The Eaton Cutler-Hammer 92-01940-03 PanelMate 92** operator interface is available with a 7.7-inch color dual scan touchscreen (DSTN) display with a complete video graphics array resolution and 256 colors or shades in the graphics. It comes with a touchscreen for operator input and it can be easily mounted in a 4-inch-deep industrial enclosure. This unit is DC powered and it operates with 24 Volts DC input power. It also has a power consumption rating of 23 Watts and an electric current rating of 1.1 Amps. The 92-01940-03 PanelMate 92** interface has a fault relay rating of 2 Amps at 0 to 240 Volts AC inductive load voltage and a rating of 2 Amps at 0 to 28 Volts DC inductive load voltage. It has a temperature rating of T4A according to the CA (CE Code Annex J18) and the US (NEC 500) standards.

The 92-01940-03 PanelMate 92** interface has serial ports with a communication rate that is selectable for 110 to 38,400 baud. Serial Port 1 and Serial Port 2 have a configuration with DB9S connections that are selectable for RS485-2, RS422, or RS232 signal levels. The unit has a peak inrush current of 5 Amps. When properly mounted, the PanelMate 92** interface has an installation rating of Type 12, Type 4X, or Type 4. This dual-scan color interface has an operating temperature range between 0 and 40 degrees Celsius and a non-operating temperature range between -20 and 60 degrees Celsius. It has a tolerable non-condensing relative humidity range between 20 and 90 percent. It can withstand a vibration of 1G at a frequency of 10 to 500 Hertz and a shock of 30 G. The interface weighs 4 pounds (1.8 kilograms) and it has dimensions of 10.5 by 7.8 by 3.5 inches (26.7 by 19.7 by 8.9 centimeters).