92-01702-01 | Eaton Cutler-Hammer Panelmate Panelmate 92**

92-01702-01

92-01702-01

Description:

The Eaton Cutler-Hammer Panelmate 92** 92-01702-01 terminal is a Panelmate 92** series operator interface terminal. The 92-01702-01 interface terminal comes with a touch-enabled display.

Rated 4.5 with 18 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 92-01702-01

Add more parts to quote

Description:

The Eaton Cutler-Hammer Panelmate 92** 92-01702-01 terminal is a Panelmate 92** series operator interface terminal. The 92-01702-01 interface terminal comes with a touch-enabled display.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 92-01702-01.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 18 reviews

    Technical Specifications for 92-01702-01

BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01702-01
Product TypeOperator terminal
TouchscreenYes
Display Resolution640 x 480
Serial Ports2
Message Capacity5000, 100-page messages
Optional DH-485 ModuleYes
ApprovalsCSA, CE, UL, UL / CSA
BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01702-01
Product TypeOperator terminal
TouchscreenYes
Display Resolution640 x 480
Serial Ports2
Message Capacity5000, 100-page messages
Optional DH-485 ModuleYes
ApprovalsCSA, CE, UL, UL / CSA
s

About 92-01702-01

The Panelmate 92** 92-01702-01 interface terminal is an operator interface terminal designed for industrial control applications. In addition to the terminal itself, the shipment from the manufacturer also contains a cutout drawing. The Panelmate 92** terminals are available in 2 versions: as terminals with touchscreens and terminal with touchpanels. The 92-01702-01 interface terminal comes with a touchscreen display which supports a 640 x 480 resolution. The operators can select graphics images or templates on the touchscreen. Control actions can be performed after a template is selected. The 92-01702-01 interface terminal is approved for use in Type 12, 4X, and 4 installations. The system firmware is stored in the NVRAM and it can be upgraded to enable new and enhanced features to be used. Integrated communication ports include 2 serial ports which support RS-232 and RS-422 communication. The serial ports are optically isolated. Optional communication modules are also available and they can be ordered according to user application requirements.



 



The 92-01702-01 interface terminal is able to store 5000, 100-page messages. The 92-01702-01 interface terminal supports DH-485 communication through an optional module. Both ends of a DC-485 network must be terminated. The Panelmate 92** terminals come with integrated termination resistors which can be activated if required. The maximum segment length for a DH-485 network is 4000 feet.  The cable type recommended for the DH-485 networks is Belden 9842 cable. Several accessories can be ordered with Panelmate 92** units. These include a 15-foot cable for RS-232 serial communication which can be used for uploads and downloads from a PC, converter connectors for converting an RJ-11 to 9-pin D-shell connector, mounting plates, and collars and overlay kits. The 92-01702-01 interface terminal meets requirements of the CSA, CE, UL, and UL / CSA standards.



Repair Services for 92-01702-01

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01702-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 92-01702-01

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 92-01702-01

Resolutions For 92-01702-01

About

Technical Specifications for 92-01702-01

BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01702-01
Product TypeOperator terminal
TouchscreenYes
Display Resolution640 x 480
Serial Ports2
Message Capacity5000, 100-page messages
Optional DH-485 ModuleYes
ApprovalsCSA, CE, UL, UL / CSA
BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01702-01
Product TypeOperator terminal
TouchscreenYes
Display Resolution640 x 480
Serial Ports2
Message Capacity5000, 100-page messages
Optional DH-485 ModuleYes
ApprovalsCSA, CE, UL, UL / CSA

About 92-01702-01

The Panelmate 92** 92-01702-01 interface terminal is an operator interface terminal designed for industrial control applications. In addition to the terminal itself, the shipment from the manufacturer also contains a cutout drawing. The Panelmate 92** terminals are available in 2 versions: as terminals with touchscreens and terminal with touchpanels. The 92-01702-01 interface terminal comes with a touchscreen display which supports a 640 x 480 resolution. The operators can select graphics images or templates on the touchscreen. Control actions can be performed after a template is selected. The 92-01702-01 interface terminal is approved for use in Type 12, 4X, and 4 installations. The system firmware is stored in the NVRAM and it can be upgraded to enable new and enhanced features to be used. Integrated communication ports include 2 serial ports which support RS-232 and RS-422 communication. The serial ports are optically isolated. Optional communication modules are also available and they can be ordered according to user application requirements.



 



The 92-01702-01 interface terminal is able to store 5000, 100-page messages. The 92-01702-01 interface terminal supports DH-485 communication through an optional module. Both ends of a DC-485 network must be terminated. The Panelmate 92** terminals come with integrated termination resistors which can be activated if required. The maximum segment length for a DH-485 network is 4000 feet.  The cable type recommended for the DH-485 networks is Belden 9842 cable. Several accessories can be ordered with Panelmate 92** units. These include a 15-foot cable for RS-232 serial communication which can be used for uploads and downloads from a PC, converter connectors for converting an RJ-11 to 9-pin D-shell connector, mounting plates, and collars and overlay kits. The 92-01702-01 interface terminal meets requirements of the CSA, CE, UL, and UL / CSA standards.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01702-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01702-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF