92-01127-01 | Eaton Cutler-Hammer Panelmate Panelmate 92**

92-01127-01

92-01127-01

Description: The 92-01127-01 PanelMate 3000 Color Operator Interface by Allen-Bradley is an operator interface device which allows the user to monitor, control, and troubleshoot a PLC or any soft-logic based machine. It offers a 10.4-inch, Thin Film-Transistor, flat panel display with 256 colors and an 8-state Powerlink mode. The 92-01127-01 also offers a 640 x 480 pixels (VGA) resolution, with a 350-nit ultra-bright display brightness, and it comes with a field replaceable backlight. It allows the user to enter information via it 5 x 3 cell TouchPanel, 0-9 numeric keys, and the 4 control buttons with a recessed membrane. read more...
Rated 4.9 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 92-01127-01

Add more parts to quote

Description: The 92-01127-01 PanelMate 3000 Color Operator Interface by Allen-Bradley is an operator interface device which allows the user to monitor, control, and troubleshoot a PLC or any soft-logic based machine. It offers a 10.4-inch, Thin Film-Transistor, flat panel display with 256 colors and an 8-state Powerlink mode. The 92-01127-01 also offers a 640 x 480 pixels (VGA) resolution, with a 350-nit ultra-bright display brightness, and it comes with a field replaceable backlight. It allows the user to enter information via it 5 x 3 cell TouchPanel, 0-9 numeric keys, and the 4 control buttons with a recessed membrane. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 92-01127-01.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 5 reviews

    Technical Specifications for 92-01127-01

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
ListingThese specifications were compiled by DO Supply and only for DO Supply's use.
Product Lifecycle Status*Discontinued/Obsolete

*The Eaton Cutler-Hammer 92-01127-01 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 92-01127-01 units instead of migration.

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Product Lifecycle Status*Discontinued/Obsolete

*The Eaton Cutler-Hammer 92-01127-01 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 92-01127-01 units instead of migration.

s

About 92-01127-01

The 92-01127-01 PanelMate 3000 Color Operator Interface by Allen-Bradley is an operator interface device which allows the user to monitor, control, and troubleshoot a PLC or any soft-logic based machine. It offers a 10.4-inch, Thin Film-Transistor, flat panel display with 256 colors and an 8-state Powerlink mode. The 92-01127-01 also offers a 640 x 480 pixels (VGA) resolution, with a 350-nit ultra-bright display brightness, and it comes with a field replaceable backlight. It allows the user to enter information via it 5 x 3 cell TouchPanel, 0-9 numeric keys, and the 4 control buttons with a recessed membrane. The 92-01127-01 comes with 2 DB9 standard serial ports configured for RS232, RS422, and RS485-2 base communication, with a transmission rate between 110 and 19,200 baud, and an optional communication interface module can be connected for enhanced network capability.

The 92-01127-01 requires a DC power supply, with 24V DC input voltage, and a maximum power consumption of 26W (30W with an optional communication interface module attached). It has a maximum power dissipation of 89 BTU/Hr when operational and it comes in a NEMA type 4, 4X, and 12-rated enclosure. The 92-01127-01’s operational temperature range is 0-50° C, at 20-90% non-condensing relative humidity, and it is stored at a temperature range of -20-70° C, at 20-95% non-condensing relative humidity. The 92-01127-01 is built to withstand an operational shock of 30G, and can also resist a 1G operational vibration at 10-500Hz. It has a maximum operational height of 10,000 feet above sea level, without de-rating, and it is UL, C-UL, CSA, and CE-certified. The 92-01127-01 weighs approximately 5.5Kg (12lb), and it has dimensions of 342.9mm x 330.2mm x 76.2mm (13.5in x 13in x 3in).



Technical Description of 92-01127-01

Eaton OPERATOR INTERFACE PANELMATE 3000 Cutler-Hammer

Repair Services for 92-01127-01

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01127-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 92-01127-01

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 92-01127-01

Resolutions For 92-01127-01

About

Technical Specifications for 92-01127-01

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Product Lifecycle Status*Discontinued/Obsolete

*The Eaton Cutler-Hammer 92-01127-01 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 92-01127-01 units instead of migration.

About 92-01127-01

The 92-01127-01 PanelMate 3000 Color Operator Interface by Allen-Bradley is an operator interface device which allows the user to monitor, control, and troubleshoot a PLC or any soft-logic based machine. It offers a 10.4-inch, Thin Film-Transistor, flat panel display with 256 colors and an 8-state Powerlink mode. The 92-01127-01 also offers a 640 x 480 pixels (VGA) resolution, with a 350-nit ultra-bright display brightness, and it comes with a field replaceable backlight. It allows the user to enter information via it 5 x 3 cell TouchPanel, 0-9 numeric keys, and the 4 control buttons with a recessed membrane. The 92-01127-01 comes with 2 DB9 standard serial ports configured for RS232, RS422, and RS485-2 base communication, with a transmission rate between 110 and 19,200 baud, and an optional communication interface module can be connected for enhanced network capability.

The 92-01127-01 requires a DC power supply, with 24V DC input voltage, and a maximum power consumption of 26W (30W with an optional communication interface module attached). It has a maximum power dissipation of 89 BTU/Hr when operational and it comes in a NEMA type 4, 4X, and 12-rated enclosure. The 92-01127-01’s operational temperature range is 0-50° C, at 20-90% non-condensing relative humidity, and it is stored at a temperature range of -20-70° C, at 20-95% non-condensing relative humidity. The 92-01127-01 is built to withstand an operational shock of 30G, and can also resist a 1G operational vibration at 10-500Hz. It has a maximum operational height of 10,000 feet above sea level, without de-rating, and it is UL, C-UL, CSA, and CE-certified. The 92-01127-01 weighs approximately 5.5Kg (12lb), and it has dimensions of 342.9mm x 330.2mm x 76.2mm (13.5in x 13in x 3in).



Technical Description of 92-01127-01

Eaton OPERATOR INTERFACE PANELMATE 3000 Cutler-Hammer
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01127-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01127-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF