The Eaton Cutler-Hammer 92-01419-01 operator interface terminal has a voltage range of 18 to 34 Volts DC and 11.5 Volts-Amps (VA) of power. The PanelMate 92** terminal is available with both color and grayscale graphics. It has serial ports known as Serial Port 1 and Serial Port 2 with RJ-11 and RJ-45 connections for RS-485, RS-422, and RS-232 communication. This operator interface terminal is made to replace gauges, pushbuttons, lights, and traditional hardwired control devices. Manufacturing system designers and machine builders prefer PanelMate terminals like this one because it is cost-effective, fully integrated, and easy to use. When selecting a PanelMate terminal, the users need to consider 3 criteria. These criteria are the connectivity (such as the software utilities, optional cables, and hardware interfaces), the operator interface (an operator station or an online unit), and the configuration software that is PC-based software and that is used to configure and move applications on the operator interface terminal.

The Eaton Cutler-Hammer 92-01419-01 PanelMate92** video control terminal requires testing before it can be installed in any industrial enclosure. The test procedure involves connecting the terminal to a power source rated at 24 Volts DC, powering up the video control terminal, and lastly, carrying out the system diagnostics. The Eaton Cutler-Hammer 92-01419-01 PanelMate video control panel terminal has an operating temperature range from 0 to 40 degrees Celsius for the color graphics models and one from 0 to 50 degrees Celsius for the grayscale models. In addition, the terminal has a storage temperature range between -20 and 60 degrees Celsius. The relative non-condensing humidity range that the PanelMate 92** terminal can tolerate is between 20% and 90% for color graphics models and 20% and 80% for grayscale graphics models. If the terminal is mounted correctly, it has a NEMA rating of NEMA 4X.