92-01865-00 | Eaton Cutler-Hammer Panelmate Panelmate 92**

92-01865-00

92-01865-00

Description:

The Eaton Cutler-Hammer 92-01865-00 panel is a Panelmate 92** series control panel. It has the COM1: RS-232 and COM2: RS-485/RS-422 communication interfaces.

Rated 5 with 9 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 92-01865-00

Add more parts to quote

Description:

The Eaton Cutler-Hammer 92-01865-00 panel is a Panelmate 92** series control panel. It has the COM1: RS-232 and COM2: RS-485/RS-422 communication interfaces.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 92-01865-00.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 9 reviews

    Technical Specifications for 92-01865-00

BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01865-00
Model1585x
Power Series1500
Communication Interfaces COM1: RS-232 and COM2: RS-485/RS-422
Electrostatic Discharge ImmunityEN61000-4-2/1995
Radiated Immunity EN61000-4-3/1995
Electrical Fast TransientEN61000-4-4/1995
Radiated EmissionsCISPR22, Class A
Waterproof Class of Front PanelUL Type 4X Outdoor Rated
Agency CertificationsUL 508, cUL (CSA C22.2 No. 14), CE (Low Voltage Directive)
Transportation and Storage Temperature-4 to 140 degrees Fahrenheit
Operating Temperature32 to 122 degrees Fahrenheit
Cooling MethodNatural Air Cooling
BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01865-00
Model1585x
Power Series1500
Communication Interfaces COM1: RS-232 and COM2: RS-485/RS-422
Electrostatic Discharge ImmunityEN61000-4-2/1995
Radiated Immunity EN61000-4-3/1995
Electrical Fast TransientEN61000-4-4/1995
Radiated EmissionsCISPR22, Class A
Waterproof Class of Front PanelUL Type 4X Outdoor Rated
Agency CertificationsUL 508, cUL (CSA C22.2 No. 14), CE (Low Voltage Directive)
Transportation and Storage Temperature-4 to 140 degrees Fahrenheit
Operating Temperature32 to 122 degrees Fahrenheit
Cooling MethodNatural Air Cooling
s

About 92-01865-00

The Eaton Cutler-Hammer 92-01865-00 Panelmate 92** control panel needs to be tested before it is installed in an industrial enclosure and used. When the video system in the control panel produces an alarm tone during the test, that means that the panel has experienced a failure or a fatal error. If the panel generates a 100-Hertz tone within a duration of 250 milliseconds, this indicates the 92-01865-00 Panelmate 92** control panel has passed the test. However, if an 800-Hertz tone is generated within a duration of 500 milliseconds, this indicates that the Panelmate unit has failed the test. In both tests, there is a pause of 3 seconds after every tone sequence. The tests are conducted to check the status of the real-time clock battery, the real-time clock (timing), Serial Port 1, Serial Port 2, DRAM, frame buffer SRAM, character cell SRAM, and the watchdog timer.



 



When ordering the PLC cables for the Eaton Cutler-Hammer 92-01865-00 Panelmate 92** unit, use these catalog numbers: TI32 for the PLC direct and TI 405 Series cable (RS232C) and TI34 for the PLC Direct and TI 435 Series cable (RS422). The 92-01865-00 control panel conforms to several international standards and approvals. These include the Electrical Fast Transient rating as per the EN61000-4-4/1995 standards, the Electrostatic Discharge Immunity rating as per the EN61000-4-2/1995 standards, the Radiated Emission rating as per the CISPR22- Class A standards, and Radiated Immunity rating as per the EN61000-4-3/1995 standards. It also has agency certifications such as the CE (Low Voltage Directive), UL 508, cUL, and CSA (C22.2 No. 14) certifications. The Panelmate 92** control panel has a transportation and storage temperature range of -4 to +140 degrees Fahrenheit and an operating temperature range of 32 to 122 degrees Fahrenheit. It uses a natural air cooling method and it has a tolerable relative humidity range of 20 to 90%.



Repair Services for 92-01865-00

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01865-00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 92-01865-00

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 92-01865-00

Resolutions For 92-01865-00

About

Technical Specifications for 92-01865-00

BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01865-00
Model1585x
Power Series1500
Communication Interfaces COM1: RS-232 and COM2: RS-485/RS-422
Electrostatic Discharge ImmunityEN61000-4-2/1995
Radiated Immunity EN61000-4-3/1995
Electrical Fast TransientEN61000-4-4/1995
Radiated EmissionsCISPR22, Class A
Waterproof Class of Front PanelUL Type 4X Outdoor Rated
Agency CertificationsUL 508, cUL (CSA C22.2 No. 14), CE (Low Voltage Directive)
Transportation and Storage Temperature-4 to 140 degrees Fahrenheit
Operating Temperature32 to 122 degrees Fahrenheit
Cooling MethodNatural Air Cooling
BrandEaton Cutler-Hammer
SeriesPanelmate 92**
Part Number92-01865-00
Model1585x
Power Series1500
Communication Interfaces COM1: RS-232 and COM2: RS-485/RS-422
Electrostatic Discharge ImmunityEN61000-4-2/1995
Radiated Immunity EN61000-4-3/1995
Electrical Fast TransientEN61000-4-4/1995
Radiated EmissionsCISPR22, Class A
Waterproof Class of Front PanelUL Type 4X Outdoor Rated
Agency CertificationsUL 508, cUL (CSA C22.2 No. 14), CE (Low Voltage Directive)
Transportation and Storage Temperature-4 to 140 degrees Fahrenheit
Operating Temperature32 to 122 degrees Fahrenheit
Cooling MethodNatural Air Cooling

About 92-01865-00

The Eaton Cutler-Hammer 92-01865-00 Panelmate 92** control panel needs to be tested before it is installed in an industrial enclosure and used. When the video system in the control panel produces an alarm tone during the test, that means that the panel has experienced a failure or a fatal error. If the panel generates a 100-Hertz tone within a duration of 250 milliseconds, this indicates the 92-01865-00 Panelmate 92** control panel has passed the test. However, if an 800-Hertz tone is generated within a duration of 500 milliseconds, this indicates that the Panelmate unit has failed the test. In both tests, there is a pause of 3 seconds after every tone sequence. The tests are conducted to check the status of the real-time clock battery, the real-time clock (timing), Serial Port 1, Serial Port 2, DRAM, frame buffer SRAM, character cell SRAM, and the watchdog timer.



 



When ordering the PLC cables for the Eaton Cutler-Hammer 92-01865-00 Panelmate 92** unit, use these catalog numbers: TI32 for the PLC direct and TI 405 Series cable (RS232C) and TI34 for the PLC Direct and TI 435 Series cable (RS422). The 92-01865-00 control panel conforms to several international standards and approvals. These include the Electrical Fast Transient rating as per the EN61000-4-4/1995 standards, the Electrostatic Discharge Immunity rating as per the EN61000-4-2/1995 standards, the Radiated Emission rating as per the CISPR22- Class A standards, and Radiated Immunity rating as per the EN61000-4-3/1995 standards. It also has agency certifications such as the CE (Low Voltage Directive), UL 508, cUL, and CSA (C22.2 No. 14) certifications. The Panelmate 92** control panel has a transportation and storage temperature range of -4 to +140 degrees Fahrenheit and an operating temperature range of 32 to 122 degrees Fahrenheit. It uses a natural air cooling method and it has a tolerable relative humidity range of 20 to 90%.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01865-00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 92-01865-00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF