92-01809-00 | Eaton Cutler-Hammer Panelmate Panelmate 92**

×

92-01809-00

92-01809-00

Description:

The Eaton Cutler-Hammer 92-01809-00 PanelMate 92** operator interface is a simple to install, easy to maintain, and powerful human-machine interface that is adaptable for a wide variety of industrial applications. Attachable connectors at the back of the unit allow it to be installed quickly, and the serial ports serve as network connection points and data exchange interfaces for downloading user-configured control algorithms to the interface.

Rated 4.8 with 16 reviews
About | Product Specifications

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 92-01809-00

Add more parts to quote

Description:

The Eaton Cutler-Hammer 92-01809-00 PanelMate 92** operator interface is a simple to install, easy to maintain, and powerful human-machine interface that is adaptable for a wide variety of industrial applications. Attachable connectors at the back of the unit allow it to be installed quickly, and the serial ports serve as network connection points and data exchange interfaces for downloading user-configured control algorithms to the interface.


About | Products Specs

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 92-01809-00.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 16 reviews

    Technical Specifications for 92-01809-00

BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01809-00
Type of ComponentOperator Interface
Operating Voltage24 VDC
Current Rating 0.6 Amps
Power Rating 14 Watts
CPU16 bit microprocessor running at 16 MHz
Memory 1 MB flash memory / 2 MB DRAM
Serial Port Rate110 to 19,200 Baud
Weight5 Pounds
Equipment Heat41 BTU/hr
Peak Inrush Current35A
BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01809-00
Type of ComponentOperator Interface
Operating Voltage24 VDC
Current Rating 0.6 Amps
Power Rating 14 Watts
CPU16 bit microprocessor running at 16 MHz
Memory 1 MB flash memory / 2 MB DRAM
Serial Port Rate110 to 19,200 Baud
Weight5 Pounds
Equipment Heat41 BTU/hr
Peak Inrush Current35A
s

About 92-01809-00

The Eaton Cutler-Hammer 92-01809-00 interface is a PanelMate 92** operator interface device that is also known as an HMI or Human-Machine Interface which allows for the control of several variables from industrial process from a single, integrated control platform. The power connections to the Eaton Cutler-Hammer 92-01809-00 PanelMate 92** operator interface are made with screw terminals in a plastic connector placed at the rear of the unit where the control connections are also located. Configuration is done through the Eaton Cutler-Hammer proprietary software tools and this software can be loaded into the 92-01809-00 operator interface by using its serial ports and a data transfer cable that connects the interface to a Windows PC that is sold separately. The installation process of the device is made simple by physically mounting the interface onto a panel, tightening the mounting screws that are included in the package, making the power and control connections, and switching the external 24 Volts DC power supply on.



 



The Eaton Cutler-Hammer 92-01809-00 PanelMate 92** operator interface comes from the factory with a 16-bit microprocessor that runs at 16 MHz, 1 MB of flash memory, and 2 MB of DRAM. It also features 2 serial ports with a transmission rate that can vary between 110 and 19,200 Bauds, and it is compatible with most serial transmission protocols such as the RS-232 or RS-485 protocols. The manufacturer recommends adapting climate control systems inside enclosures where temperatures can go above 50 degrees Celsius in order to guarantee the stable operation of the Eaton Cutler-Hammer 92-01809-00 PanelMate 92** operator interface. Maintenance routines should also be implemented to extend the device’s operating lifespan, and maintenance includes the external cleaning of the screen and keyboard with non-abrasive liquids, cleaning the ventilation section of the case, and dusting the electronics to avoid dirt accumulation (always perform maintenance with the power supply off in order to prevent electrical discharges).



Repair Services for 92-01809-00

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01809-00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 92-01809-00

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 92-01809-00

Resolutions For 92-01809-00

About

Technical Specifications for 92-01809-00

BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01809-00
Type of ComponentOperator Interface
Operating Voltage24 VDC
Current Rating 0.6 Amps
Power Rating 14 Watts
CPU16 bit microprocessor running at 16 MHz
Memory 1 MB flash memory / 2 MB DRAM
Serial Port Rate110 to 19,200 Baud
Weight5 Pounds
Equipment Heat41 BTU/hr
Peak Inrush Current35A
BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01809-00
Type of ComponentOperator Interface
Operating Voltage24 VDC
Current Rating 0.6 Amps
Power Rating 14 Watts
CPU16 bit microprocessor running at 16 MHz
Memory 1 MB flash memory / 2 MB DRAM
Serial Port Rate110 to 19,200 Baud
Weight5 Pounds
Equipment Heat41 BTU/hr
Peak Inrush Current35A

About 92-01809-00

The Eaton Cutler-Hammer 92-01809-00 interface is a PanelMate 92** operator interface device that is also known as an HMI or Human-Machine Interface which allows for the control of several variables from industrial process from a single, integrated control platform. The power connections to the Eaton Cutler-Hammer 92-01809-00 PanelMate 92** operator interface are made with screw terminals in a plastic connector placed at the rear of the unit where the control connections are also located. Configuration is done through the Eaton Cutler-Hammer proprietary software tools and this software can be loaded into the 92-01809-00 operator interface by using its serial ports and a data transfer cable that connects the interface to a Windows PC that is sold separately. The installation process of the device is made simple by physically mounting the interface onto a panel, tightening the mounting screws that are included in the package, making the power and control connections, and switching the external 24 Volts DC power supply on.



 



The Eaton Cutler-Hammer 92-01809-00 PanelMate 92** operator interface comes from the factory with a 16-bit microprocessor that runs at 16 MHz, 1 MB of flash memory, and 2 MB of DRAM. It also features 2 serial ports with a transmission rate that can vary between 110 and 19,200 Bauds, and it is compatible with most serial transmission protocols such as the RS-232 or RS-485 protocols. The manufacturer recommends adapting climate control systems inside enclosures where temperatures can go above 50 degrees Celsius in order to guarantee the stable operation of the Eaton Cutler-Hammer 92-01809-00 PanelMate 92** operator interface. Maintenance routines should also be implemented to extend the device’s operating lifespan, and maintenance includes the external cleaning of the screen and keyboard with non-abrasive liquids, cleaning the ventilation section of the case, and dusting the electronics to avoid dirt accumulation (always perform maintenance with the power supply off in order to prevent electrical discharges).



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01809-00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01809-00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF
92-01809-00 PDF