The 92-01938-02 interface is an operator interface and display that has been manufacturd by Eaton Cutler-Hammer. This specific interface panel comes with a monochrome touchscreen and it belongs to the Eaton PanelMate 92** interface panel series. This operator interface can be mounted on an operator panel as its mounting base, and it requires a power source rated at 24 Volts DC to operate. The Eaton Cutler-Hammer 92-01938-02 operator interface can be operated with bare fingers but it is recommended to use a stylus instead or at least gloved hands to avoid creating any kind of scratches or causing damages to the screen. It is also recommended to avoid installing the interface anywhere that experiences direct sunlight since ultraviolet rays might cause damages to the screen and shorten its operating life.

The Eaton Cutler-Hammer 92-01938-02 operator interface operates with a power supply voltage rating of 24 Volts DC and a current rating of 1.1 Amps. It is important to recall that the power supply voltage needs to be exact, otherwise it can cause damages to the internal parts of the equipment or the equipment will not be able to start up and operate. The Eaton Cutler-Hammer 92-01938-02 operator interface requires a specific power consumption rating of 23 Watts. It also comes with a relay that can operate with inductive loads of 2 Amps at 240 Volts AC and 28 Volts DC voltage. The environment that this panel can be installed in and used in safely must be a Type 4, 4x, or 12 environment. It must also be a clean environment without any corrosive materials and microparticles that might enter the interface and cause damages.