92-01684-00 | Eaton Cutler-Hammer Panelmate Panelmate 92**

92-01684-00

92-01684-00

Description:

The Eaton Cutler-Hammer Panelmate 92** 92-01684-00 terminal is a operator control terminal. The 92-01684-00 terminal is powered by a Motorola 68340 microcontroller.

Rated 4.6 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 92-01684-00

Add more parts to quote

Description:

The Eaton Cutler-Hammer Panelmate 92** 92-01684-00 terminal is a operator control terminal. The 92-01684-00 terminal is powered by a Motorola 68340 microcontroller.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 92-01684-00.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 14 reviews

    Technical Specifications for 92-01684-00

BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01684-00
Product TypeOperator terminal
MicrocontrollerMotorola 68340
Display Type Monochrome LCD
Display Resolution 320 x 240
Serial Port1
Baud Rate110 to 19200 baud
Input Voltage 24 Volts DC
Maximum Input Current0.5 Amps
Weight4 pounds
Dimensions 9.0 x 1.92 x 7.8 inches
BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01684-00
Product TypeOperator terminal
MicrocontrollerMotorola 68340
Display Type Monochrome LCD
Display Resolution 320 x 240
Serial Port1
Baud Rate110 to 19200 baud
Input Voltage 24 Volts DC
Maximum Input Current0.5 Amps
Weight4 pounds
Dimensions 9.0 x 1.92 x 7.8 inches
s

About 92-01684-00

The 92-01684-00 terminal is an Eaton Cutler-Hammer Panelmate 92** series industrial operator interface terminal. The 92-01684-00 interface terminal is designed for deployment in industrial settings where it can be used to replace legacy control systems that use individual devices such as lamps and pushbuttons which are hard-wired to the I/O points. The 92-01684-00 interface terminal can perform all the control and monitoring functions performed by legacy systems and it can also perform numerous additional functions. This electronic industrial interface terminal usually occupies less space than older control systems, it is flexible and customizable, and it can be upgraded through enhanced software. The 92-01684-00 interface terminal has a monochrome LCD screen which supports a VGA (320 x 240) resolution. The terminal is based on a 16 Megahertz Motorola 68340 microcontroller. A serial port is available on the unit and it can be configured for RS-232 or RS-422 communication depending upon user requirements.



 



The Baud rate for the serial port is selectable, and the minimum baud rate setting is 110 baud while the maximum baud rate setting is 19.2 kilobaud. The rated nominal input voltage is 24 Volts DC and the maximum power consumption rating is 12 Watts. Polarity reversal will not damage the 92-01684-00 interface terminal. The rated inrush current is 35 Amps which can last for up to 15 microseconds. The recommended minimum wire size for DC power connections is 0.82 millimeters squared. The approximate weight of the 92-01684-00 interface terminal is 4 pounds. The unit dimensions are approximately 9.0 x 1.92 x 7.8 inches. The recommended torque for the number 6-32 nuts used to mount the system is 5 pounds on an inch. Eaton Cutler-Hammer recommends using a cutout measuring 6.63 x 7.7 inches for the installation of the unit.



Repair Services for 92-01684-00

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01684-00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 92-01684-00

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 92-01684-00

Resolutions For 92-01684-00

About

Technical Specifications for 92-01684-00

BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01684-00
Product TypeOperator terminal
MicrocontrollerMotorola 68340
Display Type Monochrome LCD
Display Resolution 320 x 240
Serial Port1
Baud Rate110 to 19200 baud
Input Voltage 24 Volts DC
Maximum Input Current0.5 Amps
Weight4 pounds
Dimensions 9.0 x 1.92 x 7.8 inches
BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01684-00
Product TypeOperator terminal
MicrocontrollerMotorola 68340
Display Type Monochrome LCD
Display Resolution 320 x 240
Serial Port1
Baud Rate110 to 19200 baud
Input Voltage 24 Volts DC
Maximum Input Current0.5 Amps
Weight4 pounds
Dimensions 9.0 x 1.92 x 7.8 inches

About 92-01684-00

The 92-01684-00 terminal is an Eaton Cutler-Hammer Panelmate 92** series industrial operator interface terminal. The 92-01684-00 interface terminal is designed for deployment in industrial settings where it can be used to replace legacy control systems that use individual devices such as lamps and pushbuttons which are hard-wired to the I/O points. The 92-01684-00 interface terminal can perform all the control and monitoring functions performed by legacy systems and it can also perform numerous additional functions. This electronic industrial interface terminal usually occupies less space than older control systems, it is flexible and customizable, and it can be upgraded through enhanced software. The 92-01684-00 interface terminal has a monochrome LCD screen which supports a VGA (320 x 240) resolution. The terminal is based on a 16 Megahertz Motorola 68340 microcontroller. A serial port is available on the unit and it can be configured for RS-232 or RS-422 communication depending upon user requirements.



 



The Baud rate for the serial port is selectable, and the minimum baud rate setting is 110 baud while the maximum baud rate setting is 19.2 kilobaud. The rated nominal input voltage is 24 Volts DC and the maximum power consumption rating is 12 Watts. Polarity reversal will not damage the 92-01684-00 interface terminal. The rated inrush current is 35 Amps which can last for up to 15 microseconds. The recommended minimum wire size for DC power connections is 0.82 millimeters squared. The approximate weight of the 92-01684-00 interface terminal is 4 pounds. The unit dimensions are approximately 9.0 x 1.92 x 7.8 inches. The recommended torque for the number 6-32 nuts used to mount the system is 5 pounds on an inch. Eaton Cutler-Hammer recommends using a cutout measuring 6.63 x 7.7 inches for the installation of the unit.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01684-00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01684-00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF