The Eaton Cutler-Hammer 92-00560-00 PanelMate 4000 operator interface with an upgraded LCD monitor is an operator interface device from the Eaton Modicon PanelMate 4000 Plus operator interface series. The PanelMate 4000 operator interface family features interface devices with a rugged and compact design that offers a complete graphical interface solution to industrial applications and that are also economical and cost-effective. The 92-00560-00 operator interface supports both the Panelmate 4000 split architecture and the standard keypad unit. The 92-00560-00 interface offers the operators a wide 14-inch CRT display screen with a keypad for operator input. This screen provides the operators with a graphical view into their machine application processes for the control, troubleshooting, and monitoring of PLC applications. The 92-00560-00 interface’s LCD offers 256 colors (with 8-state Power-Blink) in its graphcis, with a standard display resolution of 640 x 480 pixels (VGA) and a dot pitch rating of 0.28 millimeters for a sharp image display.

The 92-00560-00 interface has a refresh frequency rating of 60 Hertz and a horizontal scan rate of 31.5 kilohertz. The 92-00560-00 interface is designed to withstand harsh environmental conditions and to be mounted in an enclosure on the factory floor. The installation of the 92-00560-00 interface within a suitable industrial enclosure is simple when the users follow the instruction manual. This display terminal comes with front-panel hardware controls (Brightness, Contrast, H-POSI, H-SIZE, V-POSI, and V-SIZE) for adjusting the display's brightness, contrast, horizontal/vertical position, and the horizontal/vertical size of the screen. The 92-00560-00 interface has an auto-sensing input rating of 120 to 230 Volts AC (at 50 to 60 Hertz frequency) with 80 Watts of maximum power rating and a continuous current rating of 1.0 Amp. It comes with a standard serial port that can be configured for RS232, RS422, or 485-2 signal levels.