The Eaton Cutler-Hammer 92-01872-02 terminal Panelmate 92** operator interface terminal has a grayscale LCD with a 7.4-inch display screen. The unit has DB-9 serial ports for RS485/422/232 communication and an external rotary switch for the RS485/422 serial terminations. It has 2 Amps of inductive load current at 240 Volts AC and 2 Amps of inductive load current at 24 Volts DC. The Panelmate 92** terminal has a nominal voltage rating of 24 Volts DC, an electric current rating of 1.1 Amps, and a power rating of 23 Watts. It is a DC-powered unit. The 92-01872-02 Panelmate 92** operator interface terminal requires executive firmware that is version 4.10 or later, and the temperature rating is T4 code. The unit has various certifications, including the CSA Class I Div 2, Groups A, B, C and D, UL Class I Div 2, CSA, cUL, UL, and CE certifications.

The 92-01872-02 Panelmate 92** operator interface terminal is capable of running 2 different kinds of communications software concurrently. For example, the users can interact with the Allen-Bradely Remote I/O network by using the AcceleratI/On interface and, at the same time, communicate by using the Modbus serial protocol, Allen-Bradley serial protocol, or other driver serial protocols via any of the 2 serial ports. The unit can support up to 5000 messages and 100 pages. The recommended transfer cable for 92-01872-02 terminal is the 0518 cable. It has both touchpanel and touchscreen input options and the grayscale LCD shows gray graphics in 256 shades. The unit has an audio output with an 8 Ohms speaker and a security keyswitch input. During power-up, the 92-01872-02 terminal has an in-rush current limit not exceeding 5 Amps.