92-01561-01 | Eaton Cutler-Hammer Panelmate Panelmate 92**

92-01561-01

92-01561-01

Description:

The Eaton Cutler-Hammer 92-01561-01 operator interface belongs to the Panelmate 92** series. The device has a voltage rating of 120/230 Volts AC and a current rating of 0.8 Amps.

Rated 4.9 with 9 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 92-01561-01

Add more parts to quote

Description:

The Eaton Cutler-Hammer 92-01561-01 operator interface belongs to the Panelmate 92** series. The device has a voltage rating of 120/230 Volts AC and a current rating of 0.8 Amps.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 92-01561-01.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 9 reviews

    Technical Specifications for 92-01561-01

BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01561-01
BrandEaton/Cutler-Hammer
Product LinePanelMate
Product TypeOperator Interface
Bulletin92
Power Input90-132V AC,180-264V AC
Frequency47-63 Hz
Shock10 G at 10 ms
Operating Altitude0-10,000 ft.
Operating Temperature0-50 degrees Celsius
Power Consumption100 W (140 VA)
BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01561-01
BrandEaton/Cutler-Hammer
Product LinePanelMate
Product TypeOperator Interface
Bulletin92
Power Input90-132V AC,180-264V AC
Frequency47-63 Hz
Shock10 G at 10 ms
Operating Altitude0-10,000 ft.
Operating Temperature0-50 degrees Celsius
Power Consumption100 W (140 VA)
s

About 92-01561-01

The 92-01561-01 operator interface is a display panel that is manufactured as a part of the Panelmate 92** series. It has a voltage rating of 120/230 Volts with a current rating of 0.8 Amps and it weighs approximately 10 pounds. Other specifications of this operator interface include a power rating of 55 Watts and a frequency of 50 to 60 Hertz. The 92-01561-01 operator interface and the entire Panelmate 92** product line are designed to be ideal electronic operator interfaces. The Panelmate 92** series provides a comprehensive range of rugged operator interface products like the 92-01561-01 operator interface with exclusive features, options, and designs, and a remarkable display image quality. Additionally, these products offer cost-effective solutions which perfectly match any application and any budget.



 



The design of the Eaton Cutler-Hammer 92-01561-01 operator interface and other Panelmate 92** operator interface products makes it even easier to access to a wide range of PLCs and other devices through multiple protocols and communication networks. As with the Panelmate 92** operator interface products, Eaton products in general also communicate with devices including MVX drives, ELCs, IT MCCs, and SVX drives. These devices are well-matched non-Eaton devices that use standard interfaces such as the OPC. While standardizing the OPC interface to deliver integral OPC servers and communication, the Panelmate 92** products will work perfectly with whichever software or hardware the users have chosen to help keep the applications running smoothly. When it is time to upgrade the Panelmate 92** products to the latest models, choose any software tools available to help convert the applications that already exist, which saves money and time.



Repair Services for 92-01561-01

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01561-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 92-01561-01

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 92-01561-01

Resolutions For 92-01561-01

About

Technical Specifications for 92-01561-01

BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01561-01
BrandEaton/Cutler-Hammer
Product LinePanelMate
Product TypeOperator Interface
Bulletin92
Power Input90-132V AC,180-264V AC
Frequency47-63 Hz
Shock10 G at 10 ms
Operating Altitude0-10,000 ft.
Operating Temperature0-50 degrees Celsius
Power Consumption100 W (140 VA)
BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01561-01
BrandEaton/Cutler-Hammer
Product LinePanelMate
Product TypeOperator Interface
Bulletin92
Power Input90-132V AC,180-264V AC
Frequency47-63 Hz
Shock10 G at 10 ms
Operating Altitude0-10,000 ft.
Operating Temperature0-50 degrees Celsius
Power Consumption100 W (140 VA)

About 92-01561-01

The 92-01561-01 operator interface is a display panel that is manufactured as a part of the Panelmate 92** series. It has a voltage rating of 120/230 Volts with a current rating of 0.8 Amps and it weighs approximately 10 pounds. Other specifications of this operator interface include a power rating of 55 Watts and a frequency of 50 to 60 Hertz. The 92-01561-01 operator interface and the entire Panelmate 92** product line are designed to be ideal electronic operator interfaces. The Panelmate 92** series provides a comprehensive range of rugged operator interface products like the 92-01561-01 operator interface with exclusive features, options, and designs, and a remarkable display image quality. Additionally, these products offer cost-effective solutions which perfectly match any application and any budget.



 



The design of the Eaton Cutler-Hammer 92-01561-01 operator interface and other Panelmate 92** operator interface products makes it even easier to access to a wide range of PLCs and other devices through multiple protocols and communication networks. As with the Panelmate 92** operator interface products, Eaton products in general also communicate with devices including MVX drives, ELCs, IT MCCs, and SVX drives. These devices are well-matched non-Eaton devices that use standard interfaces such as the OPC. While standardizing the OPC interface to deliver integral OPC servers and communication, the Panelmate 92** products will work perfectly with whichever software or hardware the users have chosen to help keep the applications running smoothly. When it is time to upgrade the Panelmate 92** products to the latest models, choose any software tools available to help convert the applications that already exist, which saves money and time.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01561-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01561-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF