their space-saving capabilities. The Eaton Cutler-Hammer 92-00556-07 operator interface operates with a voltage range of 110 to 230 Volts AC and a frequency of 50 to 60 Hertz. This interface comes with the protective housing that can be mounted on a floor, a wall, or a panel and it can be installed in a rack or a more protective enclosure. This makes the interface versatile enough to be used and installed according to different application requirements. This interface also provides data transfers between other interfaces and equipment through the use of an EEPROM cartridge.



 



The Eaton Cutler-Hammer 92-00556-07 operator interface has an approximate weight of 22 pounds and the following dimensions: a height of 48.3 centimeters, a width of 38.1 centimeters, and a depth of 40.6 centimeters. The interface can withstand harsh environments and a maximum temperature of 50 degrees Celsius as well as a relative humidity level of 5 to 95 percent without condensation. It is important to preserve these conditions so the normal lifespan of the interface can be maintained. The Eaton Cutler-Hammer 92-00556-07 operator interface comes with a hardware manual and one shipping kit that includes accessories such as a packet of mounting nuts and washers, 2-terminal connectors, a 3-terminal connector, and a cutout torque drawing.



This content was written and compiled by DO Supply and should not be copied.

Repair Services for 92-00556-07

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-00556-07. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 92-00556-07

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 92-00556-07

Resolutions For 92-00556-07

About

Technical Specifications for 92-00556-07

BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-00556-07
PartCRT Module
FunctionHuman-Machine Interface
Installation Wall, floor, panel and rack mounted
Operating temperature 0-50°C0 to 50 degrees Celsius
KeypadYes
ScreenYes
Voltage120 to 230V AC
Compatibility PLCs including Allen-Bradley structure
ClearancesWhen enclosed
Additional featuresTemplates, graphics, fonts
Data transferYes, through an EEPROM cartridge
AccessoriesYes
Product Lifecycle Status*Discontinued/Obsolete
BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-00556-07
PartCRT Module
FunctionHuman-Machine Interface
Installation Wall, floor, panel and rack mounted
Operating temperature 0-50°C0 to 50 degrees Celsius
KeypadYes
ScreenYes
Voltage120 to 230V AC
Compatibility PLCs including Allen-Bradley structure
ClearancesWhen enclosed
Additional featuresTemplates, graphics, fonts
Data transferYes, through an EEPROM cartridge
AccessoriesYes
Product Lifecycle Status*Discontinued/Obsolete

*The Eaton Cutler-Hammer 92-00556-07 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 92-00556-07 units instead of migration.

About 92-00556-07

The Eaton 92-00556-07 interface is an operator interface that belongs to the PanelMate 92** series. This interface provides a touchscreen display that shows the current application phases that the connected PLC is going through. Operators can use this interface to control the PLC and be informed about the current status of their equipment and the application process. The PanelMate interfaces made by Eaton Cutler-Hammer are known for their innovative graphics, templates, and their space-saving capabilities. The Eaton Cutler-Hammer 92-00556-07 operator interface operates with a voltage range of 110 to 230 Volts AC and a frequency of 50 to 60 Hertz. This interface comes with the protective housing that can be mounted on a floor, a wall, or a panel and it can be installed in a rack or a more protective enclosure. This makes the interface versatile enough to be used and installed according to different application requirements. This interface also provides data transfers between other interfaces and equipment through the use of an EEPROM cartridge.



 



The Eaton Cutler-Hammer 92-00556-07 operator interface has an approximate weight of 22 pounds and the following dimensions: a height of 48.3 centimeters, a width of 38.1 centimeters, and a depth of 40.6 centimeters. The interface can withstand harsh environments and a maximum temperature of 50 degrees Celsius as well as a relative humidity level of 5 to 95 percent without condensation. It is important to preserve these conditions so the normal lifespan of the interface can be maintained. The Eaton Cutler-Hammer 92-00556-07 operator interface comes with a hardware manual and one shipping kit that includes accessories such as a packet of mounting nuts and washers, 2-terminal connectors, a 3-terminal connector, and a cutout torque drawing.



This content was written and compiled by DO Supply and should not be copied.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-00556-07. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-00556-07. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF