DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Eaton Cutler-Hammer 92-01939-01 operator interface is part of the PanelMate 92** range. It is suitable for its use in environments with the 4, 4X, and 12 environmental ratings.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 92-01939-01. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Eaton Cutler-Hammer |
Series | Panelmate 92** |
Part Number | 92-01939-01 |
Type | Operator Interface |
Model | 1775T PMPP 1700 |
Power | 24 VDC |
Ampere Rating | 1,1, Amps |
Power Consumption | 23 Watts |
Relay | 2 Amps |
Inductive Loads | 0-240 VAC and 28 VDC |
Display | Yes |
Audio Input | Yes |
Keypad | Yes |
Brand | Eaton Cutler-Hammer |
Series | Panelmate 92** |
Part Number | 92-01939-01 |
Type | Operator Interface |
Model | 1775T PMPP 1700 |
Power | 24 VDC |
Ampere Rating | 1,1, Amps |
Power Consumption | 23 Watts |
Relay | 2 Amps |
Inductive Loads | 0-240 VAC and 28 VDC |
Display | Yes |
Audio Input | Yes |
Keypad | Yes |
The 92-01939-01 interface is an operator interface with a physical keypad that has been designed and manufactured by Eaton Cutler-Hammer. This specific interface includes both a touch display and a physical keypad that both make data entry and application variable check-up easy. This operator interface can be installed in any operator interface as long as all the required physical conditions for the installation environment are met. These conditions include the temperature level and the moisture level that must be fully compatible with 4, 4x, and 12 environmental rating requirements. The screen of the operator interface must not be subjected to direct sunlight or its lifespan may be diminished.
The Eaton Cutler-Hammer 92-01939-01 operator interface requires a power source rated at 24 Volts DC to start operating. This interface includes a variety of ports that can be used to attach it to other devices. The Eaton Cutler-Hammer 92-01939-01 operator interface with a physical keypad comes with a relay device that enables it to operate at 0 to 240 Volts AC and 28 Volts DC with inductive loads of up to 2 Amps of current for both voltage ratings. The Eaton Cutler-Hammer 92-01939-01 operator interface also operates with a current rating of 1.1 Amps and its power consumption rating is 23 Watts. It is recommended to use this operator interface with gloved hands or at least with extremely clean hands to avoid the accumulation of dirt and moisture on the buttons and to preserve the operating life of the keypad for an extended period.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 92-01939-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Eaton Cutler-Hammer |
Series | Panelmate 92** |
Part Number | 92-01939-01 |
Type | Operator Interface |
Model | 1775T PMPP 1700 |
Power | 24 VDC |
Ampere Rating | 1,1, Amps |
Power Consumption | 23 Watts |
Relay | 2 Amps |
Inductive Loads | 0-240 VAC and 28 VDC |
Display | Yes |
Audio Input | Yes |
Keypad | Yes |
Brand | Eaton Cutler-Hammer |
Series | Panelmate 92** |
Part Number | 92-01939-01 |
Type | Operator Interface |
Model | 1775T PMPP 1700 |
Power | 24 VDC |
Ampere Rating | 1,1, Amps |
Power Consumption | 23 Watts |
Relay | 2 Amps |
Inductive Loads | 0-240 VAC and 28 VDC |
Display | Yes |
Audio Input | Yes |
Keypad | Yes |
The 92-01939-01 interface is an operator interface with a physical keypad that has been designed and manufactured by Eaton Cutler-Hammer. This specific interface includes both a touch display and a physical keypad that both make data entry and application variable check-up easy. This operator interface can be installed in any operator interface as long as all the required physical conditions for the installation environment are met. These conditions include the temperature level and the moisture level that must be fully compatible with 4, 4x, and 12 environmental rating requirements. The screen of the operator interface must not be subjected to direct sunlight or its lifespan may be diminished.
The Eaton Cutler-Hammer 92-01939-01 operator interface requires a power source rated at 24 Volts DC to start operating. This interface includes a variety of ports that can be used to attach it to other devices. The Eaton Cutler-Hammer 92-01939-01 operator interface with a physical keypad comes with a relay device that enables it to operate at 0 to 240 Volts AC and 28 Volts DC with inductive loads of up to 2 Amps of current for both voltage ratings. The Eaton Cutler-Hammer 92-01939-01 operator interface also operates with a current rating of 1.1 Amps and its power consumption rating is 23 Watts. It is recommended to use this operator interface with gloved hands or at least with extremely clean hands to avoid the accumulation of dirt and moisture on the buttons and to preserve the operating life of the keypad for an extended period.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 92-01939-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 92-01939-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.